Lead (Pb) is a non-threshold toxin capable of inducing toxic effects at any blood level but availability of soil screening criteria for assessing potential health risks is limited. The oral bioaccessibility of Pb in 163 soil samples was attributed to sources through solubility estimation and domain identification. Samples were extracted following the Unified BARGE Method. Urban, mineralisation, peat and granite domains accounted for elevated Pb concentrations compared to rural samples. High Pb solubility explained moderate-high gastric (G) bioaccessible fractions throughout the study area. Higher maximum G concentrations were measured in urban (97.6 mg kg−1) and mineralisation (199.8 mg kg−1) domains. Higher average G concentrations occurred in mineralisation (36.4 mg kg−1) and granite (36.0 mg kg−1) domains. Findings suggest diffuse anthropogenic and widespread geogenic contamination could be capable of presenting health risks, having implications for land management decisions in jurisdictions where guidance advises these forms of pollution should not be regarded as contaminated land.

Marine urbanisation often results in the proliferation of artificial coastal defences and heavy sedimentation, adversely impacting coral reef systems in tropical coastal cities. Knowledge of how motile organisms, such as reef fish, respond to novel human-made habitats and high sedimentation is limited. Here, we examine the role of sloping granite seawalls in supporting reef fishes that utilise the epilithic algal matrix (EAM) as a food resource. We surveyed fish assemblages and feeding activities on seawalls and reef flats, and conducted a field experiment to examine the effects of sediment on EAM feeding rates. Seawalls and reef flats supported distinct fish assemblage composition with significantly greater feeding activity on seawalls. However, reduced feeding activity on EAM with elevated sediment loads suggests that urban sedimentation may limit the utility of this novel feeding ground for nearshore communities. These findings illustrate the complexities and interactive effects of anthropogenic changes driven by coastal urbanisation.

Submerged man-made structures present novel habitat for marine organisms and often host communities that differ from those on natural substrates. Although many factors are known to contribute to these differences, few studies have directly examined the influence of substrate material on organism settlement. We quantified larval substrate preferences of two species of ascidians, Ciona intestinalis (cryptogenic, formerly C. intestinalis type B) and Botrylloides violaceus (non-native), on commonly occurring natural (granite) and man-made (concrete, high-density polyethylene, PVC) marine materials in laboratory trials. Larvae exhibited species-specific settlement preferences, but generally settled more often than expected by chance on concrete and HDPE. Variation in settlement between materials may reflect preferences for rougher substrates, or may result from the influence of leached chemicals on ascidian settlement. These findings indicate that an experimental plate material can influence larval behavior and may help us understand how substrate features may contribute to differences in settlement in the field.

Strong differences have been observed between the assemblages on artificial reefs and on natural hard-bottom habitats worldwide, but little is known about the mechanisms that cause contrasting biodiversity patterns. We examined the influence of spatial attributes in relation to both biogenic and topographic microhabitats, in the distribution and composition of intertidal species on both artificial and natural reefs. We found higher small-scale spatial heterogeneity on the natural reef compared with the study breakwater. Species richness and diversity were associated with a higher availability of crevices, rock pools and mussels in natural habitats. Spatial distribution of certain grazers corresponded well with the spatial structure of microhabitats. In contrast, the lack of microhabitats on the breakwater resulted in the absence of several grazers reflected in lower species richness. Biogenic and topographic microhabitats can have interactive effects providing niche opportunities for multiple species, explaining differences in species diversity between artificial versus natural reefs.

The study proposes a novel and sustainable method to appropriately utilize wastes from granite as well as glass industries in brick manufacturing. An ecofriendly and low-cost manufacturing process of ash-based bricks pertaining to the Indian standard codal provisions that can be adopted on the commercial scale is deliberated. The research also recommends the method for predicting the strength of the ash-based bricks using machine learning algorithms like random forests and decision trees. For positive synergy in the performance, both the granite tailings and glass waste must be used together. Using the granite tailings and glass waste together led to a significant reduction of 75% in the fly ash requirement without compromising the brick’s performance. The addition of the granite tailings and glass waste in the mix could increase the strength of the brick by 90.5% and 37.7%, respectively. Beyond 30% dosage of granite, tailings are not recommended as they may lead to the poor gradation of particles and weak bonding in the microstructure. The glass waste in the mixture should not be more than 15% as it causes the dilution of pozzolanic reactions thereby forming fewer hydrated compounds. Brick’s durability is known after exposing the specimens for 1 year to sewers and biogenic corrosion environment, marine environment, and saline soil environment, respectively. The inclusion of the industrial wastes significantly reduced the specimen damage in the extreme environmental conditions along with the least absorption rates. The dosage of ash, granite tailings, and glass waste has to be maintained around 15%, 30%, and 15%, respectively for attaining the optimum performance. Out of the generated machine learning algorithms, only random forests could be able to predict the values accurately with R² values at 0.90 and with comparatively lesser errors.

