Aspergillus fumigatus is the primary agent of invasive aspergillosis (IA) causing high morbidity and mortality in immunocompromised patients. Triazole resistance in A. fumigatus and its sources have gained wide attention. For several years, environmental fungicides use has been proposed as the major cause for triazole resistance in A. fumigatus. However, there are few studies on azole-resistant A. fumigatus (ARAF) selected by triazole fungicides in agricultural systems. We studied the possible emergence of ARAF in the field after exposure to triazole fungicide tebuconazole. Our results showed that exposure to tebuconazole in soil selects for resistance to triazoles in A. fumigatus. The probability of ARAF developing in soils depends upon the concentrations of tebuconazole after application. We suggest that tebuconazole applications should be minimized to reduce selective pressure for the generation of ARAFs.

Fungi have an exceptional capability to flourish in presence of heavy metals and pesticide. However, the mechanism of bioremediation of pesticide (lindane) and multimetal [mixture of cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), zinc (Zn)] by a fungus is little understood. In the present study, Aspergillus fumigatus, a filamentous fungus was found to accumulate heavy metals in the order [Zn(98%)>Pb(95%)>Cd(63%)>Cr(62%)>Ni(46%)>Cu(37%)] from a cocktail of 30 mg L⁻¹ multimetal and lindane (30 mg L⁻¹) in a composite media amended with 1% glucose. Particularly, Pb and Zn uptake was enhanced in presence of lindane. Remarkably, lindane was degraded to 1.92 ± 0.01 mg L⁻¹ in 72 h which is below the permissible limit value (2.0 mg L⁻¹) for the discharge of lindane into the aquatic bodies as prescribed by European Community legislation. The utilization of lindane as a cometabolite from the complex environment was evident by the phenomenal growth of the fungal pellet biomass (5.89 ± 0.03 g L⁻¹) at 72 h with cube root growth constant of fungus (0.0211 g¹/³ L⁻¹/³ h⁻¹) compared to the biomasses obtained in case of the biotic control as well as in presence of multimetal complex without lindane. The different analytical techniques revealed the various stress coping strategies adopted by A. fumigatus for multimetal uptake in the simultaneous presence of multimetal and pesticide. From the Transmission electron microscope coupled energy dispersive X-ray analysis (TEM-EDAX) results, uptake of the metals Cd, Cu and Pb in the cytoplasmic membrane and the accumulation of the metals Cr, Ni and Zn in the cytoplasm of the fungus were deduced. Fourier-transform infrared spectroscopy (FTIR) revealed involvement of carboxyl/amide group of fungal cell wall in metal chelation. Thus A. fumigatus exhibited biosorption and bioaccumulation as the mechanisms involved in detoxification of multimetals.

Airborne bacteria and fungi are important biological components of bioaerosol and play an important role in the conservation environmental. A microbiological study on bioaerosoles was carried out at the Municipal Waste Utilization Plant in Northern Poland and at points located beyond the facility at the distance of 150, 450, 1000 and 1250 m. The highest emission of bioaerosol occurred in the area of the waste landfill site and during compost pile turning. The total number of mesophilic bacteria, filamentous fungi and actinomycetes reached the values up to 104 CFU/m3. Strong air contamination with mannitol-positive and mannitol-negative staphylococci occurred remarkably more frequently in the area of the test facility than in the points beyond it. The number of indicator bacteria of Pseudomonas fluorescens was quite changeable and did not depend on a distance from pollutant emission source. The number of Escherichia coli rods remained at the low level of about 102 CFU/m3, and they were only isolated sporadically in the points beyond the landfill. The highest percentage of bacterial aerosol comprised Gram-positive cocci, and then Gram-positive bacilli. Mycological analyses confirmed the presence in the studied air of fungi with potentially allergic and mycotoxinogenic properties, such as: Aspergillus fumigatus, A. niger, A. terreus, Cladosporium herbarum and the genus Fusarium. The concentration level of microbial bioaerosol several times exceeded the threshold values recommended by the Polish Standards. The factors influenced the concentration of microorganisms in the tested air included the distance of the active landfill, weather conditions and the season.

Bioaerosols are conglomerates of biological particles such as bacterial and fungal propagules and are produced in sewers and sewage treatment plants through evaporation and turbulence. In order to evaluate the hazard to employees in wastewater treatment plants, airborne microorganisms were measured at two different sites in the sewage systems and in the grit chamber of a treatment plant. Two additional samples were taken during high-pressure cleaning in the relief sewer. Outdoor air samples served as background values. Airborne microorganisms were collected using the impaction method with the MAS-100® and the impingement method with the SKC Biosampler®. The concentrations of coliform bacteria as well as the fungal species Aspergillus fumigatus were determined in addition to mesophilic bacteria counts (cfu/m³). The highest concentrations of mesophilic bacteria were found in the encased grit chamber. Coliform bacteria were found infrequently only in the aerosol of the sewage systems; A. fumigatus was detected at all sampling sites both indoors as well as outdoors. During high-pressure cleaning, total bacteria concentrations reached up to 4.0 × 104 cfu/m3, coliforms up to 3.0 × 103 cfu/m3. These results show that personnel protective measures should be recommended to decrease the exposure risk to biological particles.

