细化搜索
结果 1-10 的 41
Generation of novel n-p-n (CeO2-PPy-ZnO) heterojunction for photocatalytic degradation of micro-organic pollutants
2022
Rajendran, Saravanan | Hoang, Tuan K.A. | Trudeau, Michel L. | Jalil, A.A. | Naushad, Mu | Awual, Md Rabiul
Recently, hetero junction materials (p-n-p and n-p-n) have been developed for uplifting the visible light activity to destroy the harmful pollutants in wastewater. This manuscript presents a vivid description of novel n-p-n junction materials namely CeO₂-PPy-ZnO. This novel n-p-n junction was applied as the photocatalyst in drifting the mobility of charge carriers and hence obtaining the better photocatalytic activity when compared with p-n and pure system. Such catalyst's syntheses were successful via the copolymerization method. The structural, morphological and optical characterization techniques were applied to identify the physio-chemical properties of the prepared materials. Additionally, the superior performance of this n-p-n nanostructured material was demonstrated in the destruction of micro organic (chlorophenol) toxic wastes under visible light. The accomplished ability of the prepared catalysts (up to 92% degradation of chlorophenol after 180 min of irradiation) and their profound degradation mechanism was explained in detail.
显示更多 [+] 显示较少 [-]Visible-light driven dual heterojunction formed between g-C3N4/BiOCl@MXene-Ti3C2 for the effective degradation of tetracycline
2022
Sharma, Gaurav | Kumar, Amit | Sharma, Shweta | Naushad, Mu | N. Vo, Dai-Viet | Ubaidullah, Mohd | Shaheen, Sabry M. | Stadler, Florian J.
In the present study, we have successfully formulated a dual heterojunction of g-C₃N₄/BiOCl@MXene-Ti₃C₂ (GCBM) which was found to be highly active in the visible region. GCBM was found to be highly efficient for the degradation of an antibiotic, tetracycline (TC) as compared to the individual constituting units; g-C₃N₄ and BiOCl. Maximum of 97% TC degradation rate was obtained within 90 min of visible light irradiation for initial concentration of 10 mg/L of TC. Optical analysis exhibited that the synthesized heterojunction showed high absorption in the complete spectrum. The reactive species specified by the scavenger study showed the major involvement of •O₂⁻ and •OH radicals. The charge transfer mechanism showed that 2 schemes were majorly involvement in which Z-scheme was formed between g-C₃N₄ and BiOCl and Schottky junction was formed between g-C₃N₄ and Mxene-Ti₃C₂. The formation of Schottky junction helped in inhibiting the back transfer of photogenerated charges and thus, helped in reducing the recombination rate. The synthesized photocatalyst was found to be highly reusable and was studied for consecutive 5 cycles that generalized the high proficiency even after repetitive cycles.
显示更多 [+] 显示较少 [-]Tetracycline removal enhancement with Fe-saturated nanoporous montmorillonite in a tripartite adsorption/desorption/photo-Fenton degradation process
2022
Chahardahmasoumi, Shiva | Jalali, Seyed Amir Hossein | Sarvi, Mehdi Nasiri
The adsorption and photo-Fenton degradation of tetracycline (TC) over Fe-saturated nanoporous montmorillonite was analyzed. The synthesized samples were characterized using XRD, FTIR, SEM, and XRF analysis, and the adsorption and desorption of TC onto these samples, as well as the antimicrobial activity of TC during these processes, were analyzed at different pH. Initially, a set of adsorption/desorption experiments was conducted, and surprisingly, up to 50% of TC adsorbed was released from Mt structure. Moreover, the desorbed TC had strong antibacterial activity. Then, an acid treatment (for the creation of nanoporous layers) and Fe saturation of the montmorillonite were applied to improve its adsorption and photocatalytic degradation properties over TC. Surprisingly, the desorption of TC from modified montmorillonite was still high up to 40% of adsorbed TC. However, simultaneous adsorption and photodegradation of TC were detected and almost no antimicrobial activity was detected after 180 min of visible light irradiation, which could be due to the photo-Fenton degradation of TC on the modified montmorillonite surface. In the porous structures of modified montmorillonite high, ˙OH radicals were created in the photo-Fenton reaction and were measured using the Coumarin technique. The ˙OH radicals help the degradation of TC as proposed in an oxidation process. Surprisingly, more than 90% of antimicrobial activity of the TC decreased under visible light (after 180 min) when desorbed from nanoporous Fe-saturated montmorillonite compared to natural montmorillonite. To the best of our knowledge, this is the first time that such a high TC desorption rate from an adsorbent with the least residual antimicrobial activity is reported which makes nanoporous Fe-saturated montmorillonite a perfect separation substance of TC from the environment.
