Continuous operational monitoring by means of remote sensing contributes significantly towards less occurrence of oil spills over European waters however, operational activities show regular occurrence of accidental and deliberate oil spills over the North Sea, particularly from offshore platform installations. Since the areas covered by oil spills are usually large and scattered over the North Sea, satellite remote sensing particularly Synthetic Aperture Radar (SAR) represents an effective tool for operational oil spill detection. This paper describes the development of a semi-automated approach for oil spill detection, optimized for near real time offshore platform sourced pollution monitoring context. Eight feature parameters are extracted from each segmented dark spot. The classification algorithm is based on artificial neural network. An initial evaluation of this methodology has been carried out on 156 TerraSAR-X images. Wind and current history information also have been analyzed for particular cases in order to evaluate their influences on spill trajectory.

Little attention is given to applying the artificial neural network (ANN) modeling technique to understand site–specific air pollution dispersion mechanisms, the order of importance of meteorological variables in determining concentrations as well as the important time scales that influence emission patterns. In this paper, we propose a methodology for extracting the key information from routinely–available meteorological parameters and the emission pattern of sources present throughout the year (e.g. traffic emissions) to build a reliable and physically–based ANN air pollution forecasting tool. The methodology is tested by modeling NO2 concentrations at a site near a major highway in Auckland, New Zealand. The basic model consists of an ANN model for predicting NO2 concentrations using eight predictor variables: wind speed, wind direction, solar radiation, temperature, relative humidity, as well as “hour of the day”, “day of the week” and “month of the year” representing the time variations in emissions according to their corresponding time scales. Of the three input optimization techniques explored in this study, namely a genetic algorithm, forward selection, and backward elimination, the genetic algorithm technique gave predictions resulting in the smallest mean absolute error. The nature of the internal nonlinear function of the trained genetically–optimized neural network model was then extracted based on the response of the model to perturbations to individual predictor variables through sensitivity analyses. A simplified model, based on the successive removal of the least significant meteorological predictor variables, was then developed until subsequent removal resulted in a significant decrease in model performance. The developed ANN model was found to outperform a linear regression model based on the same input parameters. The proposed approach illustrates how the ANN modeling technique can be used to identify the key meteorological variables required to adequately capture the temporal variability in air pollution concentrations for a specific scenario.

In this study, dissolved air flotation (DAF) was examined as a possible treatment method for the removal of chromium from aqueous solution and plating wastewater. Two coagulants, ferric chloride and poly aluminum chloride (PAC), were used for pretreatment of wastewater. Maximum removal of chromium was achieved for poly aluminum chloride (98 %). Artificial neural network was used for the prediction of the DAF system. The best neuron used for the prediction of chromium removal percentage of interpolated wastewater was 6 %. The mean score error and the coefficient correlation were 0.0007542 and 0.997, respectively.

Bauxsol is a chemico-physically modified product of red mud and is a promising material for the removal and recovery of phosphorus from wastewater. In this study, response surface methodology (RSM) and artificial neural network (ANN) were employed to develop prediction models and also to investigate the interactions of independent experimental factors for phosphorus adsorption onto acid-activated Bauxsol. The experimental results indicated that HCl activation was effective to improve the adsorption capacity of Bauxsol. The maximum adsorption capacity of acid-activated Bauxsol was 55.72 mg/g (as P) with HCl concentration of 10.20 mol/L, temperature of 41.00 °C, and time of 5.60 h, which increased by 10.53 and 6.62 times compared with the raw red mud and Bauxsol before acid activation, respectively. The relative importance of HCl concentration in RSM and ANN models was 51.78 and 54.25 %, respectively, which illustrated that HCl concentration played the predominant role on improving the adsorption capacity of Bauxsol. The predictive capability of RSM and ANN models was compared, and the results showed that both models provided excellent predictions with R² > 0.93. However, the ANN model showed the superiority over RSM for estimation capability.

This study focused on the pattern recognition of Malaysian air quality based on the data obtained from the Malaysian Department of Environment (DOE). Eight air quality parameters in ten monitoring stations in Malaysia for 7 years (2005–2011) were gathered. Principal component analysis (PCA) in the environmetric approach was used to identify the sources of pollution in the study locations. The combination of PCA and artificial neural networks (ANN) was developed to determine its predictive ability for the air pollutant index (API). The PCA has identified that CH₄, NmHC, THC, O₃, and PM₁₀are the most significant parameters. The PCA-ANN showed better predictive ability in the determination of API with fewer variables, with R²and root mean square error (RMSE) values of 0.618 and 10.017, respectively. The work has demonstrated the importance of historical data in sampling plan strategies to achieve desired research objectives, as well as to highlight the possibility of determining the optimum number of sampling parameters, which in turn will reduce costs and time of sampling.

