Experimental Investigation on the Effects of Cutting Direction and Joint Spacing on the Cuttability Behaviour of a Conical Pick in Jointed Rock Mass
2025
Han-Eol Kim | Min-Seong Kim | Wan-Kyu Yoo | Chang-Yong Kim
In this study, a series of rock cutting tests was conducted using a conical pick to investigate the effect of joints on roadheader performance. Tests were performed on intact rock and jointed rock mass specimens with three different joint spacings. The results indicate that cuttability is enhanced in jointed rock mass compared to intact rock due to the influence of joints on fracture mechanics. When cutting perpendicular to the joint plane, joints shorten the fracture path for rock chip formation, reducing the cutting force (<i>FC</i>). In parallel cutting, the joint plane acts as a barrier to side-crack propagation, leading to a further reduction in <i>FC</i>. The <i>FC</i> and specific energy (<i>SE</i>) were generally lower in parallel cutting than in perpendicular cutting. However, when the cutting depth exceeded 0.2 times the joint spacing and the line spacing surpassed 0.4 times the joint spacing, this trend reversed. This occurred because joints hindered the interaction between adjacent cuts, causing a transition to an unrelieved cutting mode. Additionally, <i>FC</i> and <i>SE</i> increased with joint spacing. When joint spacing reached ten times the cutting depth, their values approached those of intact rock. This suggests that the joint effect becomes negligible. These findings provide a better understanding of the effect of joints on roadheader performance.
显示更多 [+] 显示较少 [-]