OBJECTIVE To describe methods to measure the 3-D orientation of the proximal, diaphyseal, and distal segments of the canine radius by use of computer-aided design software (CADS) and to compare the repeatability and reliability of measurements derived by those methods. SAMPLE 31 canine radii with biapical deformities and 24 clinically normal (control) canine radii. PROCEDURES Select CT scans of radii were imported into a CADS program. Cartesian coordinate systems for the humerus and proximal, diaphyseal, and distal radial segments were developed. The orientation of each radial segment in the frontal, sagittal, and transverse planes was measured in triplicate by 3 methods. The repeatability and reliability of those measurements were calculated and compared among the 3 measurement methods. RESULTS The mean ± SD within-subject repeatability of radial angular measurements for all 3 methods was 1.40 ± 0.67° in the frontal plane, 3.17 ± 2.21° in the sagittal plane, and 3.01 ± 1.11° in the transverse plane for control radii and 2.56 ± 1.95° in the frontal plane, 3.59 ± 2.39° in the sagittal plane, and 3.47 ± 1.19° in the transverse plane for abnormal radii. Mean ± SD bias between radial measurement methods was 1.88 ± 2.07° in the frontal plane, 6.44 ± 6.80° in the sagittal plane, and 2.27 ± 2.81° in the transverse plane. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that use of CADS to assess the 3-D orientation of the proximal, diaphyseal, and distal segments of normal and abnormal canine radii yielded highly repeatable and reliable measurements.

This study aimed to determine the numbers, directions, localizations, diameters, morphometric values of the nutrient foramina (NF) in humerus of domestic mammals and to reveal the differences between the right and left humerus in animal species. In the study, a total of 223 humerus, large ruminants (56), small ruminants (60), equidae (29), sus (24), carnivora-dog (42), and carnivora-cat (12), were examined in the Department of Anatomy, Faculty of Veterinary Medicine, Van Yuzuncu Yil University. The numbers, shapes, directions, localization sites and localized surfaces of the NF’s were observed with the naked eye, and recorded. The locations of the NF’s were confirmed by calculating the Foraminal Index (FI). The diameters of the NF’s were measured using 1.2 mm (18 Gauge: G), 0.9 mm (20 G), 0.7 mm (22 G), 0.55 mm (24 G), and 0.1 mm (34 G) needles. In animal species, morphometric measurements were taken such as total length of the humerus (TLH), distance between the NF with the proximal end of the humerus (NFP), distance between the NF with the distal end of the humerus (NFD), FI and performed statistical analysis of the measured values.There was found a single NF in 99% of the examined humerus in the study. In general, it was seen that the NF’s were directed downwards, and located in the middle 1/3 with lower 1/3 segments. NF’s were determined to be localized to the facies caudalis in 100% of sus, in 93% of large ruminants and carnivoradogs, and in 85% of small ruminants; however, in equidae and carnivora-cats were all localized to the margo medialis. According to the statistics, no statistically significant difference (p>0.05) was observed between the right and left humerus NF measurement values in terms of morphometric properties. But only, the diameter of the NF in the small ruminants was statistically significant (p<0.05).It was found that the morphological and morphometric differences of NF’s in right and left humerus of domestic mammals. Moreover, in these animals, it is thought that the study may help veterinary clinicians and surgeons in evaluating of the pathological conditions related to humeral NF and planning of the operative applications to be performed in this region.

Objective-To assess gait abnormalities associated with selective anesthesia of the suprascapular nerve (SSN) achieved by use of perineural catheterization and thereby determine the function of that nerve as it relates to gait in horses. Animals-3 adult horses with no preexisting clinically apparent lameness at a walk. Procedure-Each horse was anesthetized; the right SSN was exposed surgically for placement of a perineural catheter to permit delivery of 1 mL of 2% mepivacaine hydrochloride. Six hours after recovery from anesthesia, each horse was videotaped while walking (50-step data acquisition period) before and after administration of mepivacaine. Videotapes were reviewed and the proportion of abnormal steps before and after selective SSN anesthesia was assessed. A step was considered abnormal if a marked amount of scapulohumeral joint instability (ie, lateral luxation of the proximal portion of the humerus) was observed during the weight-bearing phase of the stride. Results-Clinically apparent gait dysfunction was detected in all 3 horses following perineural administration of the local anesthetic agent. Anesthesia of the SSN resulted in scapulohumeral joint instability as evidenced by consistent lateral excursion of the shoulder region during the weight-bearing phase of gait at a walk. The proportion of abnormal steps before and after SSN anesthesia was significantly different in all 3 horses. Conclusions and Clinical Relevance-These data support the role of the SSN in shoulder joint stability in horses and define SSN dysfunction as 1 mechanism by which the syndrome and gait dysfunction clinically referred to as sweeny may develop.