The removal of total petroleum hydrocarbons (TPHs) from contaminated mining soil was carried out under in vitro conditions. The aerobic consumption of TPH in the slow bioremediation stage via biostimulation with native microorganisms and biostimulation-bioaugmentation with autochthonous fungal isolates was evaluated. The initial TPH concentration was 70,880 ± 975 mg TPH/kg soil, soil was amended with nutrients at a C:N:P ratio of 100:15:1, the water content was adjusted to the soil field capacity, and batch microcosm reactors were incubated at room temperature (20.5 ± 3.1°C) for 90 days. The bioaugmentation process was tested using four hydrocarbonoclastic fungal strains isolated from the same contaminated mining soil individually and a mixed culture of the four isolates. The molecular characterization of the isolated fungi was based on sequence analysis of 18S rRNA, and the fungi were identified as Aspergillus niger MT786339.1, Aspergillus fumigatus MT786338.1, Aspergillus terreus MT786341.1, and Aspergillus flavus MT786340.1. The best TPH removal was achieved by inoculation with the fungal consortium (57 ± 1.97%) at 45 days (slow stage) after initiating the biostimulation process, followed by inoculation with Aspergillus niger (49 ± 1.2%), Aspergillus terreus (44 ± 0.67%), Aspergillus fumigatus (35 ± 0.98%), and Aspergillus flavus (32 ± 0.38%), while the degradation rate achieved with native microorganisms was only 21.6 ± 1.5%; statistical analysis of the results showed significant differences.

This study aimed to determine the mycoremediative capacity of filamentous fungi consortia in landfill heavy metal contaminated soil. Streak plate method was utilized for the isolation of fungi from the landfill soil. Isolates were identified using morphological and molecular techniques. Heavy metal tolerance of the fungi was determined using radial growth diameter technique. Twelve species of landfill indigenous fungi were used for the bioremediation process. Two categories of fungi consortia namely highly tolerant fungi (Perenniporia subtephropora, Daldinia starbaeckii, Phanerochaete concrescens, Cerrena aurantiopora, Fusarium equiseti, Polyporales sp., Aspergillus niger, Aspergillus fumigatus, and Trametes versicolor) and moderately tolerant fungi (Paecilomyces lilacinus, Antrodia serialis, and Penicillium cataractum) were used to amend the contaminated soil; meanwhile, the unamended soil served as control. Maximum tolerance index of 1.0 was reported in Cr-, Cu-, and Fe-amended PDA medium. Meanwhile, the maximum heavy metal bioremoval efficiencies were for highly tolerant fungal consortium treated soil and were recorded as As (62%) > Mn (59%) > Cu (49%) > Cr (42%) > Fe (38%). Likewise, the maximum metal removal rate constant (K) and the half-lives (t₁/₂) were 0.0097/day 71 days, 0.0088/day 79 days, 0.0067/day 103 days, 0.0054/day 128 days, and 0.0048/day 144 days for As, Mn, Cu, Cr, and Fe, respectively, which were all for soil treated with consortium of highly tolerant fungi (P. subtephropora, D. starbaeckii, P. concrescens, C. aurantiopora, F. equiseti, Polyporales sp., A. niger, A. fumigatus, and T. versicolor). Spectra analysis revealed a clear distinction in the functional groups between the fungal treated and the untreated soils. Peaks at 874 ± 2 cm⁻¹ and 1425 ± 2 cm⁻¹ were only found in fungi amended soil. Physicochemical parameters mainly pH and redox potential played a key role in the bioremediation process, and bioaccumulation was believed to be the favored mechanism for the metal bioremoval. The data are suitable for assessing the contribution of bioaugmentation with consortia of fungi. It is equally important for assessing the synergistic effect of fungi on the reduction of extractable heavy metals in contaminated soil.

