细化搜索
结果 51-60 的 71
Evaluation of Salinity Tolerance on New Selected Almond × Peach Hybrid Rootstocks
2021
ghada soliman | shimaa farhan
The main objective of this investigation was to evaluate the determination effect of salt tolerance of five new almond× peach hybrid rootstocks namely hybrid 1, 2, 3, 4 and 5 through their vegetative growth parameters and chemical concentrations. This evaluation aimed to recommend these rootstocks for the commercial use. This experiment was carried out at the Horticulture Research Institute, Agriculture Research Center, Giza, Egypt, during two successive seasons (2018-2019 and 2019- 2020) respectively. Rootstocks chosen for this study included new almond× peach rootstocks which are resistant to nematode. Salinity irrigated water included four levels of NaCl salt which was 500, 1000, 1500, 2000 ppm and the control which was the usual irrigated water. Results cleared that increasing salinity levels led to reduction in all growth parameters including seedling stem diameter, heights, average leaves number and buds per one, leaf area, fresh and dry weights. High salinity levels declined gradually mineral concentrations like N, P, K, Mg%, Fe and Mn ppm. Moreover the highest level of salinity conducted to the highest level of Na and Cl ppm concentrations. Chlorophyll values take the same trend while proline values take the opposite trend with high salinity due to it considered an indicator to high salinity. Moreover, there were differences between rootstocks to salinity tolerance. Hybrid No.5 was the most resistant hybrid to high salinity concentration followed by hybrid No.4 while hybrid No.3 was the least one. Hybrid No.5 reached the highest values of growth parameters and it shared with hybrid No.4 the highest values of N, P and K, Mg concentrations and the highest levels of Fe, Mn, Na and Cl. Chlorophyll values take the same trend with slightly differences with hybrid No.4. On the other hand hybrid No.3 was the least hybrid in all growth measurements, mineral concentration and chlorophyll except proline concentration it recorded the highest value. From the above investigation we can recommend hybrid number5 or hybrid number4 which had the best results compared to other seedlings rootstock under experiment salinity conditions.
显示更多 [+] 显示较少 [-]Economic Efficiency Analysis of Mango Farms Inputs in Ismailia Governorate
2021
Mohamed Esmail Nofal | Bahaa El-Din Morsy | hussein sarhan
Mango is considered one of the most important fruit crops in Egypt due to its widespread cultivation compared to other fruit crops and in addition to its importance as an important fruit crop it comes in third place after both citrus, oranges, grapes in terms of its contribution to the monetary value of the total Egyptian agricultural exports, and can be crystallized the problem of studying in the possibility of answering questions about what is the concept of the optimal economic size of the farm? What are the factors affecting farm sizes? What are the different measures of farm sizes? What is the optimal economic size of mango farms in new and old lands? To what extent is there a moral impact on the productive efficiency of the farm in question? The research aims generally to measure the optimal size of mango farms in new and old lands and estimate the production functions to identify the value of the marginal output of the various factors of production and estimated the total productivity flexibility of the function by about 1.07 this indicates that the increase of these production elements by the estimated function of 10% leads to an increase in the total output of the acre of mango by about 10.7 % which means an increase in the yield of capacity. The marginal output and average output per productive component were derived from the total output function of the study sample as table (1) showed that the (M.P) for both human labor and nitrogen fertilizer was estimated at about 0.018, 0.029 tons for those productive elements on The order as estimated the value of the marginal product of these productive elements about 210.42, 339.01 pounds respectively.
