The Mediterranean environment, and most of the Italian peninsula, presents some peculiarities in terms of crop response to O3 since most physiological mechanisms activated upon O3 exposure, such as stomatal closure, often overlap and interact with those that underlie plant adaptation to drought and hyperosmotic stress, which are typical of these environments. OTC and EDU experiments have demonstrated that O3 causes strong yield losses when crops are grown without water limitations. However, exposure to water or saline stress significantly reduced O3 effects on crop yield. In this review, we present the methodological approaches that have been used to study plant-ozone interactions in Italy as well as biochemical, physiological and agronomic responses for representative cropping systems of the Mediterranean climate. Is the 22% yield loss due to ambient ozone in non-limiting water conditions a realistic estimate for moderately stressed crops, typical of most Mediterranean regions?

The phytotoxic risk of ambient air pollution to local vegetation was assessed in Selangor State, Malaysia. The AOT40 value was calculated by means of the continuously monitored daily maximum concentration and the local diurnal pattern of O3. Together with minor risks associated with the levels of NO2 and SO2, the study found that the monthly AOT40 values in these peri-urban sites were consistently over 1.0 ppm·h, which is well in exceedance of the given European critical level. Linking the O3 level to actual agricultural crop production in Selangor State also indicated that the extent of yield losses could have ranged from 1.6 to 5.0% (by weight) in 2000. Despite a number of uncertainties, the study showed a simple but useful methodological framework for phytotoxic risk assessment with a limited data set, which could contribute to appropriate policy discussion and countermeasures in countries under similar conditions. There is a large potential of phytotoxic risk on vegetation in Selangor State, Malaysia.

Drought is considered one of the costliest natural disasters that result in water scarcity and crop damage almost every year. Drought monitoring and forecasting are essential for the efficient management of water resources and sustainability in agriculture. However, the design of a consistent drought prediction model based on the dynamic relationship of the drought index with its antecedent values remains a challenging task. In the present research, the SVR (support vector regression) model was hybridized with two different optimization algorithms namely; Particle Swarm Optimization (PSO) and Harris Hawks Optimization (HHO) for reliable prediction of effective drought index (EDI) 1 month ahead, at different locations of Uttarakhand State of India. The inputs of the models were selected through partial autocorrelation function (PACF) analysis. The output produced by the SVR-HHO and SVR-PSO models was compared with the EDI estimated from observed data using five statistical indicators, i.e., RMSE (Root Mean Square Error), MAE (Mean Absolute Error), COC (Coefficient of Correlation), NSE (Nash-Sutcliffe Efficiency), WI (Willmott Index), and graphical inspection of radar-chart, time-variation plot, box-whisker plot, and Taylor diagram. Appraisal of results indicates that the SVR-HHO model (RMSE = 0.535–0.965, MAE = 0.363–0.622, NSE = 0.558–0.860, COC = 0.760–0.930, and WI = 0.862–0.959) outperformed the SVR-PSO model (RMSE = 0.546–0.967, MAE = 0.372–0.625, NSE = 0.556–0.855, COC = 0.758–0.929, and WI = 0.861-0.956) in predicting EDI. Visual inspection of model performances also showed a better performance of SVR-HHO compared to SVR-PSO in replicating the median, inter-quartile range, spread, and pattern of the EDI estimated from observed rainfall. The results indicate that the hybrid SVR-HHO approach can be utilized for reliable EDI predictions in the study area.

Tannery sludge (TS) contains high levels of organic matter and chemical elements, mainly chromium (Cr). This can increase its toxicity, rendering it unsuitable for application to soil. However, composting has been proposed as an alternative method for detoxifying TS before its addition to soil. Thus, the aim of this study was to evaluate the phytotoxic and cytogenotoxic potential of untreated (TS) and composted (CTS) tannery sludge in solid and solubilized samples. Seed germination and root growth bioassays were performed with Lactuca sativa, while chromosomal aberrations were assessed using the Allium cepa bioassay. In solid samples, the L. sativa bioassay showed that TS adversely affected germination and root growth, while CTS had a negative affect only on root growth. In solubilized samples, only TS showed significant adverse effects on seed germination and root growth. In both solid and solubilized samples, TS and CTS showed cytotoxic, genotoxic, and mutagenic effects on A. cepa. Thus, results demonstrated that the composting of TS does not result in its complete detoxification. For this reason, TS and CTS cannot be recommended for agricultural use, since they may increase the risk of environmental contamination and crop damage.

