The Black Sea is a semi-enclosed basin subject to major anthropogenic pressures, including marine litter and plastic pollution. Due to numerous large rivers draining into the basin and a population settled along the coast, the region could accumulate significant amounts of floating litter over time. Until now, only limited field data were available, and litter quantities and distribution remained unknown. In this study, floating marine macro litter (FMML) was assessed at the regional Black Sea scale for the first time, showing relatively high litter densities across the basin that reached a weighted mean of 81.5 items/km(2). Monitoring data revealed an accumulation of floating items offshore in the eastern part of the basin, resembling on a small scale a "garbage patch', where litter items were trapped, showing elevated densities in comparison to their surrounding areas. Most of these items were made of plastic materials (ca. 96%) and included large numbers of plastic and poly-styrene fragments of small size ranges (2.5-10 cm). Harmonised field data collection through consistent and regular monitoring programmes across the region is essential to establish baselines and thresholds for large scale assessment at international level.

The authors regret that this is not a review document, but a Research Paper. The authors would like to apologise for any inconvenience caused.

Plastic pollution in the natural environment is causing increasing concern at both the local and global scale. Understanding the dispersion of plastic through the environment is of key importance for the effective implementation of preventive measures and cleanup strategies. Over the past few years, various models have been developed to estimate the transport of plastics in rivers, using limited plastic observations in river systems. However, there is a large discrepancy between the amount of plastic being modelled to leave the river systems, and the amount of plastic that has been found in the seas and oceans. Here, we investigate one of the possible causes of this mismatch by performing an extensive uncertainty analysis of the riverine plastic export estimates. We examine the uncertainty from the homogenisation of observations, model parameter uncertainty, and underlying assumptions in models. To this end, we use the to-date most complete time-series of macro-plastic observations (macroplastics have been found to contain most of the plastic mass transported by rivers), coming from three European rivers. The results show that model structure and parameter uncertainty causes up to four orders of magnitude, while the homogenisation of plastic observations introduces an additional three orders of magnitude uncertainty in the estimates. Additionally, most global models assume that variations in the plastic flux are primarily driven by river discharge. However, we show that correlations between river discharge (and other environmental drivers) and the plastic flux are never above 0.5, and strongly vary between catchments. Overall, we conclude that the yearly plastic load in rivers remains poorly constrained.

Surfactants, after use, enter the environment through diffuse and point sources such as irrigation with treated and non-treated waste water and urban and industrial wastewater discharges. For the group of non-ionic synthetic surfactant alcohol ethoxylates (AEOs), most of the available information is restricted to the levels and fate in aquatic systems, whereas current knowledge of their behavior in soils is very limited. Here we characterize the behavior of different homologs (C12-C18) and ethoxymers (E03, E06, and E08) of the AEOs through batch experiments and under unsaturated flow conditions during infiltration experiments. Experiments used two different agricultural soils from a region irrigated with reclaimed water (Guadalete River basin, SW Spain). In parallel, water flow and chemical transport were modelled using the HYDRUS-1D software package, calibrated using the infiltration experimental data. Estimates of water flow and reactive transport of all surfactants were in good agreement between infiltration experiments and simulations. The sorption process followed a Freundlich isotherm for most of the target compounds. A systematic comparison between sorption data obtained from batch and infiltration experiments revealed that the sorption coefficient (K-d) was generally lower in infiltration experiments, performed under environmental flow conditions, than in batch experiments in the absence of flow, whereas the exponent (beta) did not show significant differences. For the low clay and organic carbon content of the soils used, no clear dependence of K-d on them was observed. Our work thus highlights the need to use reactive transport parameterization inferred under realistic conditions to assess the risk associated with alcohol ethoxylates in subsurface environments. (C) 2020 The Authors. Published by Elsevier Ltd.

Gulls commonly rely on human-generated waste as their primary food source, contributing to the spread of antibiotic-resistant bacteria and their resistance genes, both locally and globally. Our understanding of this process remains incomplete, particularly in relation to its potential interaction with surrounding soil and water. We studied the lesser black-backed gull, Larus fuscus, as a model to examine the spatial variation of faecal bacterial communities, antibiotic resistance genes (ARGs), and mobile genetic elements (MGEs) and its relationship with the surrounding water and soil. We conducted sampling campaigns within a connectivity network of different flocks of gulls moving across functional units (FUs), each of which represents a module of highly interconnected patches of habitats used for roosting and feeding. The FUs vary in habitat use, with some gulls using more polluted sites (notably landfills), while others prefer more natural environments (e.g., wetlands or beaches). Faecal bacterial communities in gulls from flocks that visit and spend more time in landfills exhibited higher richness and diversity. The faecal microbiota showed a high compositional overlap with bacterial communities in soil. The overlap was greater when compared to landfill (11%) than to wetland soils (6%), and much lower when compared to bacterial communities in surrounding water (2% and 1% for landfill and wetland water, respectively). The relative abundance of ARGs and MGEs were similar between FUs, with variations observed only for specific families of ARGs and MGEs. When exploring the faecal carriage of ARGs and MGEs in bird faeces relative to soil and water compartments, gull faeces were enriched in ARGs classified as High-Risk. Our results shed light on the complex dynamics of antibiotic resistance spread in wild bird populations, providing insights into the interactions among gull movement and feeding behavior, habitat characteristics, and the dissemination of antibiotic resistance determinants across environmental reservoirs.

