This paper describes a study that was aimed at optimizing the pelletization of fecal sludge-based fertilizers for agricultural use. The process developed is easy to implement and increases the marketability of the products while also addressing a serious health and environmental challenge. The study took place during the period 2011-2012 in Ghana. The fecal sludge, rich in nutrients and organic matter, was dried and used to produce five different fertilizers (i.e., four formulations of compost and one with gamma irradiated material). Each material was then pelletized using locally constructed machinery. Key operating parameters, such as moisture content (10-55% in mass), binder type (clay or starch) and concentration (0-10% in mass), were varied and their impacts on the characteristics of pellets (e.g., amount of fine materials generated, length distribution or stability of pellets, and pellet disintegration rate) were also followed. Given the low analyzing capabilities of developing countries, some simple analytical methods were developed and used to compare pellets produced under different conditions. The results confirmed that the addition of 3% of pregelatinized starch is recommended during pelletization of fecal sludge-based fertilizers. Applicable moisture contents were also identified per fertilizer type, and were found to comprise between 21 and 43%.

This paper describes a study that was aimed at optimizing the pelletization of fecal sludge-based fertilizers for agricultural use. The process developed is easy to implement and increases the marketability of the products while also addressing a serious health and environmental challenge. The study took place during the period 2011-2012 in Ghana. The fecal sludge, rich in nutrients and organic matter, was dried and used to produce five different fertilizers (i.e., four formulations of compost and one with gamma irradiated material). Each material was then pelletized using locally constructed machinery. Key operating parameters, such as moisture content (10-55% in mass), binder type (clay or starch) and concentration (0-10% in mass), were varied and their impacts on the characteristics of pellets (e.g., amount of fine materials generated, length distribution or stability of pellets, and pellet disintegration rate) were also followed. Given the low analyzing capabilities of developing countries, some simple analytical methods were developed and used to compare pellets produced under different conditions. The results confirmed that the addition of 3% of pregelatinized starch is recommended during pelletization of fecal sludge-based fertilizers. Applicable moisture contents were also identified per fertilizer type, and were found to comprise between 21 and 43%.

Hospital waste is a burning issue that severely impacts public health. This study in three big hospitals in Lahan and Rajbiraj, Nepal, for one year (2019 March-2020 February) aims to analyze some parameters that directly help waste management properly. Field study, questionnaire, and interview methods were followed. The average moisture content of wastes of all three hospitals was 55.79%. There was no variance in the three hospitals’ moisture content values of wastes (F = 1.89 P-value = 0.165 F crit = 3.284917651). The average temperature of dumped waste was 23.23°C, and the temperature of all three hospitals was closely associated (F = 0.998, P-value 0.379, Fcrit = 3.28). The average pH value of wastes from the three hospitals was 4.44, and it from all three sites was strongly associated (F = 0.0668, P-value 0.935, Fcrit = 3.284). There was no relation between income and types of waste production (ꭕ2 = 0.8, df = 4, significance level = 0.05), but there was a high association between the level of income and amount of waste production. There was a high association between the nature of hospitals and types and the amount of waste (ꭕ2 = 77.09, df = 4, Significance level = 0.05). In Sagarmatha Choudhary eye hospital Lahan, there was no significant correlation between the number of patients and the amount of waste (Correlation = -0.187889 at 0.05% significance level). Unique Hospital Rajbiraj showed a correlation between the number of patients and the amount of waste (correlation = 0.1183 at 0.05% significance level). In Gajendra Narayan Singh Hospital, there was a correlation between the number of patients and the amount of waste (Correlation = 0.3453, at 0.05% significance level). There was no association between the qualification of respondents and their responsibilities regarding the services provided by hospitals (ꭕ2 = 1.43, df = 6, Significance level = 0.05). It is recommended for better management and installment of modern technologies for waste management.