We evaluated the single-cycle structural properties for axial compression, torsion, and 4-point bending with a central load applied to the caudal or lateral surface of a diaphyseal segment from the normal adult equine humerus, radius, third metacarpal bone, femur, tibia, and third metatarsal bone. Stiffness values were determined from load-deformation curves for each bone and test mode. Compressive stiffness ranged from a low of 2,690 N/mm for the humerus to a high of 5,670 N/mm for the femur. Torsional stiffness ranged from 558 N.m/rad for the third metacarpal bone to 2,080 N.m/rad for the femur. Nondestructive 4-point bending stiffness ranged from 3,540 N.m/rad for the radius to 11,500 N.m/rad for the third metatarsal bone. For the humerus, radius, and tibia, there was no significant difference in stiffness between having the central load applied to the caudal or lateral surface. For the third metacarpal and metatarsal bones, stiffness was significantly (P < 0.05) greater with the central load applied to the lateral surface than the palmar or plantar surface. For the femur, bones were significantly (P < 0.05) stiffer with the central load applied to the caudal surface than the lateral surface. Four-point bending to failure load-deformation curves had a bilinear pattern in some instances, consisting of a linear region at lower bending moments that corresponded to stiffness values from the nondestructive tests and a second linear region at higher bending moments that had greater stiffness values. Stiffness values from the second linear region ranged from 4,420 N.m/rad for the humerus to 13,000 N.m/rad for the third metatarsal bone. Differences in stiffness between nondestructive tests and the second linear region of destructive tests were significant (P < 0.05) for the radius, third metacarpal bone, and third metatarsal bone. Difference between stiffness values of paired left and right bones was not detected for any test. Four-point bending ultimate failure bending moments ranged from 260 N.m for the femur to 940 N.m for the third metatarsal bone. There was no difference in failure bending moment between the directions of applied central load for a given bone.

Of 143 Greyhounds necropsied consecutively, 6 (4%) had chondrocalcinosis of the scapulohumeral joint; lesions were identified in 6 additional dogs. Lesions were seen exclusively in the humeral head, mainly in the plateau region. The lesions in the dogs of the initial group were unilateral, but 2 of the 6 additional dogs had bilateral lesions. Focal mineralization of articular cartilage appeared as a white raised nidus, sometimes surrounded by a translucent halo in the opaque cartilage. Circular, small translucent cartilage foci, with or without beginning mineralization, were adjacent to definitive chondrocalcinosis lesions. Chondrocyte necrosis and matrix degradation were considered to antedate appearance of matrical mineral granules; mineralization of the cartilage was considered a secondary process, but not necessarily an epiphenomenon. Scanning electron microscopy indicated that the chondrocalcinosis lesion was composed of deposits of irregularly fused stone material that, in scanning and transmission electron micrographs, was composed of irregular spheroids, 0.05 to 0.5 micrometer in diameter. The spheroids contained poorly formed needle-like crystals of apatite. Sparse transformation of the mineral phase into hydroxyapatite was considered to be attributable to a biological mechanism that inhibited phase transition. Cartilage degeneration and chondrocalcinosis of the plateau region of the humeral head appear to be unique lesions that develop in young Greyhounds. It is possible that these lesions are the result of the biomechanical stress of training and racing.

We performed dual-energy x-ray absorptiometry (craniocaudal and lateromedial views) on 10 pairs of humeruses, radiuses, femurs, and tibias from dogs, using an alignment jig, to determine the homotypic bone mineral density variations of long bones. The bones were divided into 3 regions: proximal, middle, and distal parts of the diaphysis. The bone mineral density of cortical bone, medullary bone, and total bone was determined. Of 160 homotypic comparisons, 21 indicated significant (P less than or equal to 0.05) differences between right and left bones at either a region or location. These differences were observed most frequently in the craniocaudal view and were probably secondary to positioning errors. Evaluation of elliptical bones, such as the radius, also indicated that, when the thicker dimension, such as the lateromedial view of the radius was measured, the bone mineral density of regions-of-interest in that view was greater than that in the opposite view (ie, craniocaudal view of the radius). This study validates the concept of using the contralateral limb as the control condition in orthopedic studies of dogs, particularly when evaluating the densitometric properties of long bones. This study also emphasizes the importance of accurate positioning to prevent inadvertent alteration of bone mineral density results when using dual-energy x-ray absorptiometry. Dual-energy x-ray absorptiometry is particularly susceptible to positioning errors, because it converts a 3-dimensional structure into a 2-dimensional image.