A crucial factor in the long-term survival of benthic macrophyte communities under light-reduction stress is how they balance carbon metabolism during photosynthesis and respiration. In turn, the dissolved organic carbon (DOC) released by these communities, which can be highly light-dependent, stands as a source of carbon, fuelling marine communities and playing an important role in the ocean carbon sequestration. This is the first study to evaluate light-reduction stress and recovery in the seagrass Zostera noltei and the macroalga Caulerpa prolifera. Light reduction led to a significant decrease in the production of both communities from autotrophic to heterotrophic. Results indicated that most of the DOC released by vegetated coastal communities comes from photosynthetic activity, and that the net DOC fluxes can be greatly affected by shading events. Finally, both communities showed resilience underpinned by high recovery but low resistance capacity, with C. prolifera showing the highest resilience to unfavourable light conditions.

Numerical models point to the south-east Bay of Biscay as a convergence area for floating particles, including plastics. The few existing studies on plastic abundance in the area mainly focus on open waters and yet information on the coastal area is limited. To fill this gap, neustonic samples were taken along the coastal waters of the south-east Bay of Biscay (2017-2020) to define the spatial distribution of plastic abundances and composition. Results show an average plastic abundance of 739,395 +/- 2,625,271 items/km(2) (998 +/- 4338 g/km(2)). French waters were more affected, with five times higher plastic abundances than Spanish coasts. Microplastics represented 93 % of the total abundance of plastic items (28 % in weight), mesoplastics 7 % (26 %) and macroplastics 1 % (46 %). This study demonstrates that this area is a hotspot for plastic with levels in coastal waters similar to those in the Mediterranean Sea or other litter aggregation areas.

Microplastics (MPs) were characterized in surficial marine sediment (n = 36) and mussel (n = 29) samples collected along the British Columbia (BC) coast, Canada, using visual identification and Fourier Transform Infrared Spectrometry. MPs counts averaged 32.6 ± 5.3 particles per kg in sediment and 0.38 ± 0.04 particles per individual mussel (0.24 ± 0.04 /g of tissue). Victoria Harbour and the North Coast (Prince Rupert area) were MP hotspots, likely resulting from a combination of local sources and oceanographic conditions. Microfibers <1000 μm dominated the pattern in both matrices (61.1 % in sediment; 65.4 % mussels) highlighting the suspected role of textiles in the widespread distribution of MPs in the marine environment. Overall, polyester was dominant in sediment and mussels (54.1 % and 63.5 %, respectively), followed by polyethylene (16.2 % and 11.5 %, respectively). This is the first report of MPs in sediment and mussels along the coast of BC using standardized methods.

Despite the large research effort on reporting quantities of coastal litter, the dynamics of this litter is not yet sufficiently understood. Litter inputs in five cobble beaches located in the Mediterranean (Spain) were studied over three months during winter by biweekly litter tagging. Plastic represented the dominant material that reached the beaches (77%). In remote and narrow beaches, storms constituted the main driver in litter dynamics, favouring the accumulation of floating items such as plastic bottles and wood fragments as well as the largest but contrasting effects, increasing litter inputs and outputs from the beach, respectively. In rural beaches, beach users, mainly fisher people, but also tourists, contributed to a notable input of litter to the beach. Burial and exhumation of litter were reported as common occurring processes. Better management actions are required to improve beach environmental quality. | This research is a contribution to the Andalusia PAI Research Group "RNM-328" and to the Ibero-American Beach Management and Certification Network -PROPLAYAS. This work was supported by the Biodiversity Foundation of the Ministry for the Ecological Transition and Demographic Challenge from Spain [FBIOMARINA19-01]. Special thanks go to David Saez, Natalia Sanchez, Laura Valero and Alba Amat for their help during the sampling periods and thanks to "Puertos del Estado" for oceanographic data. Thanks are also given to the municipalities involved in this research for answering to enquires about beach cleaning modalities. Finally, special thanks to two anonymous reviewers for their useful comments and suggestions, which have been very helpful in improving the manuscript.

Microplastics (MPs) were investigated at 19 sandy beaches along the eastern Mediterranean Moroccan coast. Sediment samples (5 mm–63 μ m) were analyzed to identify MPs abundance, size, shape, color and nature. MPs concentration ranged from 40 ± 7.4 to 230 ± 48.6 MPs kg 1 ; fibrous MPs were the most abundant (74.72 %), followed by fragments (20.26 %), films (3.27 %), pellets (1.42 %) and foams (0.33 %). Large MPs (1–5 mm) accounted for 58 %, while small (< 1 mm) for 42 %. The 1–2 mm fraction of sediments presented the greatest amounts (30.67 %) of MPs. Transparent (50 %) and blue (17 %) were most common colors and most of particles were angular and irregularly shaped. Fourier Transform Infrared Spectroscopy (FTIR) analysis showed that PE (Polyethylene), PS (Polystyrene) and PP (Polypropylene) and PVC (Polyvinyl chloride) were the most common polymers. These findings revealed a moderate level of microplastic pollution along the beaches of the eastern Moroccan Mediterranean coast.