显示更多 [+] 显示较少 [-]Obesity Assessments of Housewives in Great Cairo, Egypt
2021
Asmaa Abdel-Rahman | Ramadan Mahmoud | Mohamed Khallaf | Doaa H. El Sabakhawi
A cross sectional study was conducted to evaluate obesity of housewives. The Sample that comprised of 200 females was selected from different regions of great Cairo, Egypt. Age was affected the BMI of various investigated obesity classes with a high correlation. A similar finding was also detected in case of education status where such parameter was also greatly affected the BMI status. The occupation, marital status and family size did not show any significant effect in BMI. The Income parameter didn't show any significant with the BMI. So, it could be concluded that only age and education status are greatly affected the housewives obesity in the investigated sample. Life style, i.e the sports practice. The type of sport, the time spent for sport practice, the place sports practice, household works making by herself, the number of times household works practice/week, the time of sleep in day and the time of last meal before sleeping were statistically significant with the BMI. Anthropometric measurements (waist circumference, waist-to-height ratio and central obesity) are greatly affecting the BMI meaning that there is a significant difference among various investigated obesity classes owing to such anthropometric factors. Regarding to the height parameter, no significant difference was found between overweight as well as obesity class I each other, and similar finding was also found between obesity class 11as well as obesity class III. The second variable (i.e., IBW%) had no significant effect among the three obesity classes (I, II and III), while the overweight group was significantly differed rather than that of others. Considering the Central obesity variable, statistical analyses proved that no significance was detected with overweight or obesity class II. group. Similar trend was also, noticed in case of (hip circumference) in relative to obesity class I and obesity class II.
显示更多 [+] 显示较少 [-]The Role of Quality Systems in Developing Egyptian Agricultural Exports
2021
maha elnamky | Salwa Abdel Monem | Hussein Sarhan
The quality of agricultural exports is one of the most important foundations on which to develop and improve these exports to global markets. Therefore, studying the effect of applying quality standards on increasing agricultural exports is one of the most important determinants for improving the system of those exports. By studying the relative importance of agricultural crops in the research sample, which is represented by potatoes and onions from vegetable crops, oranges and grapes from fruit crops, it was found that exports of potatoes and onions represent about 25%, 21% of total vegetable exports as an average for the period (2014-2018), while orange exports represent About 53% of fruit exports are about 24% of the average fruit exports for the aforementioned period. By studying the effect of applying quality standards on agricultural crops from the beginning of production for export, it was found that applying these standards leads to a reduction in agricultural losses from the crop by a rate ranging between (20-15) %. Also, the application of quality standards leads to an increase in the costs of production and marketing of the crop, but in return, the increase in costs can be compensated for by the increase in profit through higher prices at home and abroad, in addition to benefiting from the percentage of losses that are saved. With regard to the actual effect of implementing quality, the results concluded that the rate of change before the application of quality and after the application in relation to an increase in the production of the best crop is orange by 50%. The potato crop came with a 500% increase in profits, and about 355% of the return on the pound per ton.
显示更多 [+] 显示较少 [-]Econometric Analysis of the Cane Sugar Industry Determinants in Egypt
2021
Karima Elsoghier | Salwa Abdel Moneim | Mohamed shehata
Sugar is an industrial agricultural commodity of strategic importance at the global level. At the local level, the sugar industry from the cultivation of sugar cane is considered an ancient industry that was supplemented by the manufacture of beets and the extraction of sugar from it. The research problem was represented in the existence of a sugar food gap estimated at 875.8 thousand tons of sugar as an annual average for the period (2000-2018). To fill this gap, the state imports sugar from abroad to meet the deficit. It is aimed study the current situation of the sugar industry in Egypt by analyzing the food gap for it and raise the rate of self-sufficiency in sugar. Then, the study was concerned with estimating the variables affecting each of the area and quantity of supplied cane, as well as the supply price, and the efficiency of sugar extraction on the function of the operating efficiency of cane sugar manufacturing factories in the main governorates (Minya, Sohag, Qena, Luxor, and Aswan), during the average period (2016- 2018). Similarly, these variables affecting the aforementioned cane yield can be estimated on the function of the amount of sugar produced/ operating day of the cane sugar factories in the governorates of Egypt during the same period, using the Panel Data analysis. The most important results of the study revealed the following:1-The results show that the variable 𝑙𝑛 𝑥10𝑡 that expresses the average price of supplying a ton of cane during the study period is significant and has a negative sign, as shown in the model estimating the equation of the operational efficiency ratio, as an increase in the average price of supplying a ton of cane by 10% will lead to The operational efficiency decreased at a rate of about 3.11%. 2- It is also evident from the results of the model estimating the equation of the amount of sugar produced for one working day that the variable 𝑙𝑛 𝑥6𝑡 that expresses the degree of sweetness of sugar produced from sugar manufacturing factories during the same period, it is significant and its sign is positive, as an increase in the degree of sugar sweetness by 1% will lead to an increase in quantities Sugar produced from manufacturing per day at a rate of about 19.6%. 3- It is clear from the measures of economic efficiency for the production of cane sugar, the relative superiority of farmers of the Arab Republic of Egypt during the period (2013-2018), which is attributed to the response of the farmers’ lands to the production elements used in them, due to the high degree of fertility of their lands, and the increase in the accumulated experiences of the farmers.
