Pyrolysis of wood at high temperature: The influence of experimental parameters on gaseous products
2011
Commandré, J.-M. | Lahmidi, H. | Salvador, S. | Dupassieux, N.
The pyrolysis of wood was carried out in an Entrained Flow Reactor at high temperature (650 to 950°C) and under rapid heating conditions (>10³Ks⁻¹). The influence of the diameter and initial moisture of the particle, reactor temperature, residence time and the nature of the gaseous atmosphere on the composition of the gaseous products has been characterised. Particle size, between 80–125 and 160–200μm, did not show any impact. Pyrolysis and tar cracking essentially happen in very short time period: less than 0.6s; the products yields are only slightly modified after 0.6s in the short residence times (several seconds) of our experiments. Higher temperatures improve hydrogen yield in the gaseous product while CO yield decreases. Under nitrogen atmosphere, after 2s at 950°C, 76% (daf) of the mass of wood is recovered as gases: CO, CO₂, H₂, CH₄, C₂H₂, C₂H₄ and H₂O. Tests performed under steam partial pressure showed that hydrogen production is slightly enhanced.
显示更多 [+] 显示较少 [-]