Physicochemical Properties and Phosphorus Adsorption Capacity of Ceramsite Made from Alum Sludge
2023
Li Shi | Xiaohong Zhao | Yongxiang Cao | Hongjuan Ma | Xuejun Sun
Alum sludge is an inevitable by-product from the water purification process, which had been applied as substrates in some constructed wetlands with good performance, especially for phosphorus (P) adsorption. The raw alum sludge is similar to a clay lump with an irregular shape, and there is a concern of it leaching into water. For better reuse, herein, some sludge was fired to produce alum sludge ceramsite (ASC) with a uniform spherical shape via a four-step process of kneading the sludge ball, air drying, preheating at 400 °:C for 10 min, and firing at 600 °:C for 5 min. Meanwhile, an air-dried alum sludge ball (adASB) was manufactured for comparison. The physicochemical properties and P adsorption ability of ceramsite were investigated subsequently. Through XRD and FT-IR tests, there was no obvious difference between ASC and adASB on the phase structure, but there was a certain amount of Al-OH group loss on the surface of ASC. The structure of ASC was still amorphous, similar to adASB, while ASC possessed more micropore structure and a bigger specific surface area than adASB. Adsorption experiments showed the P adsorption behaviors of ASC and adASB were much similar, and their adsorption kinetics were in accordance with the two-step adsorption kinetics rate equation and pseudo-second-order kinetics equation. The maximum adsorption capacities of ASC and adASB fitted by the Langmuir model were 1.66 mg/g and 1.89 mg/g, respectively. It should be pointed out that, compared with other adsorbents, the ASC produced in this study still had a greater ability to adsorb P. Therefore, ASC should have a great application potential for P removal in wastewater treatment in China.
显示更多 [+] 显示较少 [-]