We investigated microplastic pollution in 9 commercial bivalves from a fishery market in China. Multiple types of microplastics, including fibers, fragments and pellets, occurred in the tissue of all bivalves. The number of total microplastics varied from 2.1 to 10.5 items/g and from 4.3 to 57.2 items/individual for bivalves. Scapharca subcrenata contained on average 10.5 items/g and exhibited the highest levels of microplastics by weight. Fibers were the most common microplastics and consisted of more than half of the total microplastics in each of the 8 species. In Alectryonella plicatula, pellets accounted for 60% of the total microplastics. The most common size class was less than 250 μm and accounted for 33–84% of the total microplastics calculated by species. Our results suggest that microplastic pollution was widespread and exhibited a relatively high level in commercial bivalves from China. More intensive investigations on microplastics should be conducted in seafood.

Copper (Cu) is an essential biocide for wood protection, but fails to protect wood against Cu-tolerant wood-destroying fungi. Recently Cu particles (size range: 1 nm–25 μm) were introduced to the wood preservation market. The new generation of preservatives with Cu-based nanoparticles (Cu-based NPs) is reputedly more efficient against wood-destroying fungi than conventional formulations. Therefore, it has the potential to become one of the largest end uses for wood products worldwide. However, during decomposition of treated wood Cu-based NPs and/or their derivate may accumulate in the mycelium of Cu-tolerant fungi and end up in their spores that are dispersed into the environment. Inhaled Cu-loaded spores can cause harm and could become a potential risk for human health. We collected evidence and discuss the implications of the release of Cu-based NPs by wood-destroying fungi and highlight the exposure pathways and subsequent magnitude of health impact.

Atmospheric particle size distribution of polycyclic aromatic hydrocarbons (PAHs) in a typical e-waste recycling zone and an urban site (Guangzhou) in southern China featured a unimodal peak in 0.56–1.8 μm for 4–6 ring PAHs but no obvious peak for 2–3 ring PAHs at both sites. The atmospheric deposition fluxes of PAHs were estimated at 5.4 ± 2.3 μg m−2 d−1 in the e-waste recycling zone and 3.1 ± 0.6 μg m−2 d−1 in Guangzhou. In addition, dry and wet deposition fluxes of PAHs were dominated by coarse (Dp > 1.8 μm) and fine particles (Dp < 1.8 μm), respectively. Fine particles predominated the deposition of PAHs in the lung. The results estimated by incremental inhalation cancer risk suggested that particle-bound PAHs posed serious threat to human health within the e-waste recycling zone and Guangzhou.

PCDD/Fs and PCBs are environmentally persistent substances that have been associated with adverse effects on human health. Contamination of soils, animal feed and pastures leads to their bioaccumulation of in food products of animal origin, which are considered the major source of intake of these contaminants in humans. We analyzed eggs from free-range hens, sampled from small farms, located within a distance of 4.5 km from a secondary aluminum smelter in Northern Italy. The concentrations of PCDD/Fs, DL-PCBs and NDL-PCBs were higher in eggs from locations close to the plant, and strongly exceeded the limits set by EU Regulation 1259/2011 (2.5 pg WHO TEQ fat g−1 for PCDD/Fs, 5.0 pg WHO TEQ g−1 for PCDD/Fs and DL-PCBs L, 40 ng g−1 for NDL-PCBs). Consuming contaminated eggs may pose a risk for human health, especially for children (≤9 years) and infants (≤3 years), due to the 2-fold excess of the current exposure limits.

Heavy metals in urban soils can compromise human health, especially in urban gardens, where gardeners may ingest contaminated dust or crops. To identify patterns of urban garden metal contamination, we measured concentrations and bioavailability of Pb, As, and Cd in soils associated with twelve community gardens in Los Angeles County, CA. This included sequential extractions to partition metals among exchangeable, reducible, organic, or residual fractions. Proximity to road increased all metal concentrations, suggesting vehicle emissions sources. Reducible Pb increased with neighborhood age, suggesting leaded paint as a likely pollutant source. Exchangeable Cd and As both increased with road proximity. Only cultivated soils showed an increase in exchangeable As with road proximity, potentially due to reducing humic acid interactions while Cd bioavailability was mitigated by organic matter. Understanding the geochemical phases and metal bioavailability allows incorporation of contamination patterns into urban planning.

Polycyclic aromatic hydrocarbons (PAHs) can cause adverse effects on human health. The relative contributions of their two major intake routes (diet and inhalation) to population PAH exposure are still unclear. We modeled the contributions of diet and inhalation to the overall PAH exposure of the population of Beijing in China, and assessed their human incremental lifetime cancer risks (ILCR) using a Mont Carlo simulation approach. The results showed that diet accounted for about 85% of low-molecular-weight PAH (L-PAH) exposure, while inhalation accounted for approximately 57% of high-molecular-weight PAH (H-PAH) exposure of the Beijing population. Meat and cereals were the main contributors to dietary PAH exposure. Both gaseous- and particulate-phase PAHs contributed to L-PAH exposure through inhalation, whereas exposure to H-PAHs was mostly from the particulate-phase. To reduce the cancer incidence of the Beijing population, more attention should be given to inhaled particulate-phase PAHs with considerable carcinogenic potential.

Diesel particulate matter (DPM) is associated with adverse human health effects. This study aims to investigate the relationship between DPM exposure and emissions by estimating the individual intake fraction (iFi) and population intake fraction (iFp) of DPM. Daily average concentrations of particulate matter at two bus stops during rush hours were measured, and then they were apportioned to DPM due to heavy-duty diesel bus emissions using Chemical Mass Balance Model. The DPM emissions of diesel buses for different driving conditions (idling, creeping and traveling) were estimated on the basis of field observations and published emission factors. The median iFi of DPM was 0.67 and 1.39 per million for commuters standing at the bus stop and pedestrians/cyclists passing through the bus stop during rush hours, respectively. The median iFp of DPM was 94 per million. Estimations of iFi and iFp of DPM are potentially significant for exposure assessment and risk management.

The recent coal ash spill on the Dan River in North Carolina, USA has caused several negative effects on the environment and the public. In this analysis, I report a monetized value for these effects after the first 6 months following the spill. The combined cost of ecological damage, recreational impacts, effects on human health and consumptive use, and esthetic value losses totals $295,485,000. Because the environmental impact and associated economic costs of riverine coal ash spills can be long-term, on the order of years or even decades, this 6-month assessment should be viewed as a short-term preview. The total cumulative damage cost from the Dan River coal ash spill could go much higher.

Manufacture of lead-acid batteries is of widespread interest because of its emissions of heavy metals and metalloids into environment, harming environmental quality and consequently causing detrimental effects on human health. In this study, exposure pathways and health risks of children to heavy metal(loid)s (Pb, Cd, As, etc) were investigated based on field sampling and questionnaire. Pb was one of the most abundant elements in children's blood, with an elevated blood lead level of 12.45 μg dL−1. Soil/dust and food were heavily polluted by targeted metal(loid)s. Food ingestion accounted for more than 80% of the total exposure for most metal(loid)s. The non-cancer risks to children were 3–10 times higher than the acceptable level of 1, while the cancer risks were 5–200 times higher than the maximum acceptable level of 1.0 × 10−4. The study emphasized the significance of effective environmental management, particularly to ensure food security near battery facilities.