If municipal solid waste (MSW) is not properly managed, harmful environmental consequences are imminent. MSW materials are rarely wasted in many affluent countries, but rather are kept in the economic cycle through circular economy models. While in many developing countries, MSW materials are discarded with little to no effort of repairing or recycling. Moving to a circular economy will drastically reduce the amount of waste currently disposed of. This study examines how the Swakopmund Municipality in Namibia’s present municipal solid waste management techniques could be adjusted toward sustainability to reap environmental and socioeconomic benefits from the trash. Source reduction, separation at source, and recycling are some of the most effective strategies in the circular economy models that will help achieve the United Nations (UN) Sustainable Development Goals (SDGs). Swakopmund Municipality should invest in infrastructure, techniques, and programs that are within the circular economy model as an emerging system for sustainability.

Water shortages are an issue of growing worldwide concern. Irrigated agriculture accounts for about 70% of total freshwater withdrawals globally, therefore alternatives to use of conventional sources need to be investigated. This paper critically reviews the application of treated wastewater for agricultural fertigation (i.e., water and nutrient recovery) considering different perspectives: legislation, agronomic characteristics, social acceptability, sustainability of treatment technologies. Critical issues that still need further investigation for a wider application of fertigation practices include accumulation of emerging contaminants in soils, microbiological and public health implications, and stakeholders' acceptance. A techno-economic methodological approach for assessing the sustainability of treated wastewater reuse in agriculture is subsequently proposed herein, which considers different possible local conditions (cultivated crops and effluent characteristics). The results showed that tailoring effluent characteristics to the desired nutrient composition could enhance the process economic sustainability; however, water savings have a major economic impact than fertilizers’ savings, partly due to limited P reuse efficiency. The developed methodology is based on a practical approach and may be generalized to most agricultural conditions, to evaluate and encourage safe and efficient agricultural wastewater reuse practices.

Effective immobilization of industrial waste into biochar development could be one of the most promising technologies for solid waste management to achieve circular economy. In this study, post-industrial cotton textile waste (PICTW), a cellulose rich industrial waste, was subjected to slow pyrolysis to develop a surface engineered biochar through phosphoric acid impregnation. Biochar produced at 500 °C designated as PICTWB500 showed a maximum methylene blue number (240 mg g⁻¹) with remarkable specific surface area of 1498 m² g⁻¹. FESEM, FTIR, XRD and Raman spectra analysis were performed to investigate the surface texture and functionalities developed in the biochar. Adsorption efficiency of the biochar was assessed using drimarene red, blue, violet, and black dyes as model dye pollutants in batch mode at different biochar dose, pH and contact time. The maximum monolayer adsorption capacity was obtained in the range 285–325 mg g⁻¹ for different dyes, determined from Langmuir adsorption model. The kinetic behaviour was more favourable with the pseudo second-order model. The recycling ability of PICTWB500 was proven to be effective up to 6th cycle without compromising its adsorption efficiency significantly. This study demonstrated an excellent adsorption capability of the biochar in dye laden real textile effluent and recycling of spent biochar as a precursor of bio compost. Hence, this study established a dual win strategy for waste utilization in textile industry using a closed loop approach with substantial techno-economic feasibility that may have potential applications.

Urgent and innovative strategies for removal of persistent organic micropollutants (OMPs) in soil, groundwater, and surface water are the need of the hour. OMPs detected in contaminated soils and effluents from wastewater treatment plants (WWTPs) are categorized as environmentally persistent pharmaceutical pollutants (EPPPs), and endocrine disrupting chemicals (EDCs), their admixture could cause serious ecological issues to the non-target species. As complete eradication of OMPs is not possible with the extant conventional WWTPs technology, the inordinate and reckless application of OMPs negatively impacts environmental regenerative and resilience capacity. Therefore, the cardinal focus of this review is the bioremediation of persistent OMPs through efficient application of an agro-waste, i.e. spent mushroom waste (SMW). This innovative, green, long-term strategy embedded in the circular economy, based on state of the art information is comprehensively assessed in this paper. SMW accrues ligninolytic enzymes such as laccase and peroxidase, with efficient mechanism to facilitate biodegradation of recalcitrant organic pollutants. It is vital in this context that future research should address immobilization of such enzymes to overcome quantitative and qualitative issues obstructing their widespread use in biodegradation. Therefore, dual benefit is gained from cultivating critical cash crops like mushrooms to meet the escalating demand for food resources and to aid in biodegradation. Hence, mushroom cultivation has positive environmental, social, and economic implications in developing countries like India.

The area of agricultural wastes valorisation to fertilizers is attracting growing attention because of the increasing fertilizer prices of fertilizers and the higher costs of waste utilization. Despite the scientific and political interest in the concept of circular economy, few studies have considered the practical approach towards the implementation of elaborated technologies. This article outlines innovative strategies for the valorisation of different biobased wastes into fertilizers. The present work makes a significant contribution to the field of new ideas for waste biomass management to recover significant fertilizer nutrients. These results emphasize the importance of the biomass use as a base of renewable resources, which has recently gained special importance, especially in relation to the outbreak of pandemia and war. Broken supply chains and limited access to deposits of raw materials used in fertilizer production (natural gas, potassium salts) meant that now, as never before, it has become more important and feasible to implement the idea of a circular economy and a green deal. We have obtained satisfactory results that demonstrate that appropriate management of biological waste (originating from agriculture, food processing, aquaculture, forest, pharmaceutical industry, and other branches of industry, sewage sludge) will not only reduce environmental nuisance (reducing waste heaps), but will also allow recovery of valuable materials, such as nitrogen (especially valuable amino acids), phosphorus, potassium, microelements, and biologically active substances with properties that stimulate plant growth. The results reported here provide information on production of biobased plant protection products (bioagrochemicals) from agri-food waste. This work reports an overview of biopesticides and biofertilisers production technologies and summarizes their properties and the mechanisms of action.

