In this study, functional microbial sequencing, quantitative PCR, and phylogenetic investigation of communities by reconstruction of unobserved states (PICRUSt) were employed to understand the microbial mechanisms related to the effects of bamboo charcoal (BC) and bamboo vinegar (BV) on the degradation of organic matter (OM) and methane (CH₄) emissions during composting. BC + BV resulted in the highest degradation of OM. BV was most effective treatment in controlling CH₄ emissions and it significantly reduced the abundance of the mcrA gene. Methanobrevibacter, Methanosarcina, and Methanocorpusculum were closely related to CH₄ emissions during the thermophilic composting period. PICRUSt analysis showed that BC and/or BV enhanced the metabolism associated with OM degradation and reduced CH₄ metabolism. Structural equation modeling indicated that BC + BV strongly promoted the metabolic activity of microorganisms, which had a positive effect on CH₄ emissions. Together these results suggest that BC + BV may be a suitable composting strategy if the aerobic conditions can be effectively improved during the thermophilic composting period.

To assess organochlorine compound (OC) contamination, its possible sources, and adverse health impacts on giant pandas, we collected soil, bamboo, and panda fecal samples from the habitat and research center of the Qinling panda (Ailuropoda melanoleuca qinlingensis)—the rarest recognized panda subspecies. The polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) concentrations were comparatively low which suggests that moderate sources of OC pollution currently. OC levels were lower in samples from nature reserve than in those collected from pandas held in captivity, and OC levels within the reserve increased between functional areas in the order: core, buffer and experimental. The distribution patterns, and correlation analyses, combined with congener distributions suggested PCBs and OCPs originated from similar sources, were dispersed by similar processes, being transported through atmosphere and characterized by historical residues. Backward trajectory analyses results, and detected DRINs (aldrin, dieldrin, endrin and isodrin) both suggest long-range atmospheric transport of pollution source. PCBs pose potential cancer risk, and PCB 126 was the most notable toxicant as assessed be the high carcinogenic risk index. We provide data for health risk assessment that can guide the identification of priority congeners, and recommend a long-term monitoring plan. This study proposes an approach to ecotoxicological threats whereby giant pandas may be used as sentinel species for other threatened or endangered mammals. By highlighting the risks of long-distance transmission of pollutants, the study emphasizes the importance of transboundary cooperation to safeguard biodiversity.

Release of antibiotics into the environment, which often occurs downstream of wastewater treatment plants, poses a human health threat due to the potential development of bacterial antibiotic resistance. In this study, laboratory experiments were conducted to evaluate the performance of ball milled biochar on the removal of two sulfonamide antibiotics, sulfamethoxazole (SMX) and sulfapyridine (SPY) from water and wastewater. Aqueous batch sorption experiment using both pristine and ball milled biochar derived from bagasse (BG), bamboo (BB) and hickory chips (HC), made at three pyrolysis temperatures (300, 450, 600 °C), showed that ball milling greatly enhanced the SMX and SPY adsorption. The 450 °C ball milled HC biochar and BB biochar exhibited the best removal efficiency for SMX (83.3%) and SPY (89.6%), respectively. A range of functional groups were produced by ball milling, leading to the conclusion that the adsorption of sulfonamides on the biochars was controlled by multiple mechanisms including hydrophobic interaction, π–π interaction, hydrogen bonding, and electrostatic interaction. Due to the importance of electrostatic interaction, SMX and SPY adsorption was pH dependent. In laboratory water solutions, the Langmuir maximum adsorption capacities of SMX and SPY reached 100.3 mg/g and 57.9 mg/g, respectively. When tested in real wastewater solution, the 450 °C ball milled biochar still performed well, especially in the removal of SPY. The maximum adsorption capacities of SMX and SPY in wastewater were 25.7 mg/g and 58.6 mg/g, respectively. Thus, ball milled biochar has great potential for SMX and SPY removal from aqueous solutions including wastewater.