A percutaneous biopsy technique for the study of endochondral bone formation in the dog was developed. With the dogs under general anesthesia or sedated with a combination of a tranquilizer and a local anesthetic, biopsy specimens were obtained from the proximal growth plate of the humerus with the use of a Jamshidi bone biopsy needle. Biopsy specimens were structurally intact, and contained epiphysis, growth plate, and metaphysis. The procedure proved to be a simple, safe technique, which caused minimal discomfort for the patient and did not affect the growth of the proximal end of the humerus, even after multiple biopsies.

OBJECTIVE To assess 3-D geometry of the humerus of dogs and determine whether the craniocaudal canal flare index (CFI) is associated with specific geometric features. SAMPLE CT images (n = 40) and radiographs (38) for 2 groups of skeletally mature nonchondrodystrophic dogs. PROCEDURES General dimensions (length, CFI, cortical thickness, and humeral head offset), curvature (shaft, humeral head, and glenoid cavity), version (humeral head and greater tubercle), and torsion were evaluated on CT images. Dogs were allocated into 3 groups on the basis of the craniocaudal CFI, and results were compared among these 3 groups. The CT measurements were compared with radiographic measurements obtained for another group of dogs. RESULTS Mean ± SD humeral head version was −75.9 ± 9.6° (range, −100.7° to −59.4°). Mean mechanical lateral distal humeral angle, mechanical caudal proximal humeral angle, and mechanical cranial distal humeral angle were 89.5 ± 3.5°, 50.2 ± 4.5°, and 72.9 ± 7.8°, respectively, and did not differ from corresponding radiographic measurements. Mean humeral curvature was 20.4 ± 4.4° (range, 9.6° to 30.5°). Mean craniocaudal CFI was 1.74 ± 0.18 (range, 1.37 to 2.10). Dogs with a high craniocaudal CFI had thicker cranial and medial cortices than dogs with a low craniocaudal CFI. Increased body weight was associated with a lower craniocaudal CFI. Radiographic and CT measurements of craniocaudal CFI and curvature differed significantly. CONCLUSIONS AND CLINICAL RELEVANCE CT-based 3-D reconstructions allowed the assessment of shaft angulation, torsion, and CFI. Radiographic and CT measurements of shaft curvature and CFI may differ.

OBJECTIVE To perform 3-D inverse dynamics analysis of the entire forelimb of healthy dogs during a walk and trot. ANIMALS 5 healthy adult Beagles. PROCEDURES The left forelimb of each dog was instrumented with 19 anatomic markers. X-ray fluoroscopy was used to optimize marker positions and perform scientific rotoscoping for 1 dog. Inverse dynamics were computed for each dog during a walk and trot on the basis of data obtained from an infrared motion-capture system and instrumented quad-band treadmill. Morphometric data were obtained from a virtual reconstruction of the left forelimb generated from a CT scan of the same dog that underwent scientific rotoscoping. RESULTS Segmental angles, torque, and power patterns were described for the scapula, humerus, ulna, and carpus segments in body frame. For the scapula and humerus, the kinematics and dynamics determined from fluoroscopy-based data varied substantially from those determined from the marker-based data. The dominant action of scapular rotation for forelimb kinematics was confirmed. Directional changes in the torque and power patterns for each segment were fairly consistent between the 2 gaits, but the amplitude of those changes was often greater at a trot than at a walk. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that control of the forelimb joints of dogs is similar for both a walk and trot. Rotation of the forelimb around its longitudinal axis and motion of the scapula should be reconsidered in the evaluation of musculoskeletal diseases, especially before and after treatment or rehabilitation.

The bicipital tendons and bursae of 25 healthy adult Quarter Horses were ultrasonographically examined. Cross-sectional images of the right and left bicipital tendons were obtained from each horse, using a 7.5-MHz transducer held in the frontal plane at the point of the shoulder. The bicipital tendon at the point of the shoulder appeared as a bilobate structure overlying the echogenic surface of the humerus. Median distance from the skin surface to the cranial surface of the tendon on the medial sagittal plane of the tendon was 23 mm (range, 16.5 to 30 mm); median distance on the lateral sagittal plane was 14 mm (range, 8.5 to 19 mm). Median distance from the skin surface to the tendon on the midsagittal plane of the tendon was 17 mm (range, 10.5 to 22 mm). Median cranial-to-caudal widths of the lateral and medial lobes of the tendon at their greatest dimensions were 20.5 mm (range, 18 to 27.5 mm) and 16 mm (range, 13 to 20.5 mm), respectively. The median cranial-tocaudal width of the central (midsagittal) portion of the tendon was 10 mm (range, 7 to 13.5 mm). The bicipital bursa was less than or equal to 3 mm wide at all locations at which it was measured. Ultrasonographic imaging was easily performed and allowed evaluation of the bicipital tendon, bursa, and surface of the underlying humerus.