The Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA) is the first programme to tackle carbon dioxide (CO₂) emissions from a single industry at the global level, to realize the carbon-neutral growth of international flights from 2020 onwards. However, the COVID-19 pandemic has caused a drastic decline in the global aviation industry. The International Civil Aviation Organization (ICAO) has adjusted the CORSIA by removing 2020 emissions from the baseline, which now will only be based on 2019 emissions. We estimate that the total carbon dioxide (CO₂) emissions from global international flights decreased by 70 % from February to July 2020 compared to those in 2019. Our analysis suggests that the annual CO₂ emissions from international flights during the pilot stage of CORSIA (2021–2023) will be far below the revised baseline even if the global aviation industry could embrace an optimistic recovery. The major airline companies will have very limited motivations due to the CORSIA scheme to implement mitigation actions proactively. Therefore, more progressive actions are needed to align the industry recovery of global aviation and climate change mitigation during the post-COVID-19 period.

In this study, the effects of descent flight path angle (between 1.25° and 4.25°) on aircraft gaseous emissions (carbon monoxide, total hydrocarbons and nitrogen oxides) are explored using actual flight data from aircraft flight data recording system and emissions indices from the International Civil Aviation Organization. All emissions parameters are corrected to flight conditions using Boeing Fuel Flow Method2, where the ambient air pressure, temperature and humidity data are obtained from long-term radiosonde data measured close to the arrival airport. The main findings highlight that the higher the flight path angle, the higher the emission indices of CO and HC, whereas the lower the emissions index of NOx and fuel consumption. Furthermore, during a descent, a heavier aircraft tends to emit less CO and HC, and more NOx. For a five-tonne aircraft mass increase, the average change in emissions indices are found to be −4.1% and −5.7% (CO), −5.4% and −8.2% (HC), and +1.1% and +1.6% (NOx) for high and low flight path angle groups, respectively. The average emissions indices for CO, HC and NOx during descent are calculated to be 24.5, 1.7 and 5.6 g/kg of fuel, whereas the average emissions for descending from 32,000 ft (9.7 km) and 24,000 ft (7.3 km) are calculated to be 7–8 kg (CO), ∼0.5 kg (HC) and ∼3 kg (NOx).

The effects of dike construction on the geomorphology and sedimentary processes of tidal flats were investigated using high-precision topographic profiling, short cores, and unmanned aviation vehicle (UAV)-assisted photogrammetry to understand their adverse consequences on the benthic ecosystem. Tidal flats at the south of Shinsi Island near one of the two sluice gates of the Saemangeum dike, display prominent morphologic features known as shelly sand ridges or cheniers (sensu Otvos, 2000) that have migrated landward about 5 m in a year. The tidal flats were dominated by erosion from winter to spring and by deposition during the remainder of the year except for the periods of heavy precipitation when tidal drainage channels became larger and deeper by headward erosion. With overall coarser-grained surface sediments, the presence of actively migrating wave-built cheniers are in stark contrast to muddy tidal flats with a monotonous morphology before the completion of the Saemangeum dike in 2006. Southeasterly waves reflected from the dike during winter to spring when north to northwesterly winds prevail account for the wave-induced onshore sediment transport and rapid morphologic changes in the tidal flats despite their location protected from offshore waves. The diversity and biomass of major macrofauna species tend to increase during rapid erosion and decrease during rapid deposition, highlighting the anthropogenic effect of dike-induced physical disturbance on the benthic ecosystem in the otherwise sheltered tidal flats.