In this study, an artificial neural networks (ANN) model was developed to predict the removal of a polycyclic aromatic hydrocarbon (PAH), namely, naphthalene from marine oily wastewater by using UV irradiation. The removal rate was used as model output and simulated as a function of five independent input variables, including fluence rate, salinity, temperature, initial concentration and reaction time. The configuration of the ANN model was optimized as a three-layer feed-forward Levenberg–Marquardt backpropagation network with log-sigmoid and linear transfer functions at the hidden (12 hidden neurons) and output layers, respectively. By considering goodness-of-fit and cross validated predictability, the ANN model was trained to provide good overall agreement with experimental results with a slope of 0.97 and a correlation of determination (R ²) of 0.943. Sensitivity analysis revealed that fluence rate and temperature were the most influential variables, followed by reaction time, salinity and initial concentration. The findings of this study showed that neural network modeling could effectively predict the behavior of the photo-induced PAH degradation process.

The application of advanced oxidation process (AOP) in the treatment of wastewater contaminated with oil was investigated in this study. The AOP investigated is the homogeneous photo-Fenton (UV/H₂O₂/Fe⁺²) process. The reaction is influenced by the input concentration of hydrogen peroxide H₂O₂, amount of the iron catalyst Fe⁺², pH, temperature, irradiation time, and concentration of oil in the wastewater. The removal efficiency for the used system at the optimal operational parameters (H₂O₂ = 400 mg/L, Fe⁺² = 40 mg/L, pH = 3, irradiation time = 150 min, and temperature = 30 °C) for 1,000 mg/L oil load was found to be 72 %. The study examined the implementation of artificial neural network (ANN) for the prediction and simulation of oil degradation in aqueous solution by photo-Fenton process. The multilayered feed-forward networks were trained by using a backpropagation algorithm; a three-layer network with 22 neurons in the hidden layer gave optimal results. The results show that the ANN model can predict the experimental results with high correlation coefficient (R² = 0.9949). The sensitivity analysis showed that all studied variables (H₂O₂, Fe⁺², pH, irradiation time, temperature, and oil concentration) have strong effect on the oil degradation. The pH was found to be the most influential parameter with relative importance of 20.6 %.

The effect of meteorological variables on surface ozone (O₃) concentrations was analysed based on temporal variation of linear correlation and artificial neural network (ANN) models defined by genetic algorithms (GAs). ANN models were also used to predict the daily average concentration of this air pollutant in Campo Grande, Brazil. Three methodologies were applied using GAs, two of them considering threshold models. In these models, the variables selected to define different regimes were daily average O₃ concentration, relative humidity and solar radiation. The threshold model that considers two O₃ regimes was the one that correctly describes the effect of important meteorological variables in O₃ behaviour, presenting also a good predictive performance. Solar radiation, relative humidity and rainfall were considered significant for both O₃ regimes; however, wind speed (dispersion effect) was only significant for high concentrations. According to this model, high O₃ concentrations corresponded to high solar radiation, low relative humidity and wind speed. This model showed to be a powerful tool to interpret the O₃ behaviour, being useful to define policy strategies for human health protection regarding air pollution.

In recent years, the application of titanium dioxide (TiO₂) as a photocatalyst in asphalt pavement has received considerable attention for purifying ambient air from traffic-emitted pollutants via photocatalytic processes. In order to control the increasing deterioration of ambient air quality, urgent and proper risk assessment tools are deemed necessary. However, in practice, monitoring all process parameters for various operating conditions is difficult due to the complex and non-linear nature of air pollution-based problems. Therefore, the development of models to predict air pollutant concentrations is very useful because it can provide early warnings to the population and also reduce the number of measuring sites. This study used artificial neural network (ANN) and neuro-fuzzy (NF) models to predict NOₓconcentration in the air as a function of traffic count (Tᵣ) and climatic conditions including humidity (H), temperature (T), solar radiation (S), and wind speed (W) before and after the application of TiO₂on the pavement surface. These models are useful for modeling because of their ability to be trained using historical data and because of their capability for modeling highly non-linear relationships. To build these models, data were collected from a field study where an aqueous nano TiO₂solution was sprayed on a 0.2-mile of asphalt pavement in Baton Rouge, LA. Results of this study showed that the NF model provided a better fitting to NOₓmeasurements than the ANN model in the training, validation, and test steps. Results of a parametric study indicated that traffic level, relative humidity, and solar radiation had the most influence on photocatalytic efficiency.

The depollution of some gaseous streams containing n-hexane is studied by adsorption in a fixed bed column, under dynamic conditions, using granular activated carbon and two types of non-functionalized hypercross-linked polymeric resins. In order to model the process, a new neuro-evolutionary approach is proposed. It is a combination of a modified differential evolution (DE) with neural networks (NNs) and two local search algorithms, the global and local optimizers, working together to determine the optimal NN model. The main elements that characterize the applied variant of DE consist in using an opposition-based learning initialization, a simple self-adaptive procedure for the control parameters, and a modified mutation principle based on the fitness function as a criterion for reorganization. The results obtained prove that the proposed algorithm is able to determine a good model of the considered process, its performance being better than those of an available phenomenological model.