Adaptability of a moisture analyzer equipped with a halogen heater to the measurement of water content of unhulled rice
2016
Ida, R. (Tokyo Agricultural Research Association, Ome, Tokyo (Japan). Ome Experiment Station)
The water content of unhulled rice is conventionally measured by the ordinary pressure drying method and the electrical resistance method. In the former method 5 g of crushed specimen is dried at 106.5 +- 1degC for five hours (referred to as 105degC method). The latter is a method using the electricity type water meter guaranteed for the measurement precision within 0.5% of the standard error of the 105degC method. On the other hand, a halogen moisture analyzer with high accuracy and low cost properties has been developed in recent years. However, the drying of unhulled rice by this analyzer has not been reported. This study was carried out to clarify the setting conditions of measuring the water content of unhulled rice using a MOC63u moisture analyzer equipped with a halogen heater in relation to the weight of the sample and the measurement mode (drying mode, measurement ending mode). As a result, the optimum measurement condition was programmed with delta Wsub(1) and delta Wsub(2) in rapid mode using 5 g of ground sample where delta Wsub(1) denotes the change in water rate of 0.5% 30 /s at the maximum temperature for rapid drying, and delta Wsub(2) denotes that of 0.03% 30 /s at 135degC at the end of drying. The value obtained using this method showed deviation of 0.06 +- 0.07% (mean value +- standard error) from the value obtained by the 105degC method which was closely related with that obtained with 10 g kernel by the 135degC-24 hr method. The proposed method can markedly reduce measurement time to 8 min and 18 s (498 +- 21 s, mean value +- standard error) compared with the 5th in the 105degC method. It was concluded that this method is widely applicable for the measurement of water content of unhulled rice for investigation of yield.
显示更多 [+] 显示较少 [-]