Effect of Frother Type on Surface Properties and Flotation Performance of Galena: A Comparative Study of EH, PPG250, and MIBC
2025
Yunus Emre Cavdar | Ilayda Asil | Saleban Mohamed Muse | Feridun Boylu | Orhan Ozdemir
The selection of suitable frothers in flotation processes plays a crucial role in controlling bubble formation, foam stability, and ultimately mineral recovery. Therefore, understanding the interfacial behavior of frothers is important to optimize flotation efficiency, especially for valuable sulfide minerals such as galena (PbS). In this study, the interfacial behavior and flotation performance of different frothers in PbS flotation were investigated with a particular focus on surface tension, bubble coalescence, foam stability, and flotation recovery. A high-purity crystalline PbS sample (&asymp:96.65% PbS) obtained from Trabzon, Tü:rkiye, was subjected to systematic experimental analyses including surface tension measurements, critical coalescence concentration (CCC) determination, dynamic foam stability (DFS) tests using the DFA100 analyzer, and micro-flotation experiments. 2-ethylhexanol (EH), polypropylene glycol 250 (PPG250), and methyl isobutyl carbinol (MIBC) were used as frothers, while potassium ethyl xanthate (PEX) was employed as a collector. The results revealed that EH had the highest surface activity (42.67 mN/m at 1000 ppm), and the lowest CCC value (~2 ppm) compared to PPG250 (~3 ppm) and MIBC (~8 ppm). According to the micro-flotation results, the flotation recovery gradually increased with increasing frother dosage: the highest recoveries were obtained with PPG250 (99.45%), EH (98.31%), and MIBC (95.17%). PPG250 and EH achieved higher flotation performance at lower dosages compared to MIBC. These findings highlight the critical role of molecular structure and interfacial properties in the effective selection of frothers for galena flotation.
显示更多 [+] 显示较少 [-]