显示更多 [+] 显示较少 [-]Highly efficient photocatalytic oxidation of antibiotic ciprofloxacin using TiO2@g-C3N4@biochar composite
2022
Wang, Guanghui | Li, Yingjie | Dai, Jialing | Deng, Nansheng
In this present study, a novel indirect Z-scheme TiO₂@g-C₃N₄@biochar (TiO₂@g-C₃N₄@BC) composite photocatalyst was successfully fabricated and characterized with SEM, TEM, EDS, XRD, FTIR, PL, XPS, and UV–vis DRS. The photocatalytic degradation behavior of ciprofloxacin (CIP) on the TiO₂@g-C₃N₄@BC was evaluated under UV–vis and visible light irradiation, and the possible reaction mechanism of photocatalytic oxidation of CIP on the TiO₂@g-C₃N₄@BC was explained. The TiO₂@g-C₃N₄@BC composite photocatalyst exhibited stronger photocatalytic oxidation activity for CIP in comparison with TiO₂, g-C₃N₄, TiO₂@BC, and TiO₂@g-C₃N₄. After 60 min of UV–vis and visible light irradiation, the photocatalytic removal efficiency of CIP by TiO₂@g-C₃N₄@BC was 99.3 and 89.2%, respectively. The photocatalytic removal performance of CIP was affected by the initial concentration of CIP, catalyst dosage, and pH value. The composite photocatalyst presented excellent stability and reusability after five cycles. An indirect Z-scheme principle of the CIP photocatalytic oxidation reaction on TiO₂@g-C₃N₄@BC was clearly proposed, and the whole process of photocatalytic degradation was the results of the interaction between CIP and reactive active species (·O₂⁻, h⁺, and ·OH), of which ·O₂⁻ is the main active substance. Four CIP degradation pathways were proposed. This work may provide an effective strategy to remove antibiotics in wastewater.
显示更多 [+] 显示较少 [-]Multifunctional and smart Er2O3–ZnO nanocomposites for electronic ceramic varistors and visible light degradation of wastewater treatment
2022
AlAbdulaal, Thekrayat | AlShadidi, Manal | Hussien, Mai | Ganesh, Vanga | Bouzidi, Abdel-Fatah | Rafique, Saqib | Algarni, Hamed | Zahran, Heba | ʻAbd al-Wahhāb, Muḥammad | Yahia, Ibrahim
In this proposed study, erbium (Er³⁺)-doped ZnO nanocomposites were prepared through the effective, basic, and green combustion method. The significant effects of Er dopants on the structural, morphological features, dielectric, and optical behaviors of the pure ZnO matrix as well as Er₂O₃–ZnO nanostructured materials were investigated applying X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transformation infrared (FT-IR) spectroscopy, and UV–Vis spectrophotometer techniques. These results showed that the synthesized Er₂O₃–ZnO nanocomposites are well polycrystalline. The Er₂O₃–ZnO nanocomposites are almost uniformly distributed on the surface morphologies. Furthermore, UV–Vis diffuse reflectance spectroscopy, AC electrical conductivity, and dielectric properties’ current–voltage characteristics were utilized to examine the influence of erbium doping on the optical properties, energy bandgaps of the proposed Er₂O₃–ZnO nanostructured powder. The tested nano-samples were applied for the visible light photodegradation of p-chlorophenol(4-CP) and p-nitrophenol (4-NP). The Er-doped ZnO ratio affects the photocatalytic activity of the ZnO matrix. This current research substantiated that more than 99.5% of 4-CP and 4-NP were photodegraded through 30 min of irradiation. Four times, the Er:ZnO nanocatalysts were used and still displayed an efficiency of more than 96.5% for 4-CP and 4-NP degradations in the specified period of 30 min. The as-prepared Er₂O₃–ZnO nanostructures are considered novel potential candidates in broad nano-applications from visible photocatalytic degradation of waste pollutants to the electronic varistor devices.