Civil aircraft emissions during landing and takeoff (LTO) are important air pollutant sources, but have been given insufficient attention in China. Accurate estimation of these emissions is limited by a lack of important parameters, such as detailed flight information and the dynamic time in climb and approach modes during LTO that are dependent on mixing layer height (MLH). We developed a flight-time/flight-height relationship using real-time height information in Aircraft Meteorological Data Relay data, and then calculated the actual time for each flight in those two modes based on the actual MLH from meteorological observation. Hourly emissions of civil aircraft were then estimated based on the database of each flight. Total emissions of NOx, CO, SO2, HC and PM from LTO cycles of domestic flights in China during 2015 were 37.78 Gg, 30.25 Gg, 12.00 Gg, 2.38 Gg and 0.75 Gg, respectively. Substantial monthly, daily and hourly variations of emissions due to the flight schedule as well as MLH were calculated. Large differences were found between the new estimation and emissions calculated based on traditional method. Compared with the emissions estimated based on default parameter obtained from International Civil Aviation Organization, the average difference of annual emission among airports with new estimation for various pollutants was approximately 30.3% in climb mode and 81.4% in approach mode; compared with the emissions estimated based on the method proposed by China National Guide, the average difference of annual emission among airports were 37.4% (NOx), 8.4% (CO), 73.1% (HC) and 58.1% (PM) during LTO process. The monthly airport-specific emissions per LTO were also proposed. These can provide necessary and meaningful support for the revision of the values in National Guide.

In this study, the positive matrix factorization (PMF) source apportionment model was employed to quantify the contributions of airport activities to particle number concentrations (PNCs) at Amsterdam Schiphol. Time-resolved particle number size distributions in parallel with the concentrations of auxiliary variables, including gaseous pollutants (NOₓ and CO), black carbon, PM₂.₅ mass, and number of arrivals/departures were measured for 32 sampling days over a 6-month period near Schiphol airport to be used in the model. PMF results revealed that airport activities, cumulatively, accounted for around 79.3% of PNCs and our model segregated them into three major groups: (i) aircraft departures, (ii) aircraft arrivals, and (iii) ground service equipment (GSE) (with some contributions of local road traffic, mostly from airport parking lots). Aircraft departures and aircraft arrivals showed mode diameters <20 nm and contributed, respectively, to 46.1% and 26.7% of PNCs. The factor GSE/local road traffic, with a mode diameter of around 60–80 nm, accounted for 6.5% of the PNCs. Road traffic related mainly to the surrounding freeways was characterized with a mode diameter of 30–40 nm; this factor contributed to 18.0% of PNCs although its absolute PNCs was comparable with that of areas heavily impacted by traffic emissions. Lastly, urban background with a mode diameter at 150–225 nm, had a minimal contribution (2.7%) to PNCs while dominating the particle volume/mass concentrations with a contribution of 58.2%. These findings illustrate the dominant role of the airport activities in ambient PNCs in the surrounding areas. More importantly, the quantification of the contributions of different airport activities to PNCs is a useful tool to better control and limit the increased PNCs near the airports that could adversely impact the health of the adjacent urban communities.

Aircraft soot has a significant impact on global and local air pollution and is of particular concern for the population working at airports and living nearby. The morphology and chemistry of soot are related to its reactivity and depend mainly on engine operating conditions and fuel-type. We investigated the morphology (by transmission electron microscopy) and chemistry (by X-ray micro-spectroscopy) of soot from the exhaust of a CFM 56-7B26 turbofan engine, currently the most common engine in aviation fleet, operated in the test cell of SR Technics, Zurich airport. Standard kerosene (Jet A-1) and a biofuel blend (Jet A-1 with 32% HEFA) were used at ground idle and climb-out engine thrust, as these conditions highly influence air quality at airport areas. The results indicate that soot reactivity decreases from ground idle to climb-out conditions for both fuel types. Nearly one third of the primary soot particles generated by the blended fuel at climb-out engine thrust bear an outer amorphous shell implying higher reactivity. This characteristic referring to soot reactivity needs to be taken into account when evaluating the advantage of HEFA blending at high engine thrust. The soot type that is most prone to react with its surrounding is generated by Jet A-1 fuel at ground idle. Biofuel blending slightly lowers soot reactivity at ground idle but does the opposite at climb-out conditions. As far as soot reactivity is concerned, biofuels can prove beneficial for airports where ground idle is a common situation; the benefit of biofuels for climb-out conditions is uncertain.

