Analysis of the vane test considering size and time effects
1999
Pérez Foguet, Agustí | Ledesma Villalba, Alberto | Huerta, Antonio | Universitat Politècnica de Catalunya. Departament d'Enginyeria Civil i Ambiental | Universitat Politècnica de Catalunya. Departament d'Enginyeria del Terreny, Cartogràfica i Geofísica | Universitat Politècnica de Catalunya. MSR - Mecànica del Sòls i de les Roques | Universitat Politècnica de Catalunya. LACÀN - Mètodes Numèrics en Ciències Aplicades i Enginyeria
An analysis of the vane test using an Arbitrary Lagrangian-Eulerian formulation within a finite element framework is presented. This is suitable for soft clays for which the test is commonly used to measure in situ undrained shear strength. Constitutive laws are expressed in terms of shear stress-shear strain rates, and that permits the study of time effects in a natural manner. An analysis of the shear stress distributions on the failure surface according to the material model is presented. The effect of the constitutive law on the shear band amplitude and on the position of the failure surface is shown. In general, the failure surface is found at 1-1·01 times the vane radius, which is consistent with some experimental results. The problem depends on two dimensionless parameters that represent inertial and viscous forces. For usual vane tests, viscous forces are predominant, and the measured shear strength depends mainly on the angular velocity applied. That can explain some of the comparisons reported when using different vane sizes. Finally, the range of the shear strain rate applied to the soil is shown to be fundamental when comparing experimental results from vane, triaxial and viscosimeter tests. Appart from that, an experimental relation between undrained shear strength and vane angular velocity has been reproduced by this simulation.
显示更多 [+] 显示较少 [-]Peer Reviewed
显示更多 [+] 显示较少 [-]Postprint (author’s final draft)
显示更多 [+] 显示较少 [-]