Use of mathematical modeling to extend the scope of application for the procedure of measuring the mass of 235U in solid radioactive waste
2019
Rykov,Nikita | Bezhunov,Gennady | Gorbachev,Vyacheslav
The known dependence of absolute efficiency on energy and space for particular measurement conditions is used to determine the mass (activity) of 235U in solid radioactive waste by gamma-spectrometric method. The ISOCS system makes it possible to avoid laborious and time-consuming calibration measurements using standard samples to obtain the absolute efficiency curve due to using the so-called characterized detector having a file with a set of efficiencies for various measurement geometries. In many cases, the establishment of standard samples with parameters covering the 235U mass measurement range in the variation intervals of influencing factors, including density, non-uniformity, isotopic composition, geometry, etc., is very expensive and, most often, not feasible. With regard for this, a computational and experimental approach is used based on results obtained by Monte Carlo method using the MCNP code with variation of the key influencing parameters in a broad range. Calculations were performed for detector-recorded spectra of gamma quanta from casks containing waste differing in the density of the cask content (the density was calculated with regard for the uranium contained in waste) – from 0.016 to 1 g/cm3, in the mass of uranium in waste – from 0.64 g to 2 kg, and in the matrix material – graphite, cellulose, quartz, cellulose with 20 % of iron dust. Applicability boundaries have been defined for the developed procedure to measure uranium-containing waste in terms of the material matrix (~ 2.2 %) and its density (~ 10 %) and the contribution of the uranium mass uncertainty in the cask (5 % for nonporous matrices, 10 % for porous matrices) to the obtained result has been estimated.
显示更多 [+] 显示较少 [-]