Knowledge of adsorption behavior of organic contaminants on high heat temperature treated biochars is essential for application of biochars as adsorbents in wastewater treatment and soil remediation. In this study, isotherms of 25 aromatic compounds adsorption on biochars pyrolyzed at 700 °C from biomass including wood chips, rice straw, bamboo chips, cellulose, lignin and chitin were investigated to establish correlations between adsorption behavior and physicochemical properties of biochars. Isotherms were well fitted by Polanyi theory-based Dubinin-Ashtakhov (DA) model with three parameters, i.e., adsorption capacity (Q⁰) and adsorption affinity (E and b). Besides the negative correlation of Q⁰ with molecular maximum cross-sectional areas (σ) of organic compounds, positive correlations of Q⁰ with total pore volume (Vₜₒₜₐₗ) and average diameter of micropore (D) of biochars were observed, indicating that adsorption by biochars is captured by the pore-filling mechanism with molecular sieving effect in biochar pores. Linear solvation energy relationships (LSERs) of adsorption affinity (E) with solvatochromic parameters of organic compounds (i. e., αₘ and π∗) were established, suggesting that hydrophobic effect, π-π interaction and hydrogen-bonding interaction are the main forces responsible for adsorption. The regression coefficient (π₁) and intercept (C) of obtained LSERs are correlated with biochar H/C and Rₘᵢcᵣₒ, respectively, implying that biochars with higher aromaticity and more micropores have stronger π-π bonding potential and hydrophobic effect potential with aromatic molecule, respectively. However, hydrogen-bonding potential of biochars for organic molecules is not changed significantly with properties of biochars. A negative correlation of b with biochar H/C is also obtained. These correlations could be used to predict the adsorption behavior of organic compounds on high heat temperature treated biochars from various biomass for the application of biochars as sorbents and for the estimating of environmental risks of organic compounds in the present of biochars.

The Qinling subspecies of giant panda (Ailuropoda melanoleuca qinlingensis), is highly endangered; fewer than 350 individuals still inhabit Qinling Mountains. Previous research revealed captive pandas were exposed to bromine, so we hypothesized that captive pandas were exposed to and affected by polybrominated diphenyl ethers (PBDEs). To test this hypothesis, we tested blood and feces of captive and wild pandas, their drinking water, food (bamboo leaves) from SWARC (Shaanxi Wild Animal Research Center)and FNNR (Foping National Nature Reserve) and supplemental feedstuff given to captive panda at SWARC. We found 13 congeners of PBDEs in fecal samples, of which BDE47, BDE66, BDE71, BDE99, and BDE154 were the dominant, total PBDE concentration in feces of captive pandas was 255% higher than in wild pandas. We found nine PBDEs congeners in blood samples: BDE153 and BDE183 were the predominant congers. PBDEs in blood from captive pandas were significantly higher than in wild pandas. The total concentration of PBDEs were 5473 and 4835 (pg.g) in Fargesia qinlingensis, were 2192 and 1414 (pg.g) in Bashannia fargesii (2192, 1414 pg g), 0.066, 0.038 (pg/ml) in drinking water, and 28.8 (pg.g) in supplemental feedstuff for captive and wild pandas, which indicate that the PBDEs came from its bamboo feed, especially from Bashannia fargesii. Our results demonstrate that BDE99 and BDE47 could be threatening the pandas’ health especially for captive panda and there are potential health risks from PBDEs for pandas. In the short term, this risk may be ameliorated by strict control of food quality. In the long term, however, reducing air, water and soil contamination so as to improve environmental quality can best reduce these risks to meet the international standard such as Stockholm Convention.

The purpose of this study was to investigate antibiotic resistant fungal (ARF) communities in pig manure (PM) composting employing two different biochar (coconut shell-CSB and bamboo biochar-BB) as amendment. Three treatments (Control, 10% CSB and 10% BB) were designed and indicated with T1 to T3. Experimental results declared that the fungal abundance significantly reduced among the both biochar applied treatments but three dominant phyla Ascomycota, Basidiomycota and Mucoromycota were still relatively greater abundance present. There were significant differences (p < 0.05) in the relative abundance and diversity of fungi among all three treatments. Interestingly, biochar addition regulated the overall fungal community in final compost. Compared with the control group, the abundance of fungi was positively mobilized, and especially CSB showed a better effect. Conclusively, biochar has potential to inhibit and reduce the ARGs population and mobility in compost. Thus, these findings offer new insight to understand the succession of ARFs during PM composting.

At present, the simultaneous removal of organic dyes and heavy metals in complex wastewater has raised considerable concern, owing to their striking differences in physicochemical properties. Adsorption, as one of the few removal methods, has attracted extensive attention and gained popularity. Herein, a versatile EDTA and chitosan bi-functionalized magnetic bamboo biochar adsorbent (ECMBB) was synthesized for coinstantaneous adsorption of methyl orange (MO) and heavy metals (Cd(II) and Zn(II)). In this case, the as-synthesized ECMBB composites inherited favorable anionic MO removal performance from bamboo biochar (BB) obtained at 700 °C through electrostatic attraction, hydrogen bonding and π-π interaction, also enhanced the binding of cationic metals by introducing amino groups of chitosan and carboxyl groups of EDTA. In the unitary system, the removal of MO, Cd(II) and Zn(II) by three as-prepared adsorbents can be well illuminated by pseudo-second-order kinetic model and Langmuir isotherm theory. The saturated capture amounts of ECMBB at 25 °C are 305.4 mg g⁻¹ for MO, 63.2 mg g⁻¹ for Cd(II) and 50.8 mg g⁻¹ for Zn(II), which, under the same conditions, are 1.3, 2.6 and 2.5 times those of chitosan-modified magnetic bamboo biochar (CMBB) and 1.9, 6.1 and 5.4 times those of magnetic bamboo biochar (MBB), respectively. Remarkably, in MO-metal binary system, coexisting MO visibly enhanced the adsorption of Cd(II) and Zn(II), while coexisting heavy metals had no significant impact on MO adsorption. Furthermore, ECMBB exhibited no significant loss in adsorption efficiency even after eight adsorption-desorption experiments. This study lays the foundation for fabricating desired integrative biochar adsorbents in the simultaneous purification of organic and metallic pollutants from complex wastewater.