显示更多 [+] 显示较少 [-]Surface conjugation of titanium dioxide nanoparticles on nano-graphene oxide enhances photocatalytic degradation of azo dyes under sunlight
2022
Das, Sohel | Singh, Vineeta | Paul, Subhankar
Here, conjugate of nano-graphene oxide (GO) and titanium dioxide nanoparticle (nTiO₂) was proposed for the photocatalytic degradation of two toxic azo dyes, Congo red (CR) and Methylene blue (MB), under sunlight irradiation. Furthermore, the optimized weight ratio between GO and nTiO₂ of 1:5 demonstrated the highest degradation efficiency. The nanoconjugate induced 85% degradation of 40 ppm of CR in 60 min and a complete degradation within 70 min, while it degraded more than 90% of 20 ppm of MB in 80 min. The photocatalyst can be reused for five cycles of photocatalysis. Thus, the photocatalytic potential of GO/nTiO₂ under visible light may be used as a very suitable and cost-effective photocatalyst industrially for the removal of toxic dyes from water.
显示更多 [+] 显示较少 [-]The impact of optical liquid filters on PV panel performance
2022
Hamdan, Mohammad | Abdelhafez, Eman
The goal of this research is to investigate the effect of utilizing selective liquids as absorption filters to prevent PV module overheating by blocking the undesirable part of the spectrum (long wavelength) while allowing the beneficial part of the spectrum (visible light and near infrared) to pass through. The fluids were evaluated on two different panels, and their results were compared to those of a control panel. In this work, two liquids were used and tested: copper sulfate solution (CuSO₄·5H₂O) and distilled water as absorption filter; each was arranged in such a way that it flows evenly over the surface of a PV module through a cavity mounted on the top side of the PV module. In addition, a standard PV panel was employed as a comparison. The average power produced by the PV when pure was used as an optical filter is 31.3%, while it was 11.3% when copper sulfate solution was used compared with base unit. Furthermore, the cooling effect of pure water on the PV was more efficient than that of copper sulfate solution, with an average PV temperature drop of 15% compared with 7.5% when copper sulfate is used compared with the base unit panel’s performance improved by an average of 31.3% when distilled water was used as the absorption filter, compared to the reference panel’s performance, while the copper sulfate solution improved the panel’s performance by an average of 11.3% compared to the reference panel’s performance.
显示更多 [+] 显示较少 [-]Construction of nitrogen vacant g-C3N4 nanosheet supported Ag3PO4 nanoparticle Z-scheme photocatalyst for improved visible-light photocatalytic activity
2022
Zhang, Xiuxiu | Yi, Guiyun | Li, Peng | Zheng, Xiaomeng | Shen, Xuhang | Ning, Kunlei | Chen, Lunjian | Zhang, Chuanxiang | Zhang, Yulong | Sun, Qi
The superior photocatalytic activity of semiconductor-based photocatalytic materials has attracted great attention. In this work, a series of novel Ag₃PO₄/g-C₃N₄₋ₓ (APO/CNx) composites with the Z-scheme structure were fabricated through a facile precipitation method. B naphthol, a typical phenolic compound, was selected to evaluate the photocatalytic activity of all as-prepared photocatalysts. The obtained APO/CNx composites exhibited excellent photocatalytic activity for degradation of B naphthol under visible-light irradiation. Experimental results showed that the degradation rate toward B naphthol could reach to 90.5% for 180 min, which was almost 3.66 times higher than pure g-C₃N₄, indicating that the presence of nitrogen vacancies and Z-scheme structure could efficiently improve the photocatalytic performance of pure g-C₃N₄. Furthermore, the results of trapping experiments and electron spin resonance (ESR) spectroscopy manifest that •O₂⁻ and •OH radicals were the predominant active substances for B naphthol degradation, and the possible mechanism of improved photocatalytic performance was elucidated. This work will provide an innovative perspective for constructing Z-scheme photocatalysts for the application of photocatalytic in the field of wastewater treatment.
