细化搜索
结果 1-2 的 2
Utilization of Algal Consortium to Produce Biofuels and Byproducts For Reducing Pollution load
2020
Singh, P. | Srivastava, A. | Srivastava, N. | Sharma, V. | Ghildyal, D. | Upadhyay, A. | Singh, P.
Algal biorefinery process utilizes every component of algal biomass to produce multiple useful fuel products. In this technique, acid pretreatment of algal biomass hydrolyzes microalgal carbohydrates into fermentable sugars, makes lipids more extractable and a protein part accessible for additional products. In the present study, Chlorella sorkiniana produced higher quantity of biodiesel than Botryococcus braunii and biomass in Botryococcus braunii was higher than the Chlorella sorkiniana. Botryococcus braunii produces 11% more lipid content than Chlorella sorkiniana which was consistent with biomass content. The total sugar (oligomeric and monomeric) yield attained by Combined Algal Processing (CAP) was 89.9%. 29 g/L ethanol was produced during the fermentation in the Pretreated Algal Slurry. The recovery of lipids from CAP was reported as 84–89% after fermentation and ethanol removal. CAP preserves the PUFA (Poly-Unsaturated Fatty Acids) and utilizes these high-value PUFAs to further reduce the cost of biofuel production and replace petroleum products.
显示更多 [+] 显示较少 [-]Extractive Treatment of Arsenic Contaminated Clay Soils (Vermiculite)
2022
Abbaslou, Hanie | Ghofran Makshuf, Saeedeh | Bakhtiari, Somayeh | Ghanizadeh, Ali Reza | Shahrashoub, Meysam
In this research, the capability of vermiculite in arsenic extraction, associated with characterizing its main properties was evaluated. To address this purpose, vermiculite was artificially contaminated with arsenic at 7 and 28-day intervals. Then, arsenic was extracted from contaminated soils by different extractants. Various physical and mechanical tests were performed to investigate the effect of arsenic as an anionic contaminant on the properties of the vermiculite, as well as to evaluate how the properties of the contaminated soil were altered by the extraction process. The carbonate bonding phase was probably mainly responsible for the adsorption and fixation of arsenic with more than 50% portion among measured fractions at different curing times. Based on the vermiculite condition, hydrochloric acid was the best extractant for removing arsenic in all studied samples (around 3 -18 % more than other extractants). The clay soil demonstrated few changes due to arsenic contamination and modification. In general, the most promising characteristics of vermiculite as clay liner are its stability after contamination due to high CEC and SSA; however, its workability and strength (UCS between 110 to 220 kPa at different soil conditions) is a challenge and must be improved by adding coarser fractions like silt particles. In general, the results of this study regarding the effects of arsenic contamination and extraction onto vermiculite’s physical properties can provide appropriate information for researchers and geo-environmental engineers.
显示更多 [+] 显示较少 [-]