This work reports the use of an iron ore tailings from waste dam as a catalyst and support for carbon nanotubes synthesis and their application in the adsorption of the 17α-ethinylestradiol hormone. The synthesis was carried out by Chemical Vapor Deposition (CVD) in a Fluidized Bed system using: ethylene at temperatures of 500, 600 and 700 °C, and acetonitrile at 500, 600, 700, 800 and 900 °C. The transmission electron microscopy (TEM) results showed that the two higher temperatures in each case favored the formation of nanostructures like carbon nanotubes (CNTs), with good yields. The ethylene source generated classic tubular structures of multiple walls. On the other hand, acetonitrile provided the formation of tubes with less organization, known as bamboo like. This morphology was caused by the insertion of nitrogen into the graphite structure (doping), which originates from the carbon source. The adsorptive capacity of the materials for 17α-Ethinylestradiol removal ranging from 9.2 mg g⁻¹ to 22.3 mg g⁻¹. The kinetic and adsorption isotherm studies were also performed for the systems. As for kinetics, all of them presented pseudo-second order behavior. In relation to the type of isotherm, the systems showed Freundlich behavior, that is, the adsorption occurs in multiple layers. Finally, it was concluded that the use of an iron ore tail as a catalyst in the production of CNTs by CVD is feasible. The materials synthesized still had good adsorptive capacity for an emerging contaminant, thus this study allowed the investigation of two environmental problems.

The silica-composited biochars (SBC) were synthesized by adding silica particulates into bamboo biomass during pyrolysis at 700 °C to examine the effect of silica addition on biochar stabilities and adsorption properties for tetracycline (TC). Silica addition increased the total pore volume and average pore diameter of biochar due to the abundant mesopores in SBC, but decreased specific surface area due to the blockage of biochar pore with silica particles. Biochar stability was obviously enhanced with silica addition due to the decreased atomic ratio of H/C and O/C, the reduced C loss amount after chemical oxidation treatment, and the increased thermal stability. The adsorption capacities of SBC for TC were greatly enhanced with silica addition and increased with the increasing silica addition amount, which can be attributed to the facilitating effect of π–π electron donor acceptor (EDA) interaction and pore-filling effect. In addition, silica addition can also effectively enhance the oxidation resistance of biochar for TC adsorption, since the decreased degree (δ) of TC adsorption amounts on the biochars after chemical oxidation decreased with the increasing silica addition level. The observed positive correlations between δ values and the corresponding C loss amount of biochars after chemical oxidation suggested that the high carbon stability was favorable for the maintenance of biochar adsorption capacity. These results can provide a new way to improve biochar stabilities, aging resistance, and adsorption properties for organic pollutants.

Adsorption of aromatic compounds, including polycyclic aromatic hydrocarbons, nitrobenzenes, phenols, and anilines, on a bamboo biochar produced at 700 °C (Ba700) was investigated with the mechanism discussion by isotherm fitting using the Polanyi-theory based Dubinin–Ashtakhov (DA) model. Correlations of adsorption capacity (Q0) of organic compounds with their molecular sizes and melting points, as well as correlations of adsorption affinity (E) with their solvatochromic parameters (i.e., π* and αm), on the biochar, were developed and indicating that adsorption is captured by the pore filling mechanism and derived from the hydrophobic effects of organic compounds and the forming of π-π electron donor-acceptor (EDA) interactions and hydrogen bonding interactions of organic molecules with surface sites of the biochar. The effects of organic molecular sizes and melting points on adsorption capacity are ascribed to the molecular sieving effect and the packing efficiency of the organic molecules in the biochar pores, respectively. These correlations can be used to quantitatively estimate the adsorption of organic compounds on biochars from their commonly physicochemical properties including solvatochromic parameters, melting points and molecular cross-sectional area. The prediction using these correlations is important for assessing the unknown adsorption behaviors of new organic compounds and also helpful to guide the surface modification of biochars and make targeted selection in the environmental applications of biochars as adsorbents.