The occupational exposure to airborne particles and other pollutants in a high performance jet engine airport was investigated. Three spatial scales were considered: i) a downwind receptor site, ii) close to the airstrip, iii) personal monitoring. Particle number, surface area, mass concentrations and distributions were measured as well as inorganic and organic fractions, ionic fractions and Polycyclic Aromatic Hydrocarbons. Particle number distribution measured at a receptor site presents a mode of 80 nm and an average total concentration of 6.5 × 10³ part. cm⁻³; the chemical analysis shows that all the elements may be attributed to long-range transport from the sea. Particle number concentrations in the proximity of the airstrip show short term peaks during the working day mainly related to takeoff, landing and pre-flight operations of jet engines. Personal exposure of workers highlights a median number concentration of 2.5 × 10⁴ part. cm⁻³ and 1.7 × 10⁴ part. cm⁻³ for crew chief and hangar operator.

Rare earth elements (REE) are a homogenous group of 17 chemical elements in the periodic table that are key to many modern industries including chemicals, consumer electronics, clean energy, transportation, health care, aviation, and defense. Moreover, in recent years, they have been used in agriculture. One of the consequences of their worldwide use is the possible increase of their levels in various environmental compartments. This review addresses major topics concerning the study of REE in the soil environment, with special attention to the latest research findings. The main sources of REE to soils, the contents of REE in soils worldwide, and relevant information on the effects of REE to plants were explored. Ecological and human health risk issues related to the presence of REE in soils were also discussed. Although several findings reported positive effects of REE on plant growth, many questions about their biological role remain unanswered. Therefore, studies concerning the actual mechanism of action of these elements on cellular and physiological processes should be further refined. Even more urgent is to unveil their chemical behavior in soils and the ecological and human health risks that might be associated with the widespread use of REE in our modern society.

This paper aims to find mechanisms to align commercial interests with underwater noise reductions from commercial shipping. Through a survey and a series of interviews with representative stakeholders, we find that while acknowledging the wide variations in ports' specificities, port actions could support the reduction in underwater noise emissions from commercial shipping through changes in hull, propeller and engine design, and through operational measures associated with reduced speed, change of route and travel in convoy. Though the impact of underwater noise emissions on marine fauna is increasingly shown to be serious and wide-spread, there is uncertainty in the mechanisms, the contexts, and the levels which should lead to action, requiring precautionary management. Vessels owners are already dealing with significant investment and operating costs to comply with fuel, ballast water, NOx and CO2 requirements. To be successful, underwater noise programs should align with these factors. Based on a multiple criteria decision making (MCDM) approach, we find a set of compromise solutions for a wide range of stakeholders. Ports could propose actions such as discounted port fees and reduced ship waiting times at ports, both depending on underwater noise performance. Cooperation between ports to scale up actions through environmental indexes and classification societies' notations, and integration with other ports' actions could help support this. However, few vessels know their underwater noise baseline as there are very few hydrophone stations, and measurement methodologies are not standardized. Costs increase and availability decreases dramatically if the vessel buyer wants to improve the noise profile. Local demands regarding airborne noise close to airports boosted global pressure on the aviation industry to adopt existing quieting technology. This experience of the aviation noise control could inform the underwater noise process.

There has been a continuously growing trend in international commercial air traffic, with the exception of COVID-19 crises; however, after the recovery, the trend is expected to even sharpen. The consequences of released emissions and by-products in the environment range from human health hazards, low air quality and global warming. This study is aimed to investigate the role of aviation emissions in global warming. For this purpose, data on different variables including global air traffic and growth rate, air traffic in different continents, total global CO₂ emissions of different airlines, direct and indirect emissions, air traffic in various UK airports and fuel-efficient aircraft was collected from various sources like EU member states, Statista, Eurostat, IATA, CAA and EUROCONTROL. The results indicated that in 2019, commercial airlines carried over 4.5 × 10⁹ passengers on scheduled flights. However, due to the COVID-19 pandemic in 2020, the global number of passengers was reduced to 1.8 × 10⁹, representing around a 60% reduction in air traffic. Germany was the largest contributor to greenhouse gas (GHG) from the EU, releasing 927 kt of emissions in 3 years. In the UK, Heathrow airport had the highest number of passengers in 2019 with over 80 million, and the study of monthly aircraft movement revealed that Heathrow Airport also had the highest number of EU and International flights, while Edinburgh had the domestic flights in 2018. These research findings could be beneficial for airlines, policymakers and governments targeting the reduction of aircraft emissions.