显示更多 [+] 显示较少 [-]Using Thermochemical Materials as a Heat Source for Poultry Egg Incubation
2021
shaymaa hasan | Mahmoud Elattar | Moubark Moustafaa | Marwa Abdo
This study aims to use one thermochemical storage materials system as a heat source for poultry egg incubation. Three types of activated thermochemical storage materials (TCMs) were used as an energy storage medium. These materials are Silica gel self-indicating (blue/pink), commercial white Silica gel, and Natural Zeolite. An open thermochemical system was applied inside a poultry egg incubator. The TCMs were humidified by the vapor produced from the evaporation of the water by an ultra-sonic humidifier at atmospheric pressure. The thermal recovery process aims to release the stored energy in TCMs. Two types of poultry egg incubator used during this study. The first one was the traditional poultry incubator (electricity incubator). The traditional egg incubator dimensions were 57×66×59 cm with capacity of 125 hen egg- 76 hatching. The second one was the prototype of a thermochemical poultry egg incubator. The thermochemical poultry egg incubator contained sensors to control and measure the temperature and humidity inside the incubator. The designed incubator egg dimensions were 56x39x28.5 cm, with a capacity of 25 eggs. The total heat losses by the wall and ventilation were 9.8 and 1.5W, respectively. The heat production by 25 eggs due to metabolic activities was 3.65 W. The total energy needed for the incubation process was 36.09W. The container of storage material with dimensions of 35x35x5 cm with 3.5 kg capacity allocated inside the incubator. The container's surface is covered with aluminum sheet with 0.5 mm thickness supplied with fins. The egg tray is placed on the aluminum sheet, and the eggs were placed horizontally in the tray. The energy consumption for traditional and thermochemical incubators for 21 days was 19.25 kWh and 11.2 kWh, respectively. The energy saving by thermochemical prototype incubator was 41.8%. The percentage of hatchability for traditional and prototype incubator was 80.9% and 71.4%, respectively.
显示更多 [+] 显示较少 [-]Assessment of Water and Sediments Quality of Kitchener Drain Nile Delta - Egypt
2021
Eman Abd-Elfattah | Abd El Azeez Sheta | Mohammed Saifeldeen | Somaya Hassanein | Yahia Mahmoud
Kitchener drain isconsideredone of the largest drains in the Nile delta. The current study aimed to assess water quality and level of some chemical and biological pollutants in both the water and sediments of Kitchener drain. The studied water quality parameters included nitrate (NO3-), phosphate (PO43-), total solids (TS), total suspended solids (TSS) and total dissolved solids (TDS), in addition, water and sediment samples were exposed to bacteriological analysis which included, total coliform (TC) bacteria, faecal coliform (FC) bacteria and Salmonella&Shigella (SS). The results showed that nitrate (NO3-) and phosphate (PO43-) concentrations in most sampling sides were within the permitted Food and Agriculture Organization (FAO) limits for irrigation water. In addition, all the values of total suspended solids (TSS) and total dissolved solids concentrations (TDS) in El-Gharbia governorate were higher than the World Health Organization (WHO) permitted limits. Bacteriological results revealed that most sampling sites were contaminated with both TC and FC bacteria where, the counts of them in the water samples exceeded the 1,000 CFU/100 ml which is higher than the WHO limits. In addition, the counts of studied organisms in all examined sediment samples were higher compared to water samples. Based on these results the water in Kitchener drain is considered unsuitablefor domestic and agricultural purposes.