Wastewater treatment plants (WWTPs) can be significant sources of antifungal resistant fungi, which can disseminate further in the environment by getting into rivers together with effluents discharged from WWTPs and pose a risk for human health. In this study, the presence of azole resistance was determined in fungal isolates from treated effluents of two WWTPs using the standard microdilution method from Clinical and Laboratory Standards Institute (CLSI). A total of 41 fungal isolates representing 23 fungal species and 16 fungal genera were obtained. Fungal genera related to the known human and/or plant pathogens such as Aspergillus, Fusarium, and Candida were detected. Among the observed species, the susceptibility of Aspergillus fumigatus and Fusarium oxysporum was tested against fluconazole (FCZ), ketoconazole (KTZ), itraconazole (ITZ), and voriconazole (VCZ). The isolate A. fumigatus was susceptible to KTZ, ITZ, and VCZ, while it showed resistance against FCZ. On the contrast, the isolate F. oxysporum showed resistance to KTZ, ITZ, and VCZ. Comparatively, VCZ showed highest activity against both A. fumigatus and F. oxysporum. Analysis of the gene Cyp51A for the A. fumigatus isolate showed no evidence of drug resistance that could be related to point mutations and/or tandem repeats in the gene. To the best of our knowledge, this is the first susceptibility test study on A. fumigatus and F. oxysporum isolates from the WWTPs of South Africa. In conclusion, this study indicated an urgent need for thorough investigation with larger group of fungal isolates from different regions of South Africa to broadly understand the role of WWTPs in the dissemination of azole antifungal drug resistance.

A biological method was adopted to decolourize textile dyes, which is an economic and eco-friendly technology for textile wastewater remediation. Two fungal strains, i.e. Aspergillus lentulus and Aspergillus fumigatus, were used to study the removal of low to high concentrations (25 to 2000 mg L⁻¹) of reactive remazol red, reactive blue and reactive yellow dyes by biosorption and bioaccumulation. The biosorption was successful only at the lower concentrations. A. lentulus was capable of removing 67–85% of reactive dyes during bioaccumulation mode of treatment at 500 mg L⁻¹ dye concentration with an increased biomass uptake capacity. To cope up with the high dye concentration of 2000 mg L⁻¹, a novel combined approach was successful in case of A. lentulus, where almost 76% removal of reactive remazol red dye was observed during bioaccumulation followed by biosorption. The scanning electron microscopy also showed the accumulation of dye on the surface of fungal mycelium. The results signify the application of such robust fungal strains for the removal of high concentration of dyes in the textile wastewaters.

The conventional treatment process of palm oil mill effluent (POME) produces a highly colored effluent. Colored compounds in POME cause reduction in photosynthetic activities, produce carcinogenic by-products in drinking water, chelate with metal ions, and are toxic to aquatic biota. Thus, failure of conventional treatment methods to decolorize POME has become an important problem to be addressed as color has emerged as a critical water quality parameter for many countries such as Malaysia. Aspergillus fumigatus isolated from POME sludge was successfully grown in POME supplemented with glucose. Statistical optimization studies were conducted to evaluate the effects of the types and concentrations of carbon and nitrogen sources, pH, temperature, and size of the inoculum. Characterization of the fungus was performed using scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, and Brunauer, Emmet, and Teller surface area analysis. Optimum conditions using response surface methods at pH 5.7, 35 °C, and 0.57 % w/v glucose with 2.5 % v/v inoculum size resulted in a successful removal of 71 % of the color (initial ADMI of 3,260); chemical oxygen demand, 71 %; ammoniacal nitrogen, 35 %; total polyphenolic compounds, 50 %; and lignin, 54 % after 5 days of treatment. The decolorization process was contributed mainly by biosorption involving pseudo-first-order kinetics. FTIR analysis revealed that the presence of hydroxyl, C–H alkane, amide carbonyl, nitro, and amine groups could combine intensively with the colored compounds in POME. This is the first reported work on the application of A. fumigatus for the decolorization of POME. The present investigation suggested that growing cultures of A. fumigatus has potential applications for the decolorization of POME through the biosorption and biodegradation processes.

PURPOSE: The aim of this study was to analyze air concentrations of chemical and microbiological pollutants in the vicinity of an organic waste treatment plant, Ecoparc-2, located in Montcada i Reixac (Catalonia, Spain), as well as to determine the seasonal trends. The human health risks due to the presence of those agents were also assessed. METHODS: Air samples were collected at different distances and wind directions from the Ecoparc-2 in two campaigns (winter and summer of 2010). The levels of 19 volatile organic compounds (VOCs) were analyzed by GC-MS or HPLC-UV. In turn, the airborne amount of total bacteria, gram-negative bacteria, and fungi (including Aspergillus fumigatus) was also determined. RESULTS: Mean VOC concentrations were found to be 32.4 and 15.7 μg/m3 in winter and summer, respectively. Fungi at 25°C presented the highest geometric mean (1,126 and 863 cfu/m3 in winter and summer, respectively), while the concentrations of fungi at 37°C and total bacteria were also important in the hot season (332 and 250 cfu/m3, respectively). These results are in agreement with data obtained from the scientific literature. Anyhow, no significant differences were observed between both campaigns including those related to distances and wind directions. The current pollutant levels in the surrounding environment were also various orders of magnitude lower than those recently observed inside the facility. CONCLUSIONS: The human exposure to VOCs near the Ecoparc-2 was estimated to be low. Furthermore, the current environmental concentrations of those chemical and microbiological agents were clearly below threshold values recommended by regulatory organizations.