The interest in tire wear particles (TWPs), generated from abrasion of tires, have gained traction over the past few years, both in regards to quantifying particulate emissions, leaching of different compounds, toxicity, and analytical methods. The life of a tire, from cradle to end-of-life, crosses over different scenarios during its lifetime and transcends environmental compartments and legislative areas, underlining the need for a collective approach. Sustainability for a tire encompasses the use of raw materials, recycling of raw materials, circular economy and material sourcing. The tire industry is currently making significant efforts towards a greener and more sustainable production considering reduction of CO₂-emissions, recycling, material sources and implementing the use of biomass from plants rather than oil-derived alternatives. In this paper, we aim to analyze and discuss the need for environmental regulation of tires in order to provide a series of targeted recommendations for future legislation. Our study shows that the numerous regulations related to tires focus on chemicals, manufacturing, raw materials, use of tires on roads, waste handling, safety and polycyclic aromatic hydrocarbons (PAHs) in different life cycle stages of a tire. However, none directly addresses the contribution of TWPs to the environment. Despite the overall good intentions of the existing regulations, there is a lack of focus on the compounds that partition from the tire and disperse in the environment, their mixture effects, and the transformative products from the parent compounds in the environment. Therefore, a renewed focus is needed on risk assessment of complex mixtures like TWPs. Thus, transparency in regard to use of chemicals in TWP, mixtures, minimization of emissions, and capture of particulate pollution should be a priority.

Plastic production is an essential part of the world economy that has mushroomed exponentially with c.9.2 billion tonnes estimated to have been made between 1950 and 2017. Now, each year c.8–11 million tonnes of plastic waste escapes into the oceans. Plastic usage is varied but the packaging industry accounts for 47%. Recycling and the circular economy are seen as keys to unlocking the plastic problem, for example, via the Extended Producer Responsibility scheme; a Deposit Return Scheme. The circular economy is a fine idea and has been around a long time, but has it made any real difference? The amount of plastic in circulation keeps getting bigger and bigger. More thought must be given to creating technologies and designs that can deal with waste management, integrate international collaboration and cut waste to a bare minimum at its source point upstream. No single solution exists, but there is a need for a legally binding global governance arrangement that would effectively and measurably limit and control plastic pollution. Many governments are in favour of this.

Recreational boating is a leisure and sports activity that has aroused growing interest among users, tourists, and the general public. However, in the last decade, a problem has arisen concerning the abandonment of recreational boats. It is a problem that has become even more acute in times of economic recession. It is, therefore, necessary to find an urgent solution in order to reduce potential environmental risks. This work aims to analyze the state of the question through bibliometrics to know which topics are trending and contrast these findings with a Delphi analysis. The main results focus on the need for greater agility in the court adjudication process and the need for a specific legal framework for the scrapping of recreational craft. In conclusion, it is vital to integrate the circular economy into shipbuilding and scrapping processes to ensure the sustainability of the sector and the environment.

This study explores the implications of plastic waste and recycling management on recyclates for manufacturing clean-energy harvesting devices. The focus is on a comparative analysis of using recycled polyethylene terephthalate (PET) for triboelectric nanogenerator (TENG) production, in two densely populated Asian countries of large economies, namely Singapore and India. Of the total 930,000 tonnes of plastic waste generated in Singapore in 2019, only 4% were recycled and the rest were incinerated. In comparison, India yielded 8.6 million tonnes of plastic waste and 70% were recycled. Both countries have strict recycling goals and have instituted different waste and recycling management regulations. The findings show that the waste policies and legislations, responsibilities and heterogeneity in collection systems and infrastructure of the respective country are the pivotal attributes to successful recycling. Challenges to recycle plastic include segregation, adulterants and macromolecular structure degradation which could influence the recyclate properties and pose challenges for manufacturing products. A model was developed to evaluate the economic value and mechanical potential of PET recyclate. The model predicted a 30% loss of material performance and a 65% loss of economic value after the first recycling cycle. The economic value depreciates to zero with decreasing mechanical performance of plastic after multiple recycling cycles. For understanding how TENG technology could be incorporated into the circular economy, a model has estimated about 20 million and 7300 billion pieces of aerogel mats can be manufactured from the PET bottles disposed in Singapore and India, respectively which were sufficient to produce small-scale TENG devices for all peoples in both countries.

The transition to a circular economy is a key concern for the fashion industry. The emerging second-hand market is a practice that could enable the circular economy in the fashion industry. As this is an emerging trend, the literature has not yet sufficiently explored how it is possible to simultaneously meet consumer and industry expectations in the management of second-hand garments within the value chain. This article aimed to fill that gap with the analytic hierarchy process, which demonstrated that garment collection and recycling are not necessarily best practices for the circular economy. For this to happen, close collaboration between manufacturers and retailers in the value chain is needed to move the industry towards responsibly sustainable production and consumption models. The results emphasise that harvesting management and internal competition on low-cost collection are critical business drivers, while responsible consumption and benefits are opportunities for consumers.