显示更多 [+] 显示较少 [-]Optimization of Polyunsaturated Fatty Acids (PUFAs) Production from Olive Cake by Pseudomonas fluorescens NBRC14160 using Response Surface Methodology and their Application in Kareish Cheese Manufacture
2021
Samah Abu-Hussien | Mohamed Abo El-Naga
The aim of this study was to optimize the production of polyunsaturated fatty acids (PUFAs), using the response surface methodology (RSM), to use the produced PUFAs in kareish cheese processing. PlackettBurman design (PBD) was employed to screen media components that affect PUFAs development (glucose, olive cake, yeast extract, tryptone, MgSO4, KH2PO4, NH4Cl, agitation speed, incubation time, and pH), and results showed that olive cake and yeast extract, with confidence level > 98%, had a positive effect on PUFAs production. The central composite design (CCD) of the response surface methodology was used to optimize the selected parameters levels where maximum PUFAs production (1790 mg/l) was observed near the mid-point (0) values (concentrations) of olive cake (15 g/l), tryptone (7.5 g/L) and KH2PO4 (1.25 g/l). Polyunsaturated fatty acids account for 47.83 % of the total fatty acid profile, according to gas chromatography analysis of the collected PUFAs. The produced PUFAs was encapsulated using whey protein concentrate and maltodextrin, freeze dried, grinded and incorporated in Kareish cheese manufacture. The average particle size of a 0.005% suspension of oil microcapsules was 671.4 nm with a poly dispersity index of 0.611 indicating a moderate stability of the emulsion. The negative zeta potential of the microcapsules particles was -37.6 mv, which is identical to the -42 mv value recorded in the literature for oil emulsions stabilized by whey protein, maltodextrin, and K-carrageenan. The addition of 0.5 % PUFAs-containing microcapsules to Kareish cheese increased antioxidative activity to 38.13 % compared to 30.14 % for the control, as well as Texture profile analysis (TPA) parameters including hardness, cohesiveness, gumminess, and chewiness. The elasticity of the Kareish cheese sample increased slightly by the addition of 0.5% microcapsules, but higher concentration tended to change the elasticity to a brittleness of the cheese structure.
显示更多 [+] 显示较少 [-]An Economic Analysis Study of the Structural Composition of the Labor Market in the Egyptian Agricultural Sector
2021
shady abdelmawgud | dirar alotaibi | Hossam Abdul Aziz
يAgricultural production is characterized by seasonality that leads to an imbalance in agri-cultural labor market. However, this is pre-sumably due to the imbalance between the sea-sonal agricultural labor demand and supply, thus, resulting seasonal unemployment. This paper aims to investigate and analyze the struc-ture of Egyptian agricultural labor market throughout the period 2000-2020 via employ-ing econometric tools. The results show that, the agricultural disguised employment does not consider permeant agricultural labor its source, but rather it is due to seasonal agricul-tural employment, due to its negative marginal productivity, in which is the main cause for disguised unemployment appearance.
显示更多 [+] 显示较少 [-]A Study on Pesticide Sprayer Powered by Solar Energy Appropriate for Small Farms
2021
AHMED El-Sayed | Abdel-Fadil Kabany | Waleed Elhelew
The study was conducted on a knapsacksprayer powered by a DC motor through a 12 V lead acid battery charged from a solar panel (photovoltaic) directed to sun rays. The system was installed and tested in the western desert on a small-scale farm at Frafra Oasis (New val-ley). This study aimed to evaluate and develop a knapsack sprayer powered by a solar energy for overcoming operator fatigue and shortage of traditional energy in Egypt’s western desert. The experiments were conducted during the period which starts in August 2019 till Febru-ary 2020. The main parts of the system consist of photovoltaic (PV) or solar cells, charger controller, rechargeable battery, and DC motor speed control with dimmer and pump which was attached with a tank 20 liters capacity for sucking and pressurizing the liquid to the boom of the sprayer through a flexible hose. The main results of experiments were as fol-lows: The time for recharging the battery com-pletely was found 330 minutes (5.5 hours) to charge completely from 10.55 V – 13.85 V, with current intensity 1.67 Ampere. The bat-tery discharge time was varied due to drop the battery voltage from 13.85 – 10.55 Volts. De-pending on the motor speed, which is the time for discharging the battery was found 4 – 9 hours, when motor pulled 0.85 - 1.85 Amps at 2000 - 3400 rpm and this time at deferent speed is enough to spray area 3 - 6.82 fed/day "day work = 6 hours" with application rate 67 - 104.7 l/fed. The number of droplets and the area coverage percentage ranges from 30 – 146.33 drops and 13.96 – 27.97% for one cm2 of simulator targets at a speed ranging from 2000 – 3400 rpm, respectively.
显示更多 [+] 显示较少 [-]