With a large agricultural sector, China is greatly affected by natural disasters caused by extreme weather events. Because the occurrence of natural disasters is closely related to the sharp increased consumption of energy and the massive emissions of carbon dioxide, this research examines relevant data from 2013 to 2017 in four major regions of China that cover 30 provincial administrative regions. Using the two-stage dynamic DEA model, we evaluate total efficiency value, two-stage efficiency value, and the efficiencies of energy consumption, CO2 emissions, and crop disaster areas, setting CO2 as the link between the production stage (first stage) and the crop damage stage (second stage). The research findings show that overall efficiency in China is generally low, whereby the total efficiencies of eastern and northeastern China are higher than those of central and western China. The efficiency value of the first stage (production stage) is greater than that of the second stage (crop damage stage), and the efficiency of most administrative regions’ second stage is below 0.3, which is the main reason for the country’s low overall efficiency. There is little difference between China’s CO2 and energy consumption efficiency scores, but the efficiency values of crop disaster areas fluctuate greatly. The efficiency scores of various indicators in the eastern region are generally higher and more balanced, and the total efficiency scores exhibit a decreasing trend from east to west. Therefore, it is necessary to implement the environmental policy of controlling energy consumption and early warning of natural disasters in the central and western regions, and promote the R&D industry and technological innovation of carbon dioxide emission reduction and disaster control in the economically developed eastern regions.

We present a synthetic review and expert consultation that assesses the actual risks posed by arthropod pests in four major crops, identifies targets for integrated pest management (IPM) in terms of cultivated land needing pest control and gauges the implementation “readiness” of non-chemical alternatives. Our assessment focuses on the world’s primary target pests for neonicotinoid-based management: western corn rootworm (WCR, Diabrotica virgifera virgifera) in maize; wireworms (Agriotes spp.) in maize and winter wheat; bird cherry-oat aphid (Rhopalosiphum padi) in winter wheat; brown planthopper (BPH, Nilaparvata lugens) in rice; cotton aphid (Aphis gossypii) and silver-leaf whitefly (SLW, Bemisia tabaci) in cotton. First, we queried scientific literature databases and consulted experts from different countries in Europe, North America, and Asia about available IPM tools for each crop-pest system. Next, using an online survey, we quantitatively assessed the economic relevance of target pests by compiling country-level records of crop damage, yield impacts, extent of insecticide usage, and “readiness” status of various pest management alternatives (i.e., research, plot-scale validation, grower-uptake). Biological control received considerable scientific attention, while agronomic strategies (e.g., crop rotation), insurance schemes, decision support systems (DSS), and innovative pesticide application modes were listed as key alternatives. Our study identifies opportunities to advance applied research, IPM technology validation, and grower education to halt or drastically reduce our over-reliance on systemic insecticides globally.

Intensive use of the chlorinated pesticide chlordecone from the 1970s to 1993 to prevent crop damage in banana plantations of Guadeloupe and Martinique led to diffuse pollution of soils and surface waters, affecting both fauna and human beings in the contaminated areas. Since 2001, drinking water production plants have been equipped with filters containing activated carbon that must be treated after saturation. The objective of this work is to produce a hybrid material composed of activated carbon and vitamin B12 (VB12) for the degradation of chlordecone (CLD). The preparation of such a hybrid material is carried out by non-covalent fixation to achieve an eco-friendly solution for the serious environmental problem of contamination by chlorinated pesticides. It is thus proposed to degrade CLD by a physico-chemical treatment allowing salvage of the catalyst, which is adsorbed on the carbon surface to generate less waste that is inexpedient to treat. Activated carbon (AC) is produced locally from available sugarcane bagasse subjected to phosphoric acid activation. The main characteristics of this material are a major mesoporous structure (0.91%) and a specific (BET) surface area ranging from 1000 to 1500 m² g⁻¹. The experimental results showed that BagP1.5 has a high adsorption capacity for VB12 due to its large surface area (1403 m² g⁻¹). The binding of VB12 to the bagasse-derived AC is favoured at high temperatures. The adsorption is optimal at a pH of approximately 6. The maximum adsorption capacity of VB12 on the AC, deduced from the Langmuir model, was 306 mg g⁻¹, confirming the high affinity between the two components. The hybrid material was characterised by FTIR, Raman, X-ray fluorescence spectroscopy and SEM analysis. CLD removal by this hybrid material was faster than that by VB12 or BagP1.5 alone. The CLD degradation products were characterised by mass spectrometry.

Brahmaputra is one of the perennial rivers in India which causes floods every year in the north-east state of Assam causing hindrance to normal life and damage to crops. The availability of temporal Remote Sensing (RS) data helps to study the periodical changes caused by flood event and its eventual effect on natural environment. Integrating RS and GIS methods paved a way for effective flood mapping over a large spatial extent which helps to assess the damage accurately for mitigation. In the present study, multitemporal Sentinel-1A data is exploited to assess the 2017 flood situation of Brahmaputra River in Assam state. Five data sets that are taken during flood season and one reference data taken during the non-monsoon season are used to estimate the area inundated under floods for the quantification of damage assessment. A visual interpretation map is produced using colour segmentation method by estimating the thresholds from histogram analysis. A new method is developed to identify the optimum value for threshold from statistical distribution of Synthetic Aperture Radar (SAR) data that separates flooded water and non-flooded water. From this method, the range of backscatter values for normal water are identified as − 18 to − 30 dB and the range is identified as − 19 to − 24 dB for flooded water. The results showed that the method is able to separate the flooded and non-flooded region on the microwave data set, and the derived flood extent using this method shows the inundated area of 3873.14 Km² on peak flood date for the chosen study area.