细化搜索
结果 1-5 的 5
Synthesis and characterization of activated carbon from biowaste-walnut shell and application to removal of uranium from waste
2020
Yaman, M. | Demirel, M. H.
The aim of this study is to synthesize and characterize an economical and environmentally-friendly adsorbent with high adsorption capacity. For this purpose, the walnut shells (Juglans regia L.) were chemically modified using sulfuric and citric acids, separately. After pyrolysis and synthesis of activated carbon (AC), the optimization of conditions at the preconcentration/removal step was performed using parameters such as pH and contact time for uranium in the model solutions. The measurements were carried out by inductively coupled plasma-mass spectrometry (ICP-MS). From the shapes of the BET isotherms, it may be stated that activated carbon exhibit type I. It was found that the surface area and total pore volume of the activated carbon were 696.6 m2/g and 0.35 mL/g, respectively. The adsorption capacity was found to be 220 mg/g. It was found that the optimum pH is 6.0 for preconcentration/removal using AC obtained by sulfuric acid as chemically-modifier. The optimized method was applied to determination of U at ng/mL levels in the model solutions.
显示更多 [+] 显示较少 [-]Application of Ti3C2(OH)2 MXene Nanosheets as a Potential Adsorbent and Photocatalyst for Degradation of Organic Dye in Aqueous Media
2023
Hasani Khaneghahi, Batool | Dehghan Abkenar, Shiva | Gilnejad, Javad | Ganjali, Mohammad Reza | Hosseini, Morteza
In this work, single layered Ti3C2(OH)2 MXene nanosheets have been successfully prepared through a facile approach by etching Ti3AlC2 with alkaline solution treatment (KOH with minimum amounts of water). The structure and morphology of the produced nanosheets were evaluated through X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) analysis and the chemical composition was determined using an energy dispersion X-ray (EDX) spectrometer. Methylene Blue (MB) as a target pollutant adsorption and photocatalytic degradation tests were subsequently performed to assess the functionalities of hydroxyl-terminated MXene. MB removal using Ti3C2(OH)2 MXene in the dark in 20 minutes achieved an absorption-desorption balance of 51.2%, and then MB was degraded within 80 minutes under UV light irradiation with great efficiency. Our results presented that the powder of as produced exhibited good photocatalytic activity for three cycles photodegradation. The first-order rate constant (k) was calculated to be 0.0372 1/min. About 97% degradation of Methylene Blue dye in the solution was confirmed within 80 min of exposure to ultraviolet light.
显示更多 [+] 显示较少 [-]Biosorption of Reactive Red 120 Dye from Aqueous Solutions by using Mahagoni (Swietenia mahagoni) Wood and Bark Charcoal: Equilibrium, and Kinetic Studies
2021
Chakraborty, Tapos Kumar | Ghosh, Gopal | Akter, Mst. Nowshin | Adhikary, Keya | Islam, Md. Shahnul | Ghosh, Prianka | Zaman, Samina | Habib, Ahsan | Kabir, A. H. M. Enamul
This study analyzed the potential use of Mahagoni wood charcoal (MWC) and Mahagoni bark charcoal (MBC) as biosorbent for reactive red 120 (RR 120) dye removal from aqueous solutions. The effect of different operating parameters such as contact time (1–210 min), pH (3–11), adsorbent dose (1–20 g/L), and initial RR 120 concentration (5–70 mg/L) on adsorption processes was studied under batch adsorption experiments. The maximum removal of RR 120 by MWC (78%) and MBC (88%) was achieved when the optimum conditions were initial RR 120 concentration (5 mg/L), pH (3), adsorbents dose (10 g/L) and equilibrium contact time (150 min). The RR 120 adsorption data of MWC and MBC were better described by the Langmuir and Freundlich isotherm models, respectively. The MWC and MBC showed maximum adsorption capacities of 3.806 and 5.402 mg/g, respectively. Kinetic adsorption data of all adsorbents (MWC and MBC) followed the pseudo-second-order model and this adsorption process was controlled by chemisorption with multi-step diffusion. A lower desorption rate advocated that both strong and weak binding forces could exist between RR 120 molecules and adsorbents. The study results revealed that the utilization of either MWC and or MBC as an adsorbent for treating RR 120 is effective and environmentally friendly.
显示更多 [+] 显示较少 [-]The Use of Raw and Thermally-Modified Calcareous Sludge Generated in Stone Cutting Industry for Sulfur Dioxide Removal
2019
Loghmani, F. | Mirghaffari, N. | Soleimani, M.
Management of solid wastes is considered as an economic and environmental issue in the building stone industry. The current study uses raw and calcined calcareous sludge, generated in the stone cutting factories, in order to remove sulfur dioxide. Sludge characterization has been performed, using X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) analyses. The removal experiments of sulfur dioxide have conducted under different humid contents and adsorbent doses. The results showed that the higher the adsorbent dosage and humidity content, the greater the SO2 adsorption.. The calcination process at temperatures of 400, 500, 600, and 700℃ revealed that with rising calcination temperature and humidity content, the adsorbent capability is enhanced considerably. This method could be developed for the management of stone sludge produced from the stone cutting industry through its conversion into an effective and low-cost adsorbent for desulfurization process.
显示更多 [+] 显示较少 [-]Evaluation of Cadmium Removal from the Water in Phytoremeiation Process Using Eichhornia crassipes
2017
Asrari, Elham | Avatefi Nezhad, Goltab
Conserving water resources and protecting them from pollution are of high account in the natural cycle of our life. This study has tried to determine the refining potential and capacity of water hyacinth (Eichhornia crassipes) in order to remove the cadmium from water, studying the influence of factors such as initial concentration of cadmium, contact time, absorbent mass, and pH. Results have shown that the best efficiency of cadmium, more than 99%, was obtained in the optimum conditions (i.e. retention time of 30 hours, adsorbent dose of three plants (12 stems), and pH=6.6). By increasing the initial concentration of cadmium from 0.28 to 8.28 mg/L, the elimination efficiency did not change; moreover, by increasing the absorbent mass, the elimination efficiency increased from 98.4 to 99.8 and the lowest retention time was obtained for the balance. All experiments have been repeated three times, showing in the end that water hyacinth is able to absorb cadmium up to 8.28 mg/L. This process follows Freundlich isotherm (R2=0.98). Results of this study indicate that this plant can grow well at high levels of cadmium and the growth of water hyacinth is better in the presence of cadmium than control conditions (city water). Finally, it can be concluded that it is necessary to provide a reliable, cheap, and fast method to eliminate pollution. Eichhornia crassipes, a promising plant with great functionality, can be used as a refiner in order to eliminate the heavy metals in wastewater (sewage) effluents, particularly industrial sewage.
显示更多 [+] 显示较少 [-]