Study of the Formation of Hydrates with NaCl, Methanol Additive, and Quartz Sand Particles

During deepwater drilling, testing, production, or hydrate mining, the circulating medium in the wellbore may contain solid particles, such as rock chips and sand, in addition to drilling fluids, gas, and water. In the high-pressure, low-temperature conditions of deep water, gas intrusion can easily combine with free water in the drilling fluid to form hydrates, increasing the drilling risk. Therefore, understanding the formation patterns of hydrates in drilling fluids is of significant importance for the prevention and control of hydrates. This study utilized a small-scale high-pressure reactor to investigate the impact of the stirring rate, NaCl, and methanol additives, as well as the sand content on the hydrate formation process and gas consumption. The results indicate that the hydrate formation process can be divided into an induction stage, a rapid formation stage, and a slow formation stage. The induction stage and rapid formation stage durations are significantly reduced under stirring conditions. In NaCl and methanol solutions, hydrate formation is inhibited, with the induction stage duration increasing with higher concentrations of NaCl and methanol. There was no apparent rapid formation stage observed. The final gas consumption decreases substantially with increasing concentrations of NaCl and methanol, reaching no significant hydrate formation at a 20% concentration. The sand content has a significant impact on the slow formation stage, with the final gas consumption increasing within a certain range (in this work, at a sand content of 20%), and being notably higher than in the pure water system under the same conditions.