In tropical countries like Colombia, a large variety of available aquatic plants have yet to be investigated for phytodepuration processes. The aim of this study was to assess the effect of Cyper-us ligularis and Echinocloa colona¸ two local plants of Colombian Caribbean region, on removal of dissolved organic matter (COD) and nutrients (N-NH₄⁺, N-NO₃⁻ and P-PO₄⁻³) from domestic wastewater. Experiments were conducted in replicate pilot-scale Horizontal Subsurface Flow Constructed Wetlands (HSSF CWs) (0.66 m²). Four wetland treatment units were installed in parallel. Two were planted with C. ligularis and the other two remained with E. colona. The experimental system was connected to a 0.76-m³ primary sedimentation tank that fed experimental wetland treatment units. Wetlands were filled with granite gravel (~8 mm and 0.4 of porosity). During a period of 4 months, each treatment unit received a continuous loading at the rate of 42 L day⁻¹ and a hydraulic retention time of 2.3 days approximately. Wastewater samples from influent and effluents were collected three times each week in order to monitor temporal/spatial changes in removals efficiencies of COD, N-NH₄⁺, N-NO₃⁻, and P-PO₄⁻³. Results showed that removals of COD, N-NH₄⁺, and N-NO₃⁻ were not significantly different between treatments (p > 0.05). Nevertheless, P-PO₄⁻³ removal for E. colona was significantly higher than C. ligularis (p < 0.05), showing that this plant can assimilate important amounts of P. Further investigations must be conducted to evaluate the potential of native aquatic macrophytes for phytodepuration.

The exploitation of volcanic rock quarries generates enormous waste, which causes the problem of disposal, leading to rising dust levels in quarries and depositions on nearby farms by runoffs. To address this issue, the development of sustainable solution for their valorization in construction industries is required. The present investigation aims to valorize granite (GW) and basalt (BW) quarry waste powders as partial replacement (up to 20 wt.%) of iron-rich aluminosilicates in the synthesis of geopolymer binders. Both synthesized series of samples were sealed and cured at 7, 14, and 28 days at room temperature before subjecting to various analytical techniques, including the mechanical properties, XRD, FT-IR, TG/DTG, and SEM–EDS. The results showed that both GW and BW powders are efficient to produce sufficient amounts of geopolymer binder, with ensure good cohesion and connectivity between different components within the final matrices. The values of compressive strength were 7.5–35.9 MPa and 6.2–39.7 MPa for laterite/granite and laterite/basalt geopolymer composites, denoted LGA and LBA, respectively. Moreover, the coexistence of the amorphous Na-aluminosilicate, Ca-aluminosilicate, and Na-polyferrosialate species is responsible for the mechanical properties development of the end-products. Based on the findings, the selected quarry wastes appeared to be sustainable and cost-effective materials for the synthesis of low-energy consumption binder, suitable for the production of construction materials.

Radiometric measurement of building materials is very important to assess the internal and external exposure caused by the ionizing radiation emitted from terrestrial radionuclides in building materials. The activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K in fifty-eight samples of fifteen different structural and covering building materials commonly used in Osmaniye province located in the Mediterranean region of Turkey were measured by using gamma-ray spectroscopy. The activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K varied from 2.5 ± 0.1 (marble) to 145.7 ± 4.4 (clay brick), 1.3 ± 0.1 (marble) to 154.3 ± 4.1 (marble), and 8.6 ± 0.2 (sand) to 1044.1 ± 70.3 (granite), respectively. Radiological parameters (activity concentration index, alpha index, indoor absorbed gamma dose rate and the corresponding annual effective dose rate, and excess lifetime cancer risk) were estimated to evaluate the health hazards associated with these building materials. Since the estimated values of these parameters are within the recommended safety limits or criteria values, the use of the studied building materials in the construction of dwellings can be considered to be safe for the residents of the region.

One of the aims of Goal 11 of the UN’s 2030 Agenda for Sustainable Development is to make human settlements sustainable. Some effort should therefore focus on developing maintenance strategies for buildings. Polished granite cladding tiles are very popular for use as flooring material in private and public buildings. These tiles are often treated by mechanical cleaning with detergents and scrubbers, and anionic detergents without chelating agents are usually used to prevent damaging the material. In this study, the anionic detergent Teepol® was applied to granite tiles in order to determine the effect of the treatment on the surface properties of this stone, i.e. appearance, colour, gloss, roughness and hydrophobicity. The results obtained were explained by scanning electron microscopy observations, which enabled characterisation of the microtexture of the surfaces, chemical contamination and any damage to the different granite-forming minerals. The results were compared with those obtained for tiles cleaned by the same mechanical procedure but with tap water in place of detergent and for tiles treated by immersion in water without any mechanical action. In summary, the properties evaluated were affected by the extraction of the typical oxyhydroxylated iron forms that fill cracks in the granite and by the formation of new cracks due to the mechanical action. Moreover, colour changes and the chemical contamination (C-rich deposits with Na, S, Cl, Ca and Mg) hindered the effectiveness of the cleaning procedure.