显示更多 [+] 显示较少 [-]A RGO aerogel/TiO2/MoS2 composite photocatalyst for the removal of organic dyes by the cooperative action of adsorption and photocatalysis
2022
Zhang, Yujuan | Qi, Haojie | Zhang, Liang | Wang, Yao | Zhong, Lvling | Zheng, Yage | Wen, Xin | Zhang, Xiaomin | Xue, Juanqin
A composite consisting of reduced graphene oxide aerogel/titanium dioxide/molybdenum disulfide (abbreviated as RGO aerogel/TiO₂/MoS₂) was developed for the removal of organic dyes from solution cooperatively by adsorption and photocatalytic degradation mechanisms. The composite was successfully synthesized by stepwise layered assembly integration, including sol-gel and physical vapor deposition (PVD) methods. The resulting multi-component composite material featured a high specific surface area (255.441 m²/g) containing a myriad of negatively charged carboxylate functional groups on the surface of the composite, which enabled the composite material to demonstrate a high removal efficiency of cationic dyes, such as rhodamine B, from solution. In addition, the composite featured optimal optical and photocatalytic properties for facilitating efficient photodegradation of the dye molecules, including a large absorbance in the visible light region and a fast transfer of photogenerated electron-hole pairs. Moreover, electron paramagnetic resonance (EPR) analysis and reactive oxygen species scavenging experiments confirmed that superoxide radicals (O₂•–), holes (h⁺), and hydroxyl radicals (•OH) were involved in photocatalytic degradation of the organic dyes.
显示更多 [+] 显示较少 [-]Enhanced photocatalytic activity and charge carrier separation of CNT/TiO2/WO3/CdS catalyst for the visible-light photodegradation of reactive blue 19
2022
Bagheri, Marzieh | Vesali-Naseh, Masoud | Farhadian, Mehrdad
The novel quaternary CNT/TiO₂/WO₃/CdS nanostructure was fabricated to be employed in the photocatalytic degradation of reactive blue 19 (RB19) under the visible light irradiation. The physicochemical properties of the pure TiO₂, CNT/TiO₂, CNT/TiO₂/WO₃, and CNT/TiO₂/WO₃/CdS were characterized using XRD, FTIR, FESEM, EDX, DRS, PL, and BET analyses. The photodegradation results showed that the optimum weight percentage of CNT, WO₃, and CdS was 4%, 35%, and 5%, respectively. The highest RB19 degradation efficiency of CNT/TiO₂/WO₃/CdS was achieved 97%. Besides, the central composite design was applied to model and optimize the photocatalytic activity of CNT/TiO₂/WO₃/CdS nanocatalyst and assess the effects of processing variables including RB19 concentration, catalyst concentration, pH, and irradiation time on the response. RB19 concentration and pH had the most and the second most significant role in the removal efficiency. While increasing the catalyst concentration and irradiation time positively enhanced the removal efficiency to more than 82%, increasing the pH and dye concentration showed the remarkable hindering effects on the removal efficiency by about 45% reduction. The reusability of the synthesized catalysts was studied under the optimum conditions as follows: [RB19] = 25 mg/L, [catalyst] = 1 g/L, pH of 4, and irradiation time = 2 h. The COD and TOC analyses were also conducted during photodegradation process. The COD and TOC removal efficiencies were achieved about 67% and 62%, respectively.
显示更多 [+] 显示较少 [-]