Sustainability in all applied fields particularly in textiles is to protect our globe, environment, and community, where green dyed products are playing their role. For the current study, Esfand (Peganum harmala) has been explored using a green isolation tool, i.e., ultrasonic (U.S.) rays, and applied onto fabric. Different dyeing parameters have been explored statistically through response surface methodology by employing temperature (50–80°C), time (25–65 min), extract volume (15–55 mL), salt (1–5 g/100 mL), and dye bath pH (4–7) through series of experiments. For developing new shades, green mordants such as elaichi, neem, turmeric, and zeera have been utilized. It has been found that exposure of 35 mL extract of 7 pH containing 3 g/100 mL of salt as exhausting agent to U.S. rays for 30 min for the dyeing of silk at 70°C for 45 min has given maximum color strength with reddish-yellow shades. Color characteristics obtained in the CIE Lab system reveal that 5% of turmeric as meta bio-mordant has given good quality reddish-yellow shades. It is found that U.S. rays have not only good potential to isolate colorant followed by dyeing of silk under reduced condition but also the application of bio-mordants have made the process more greener, sustainable, and cleaner.

Stone crushing processes release particulates and associated noxious substances in our surroundings that are continuously destructing environmental conditions and ecosystem health. Morpho-anatomical changes in some medicinally important native species (Aerva javanica, Calotropis procera, Digera muricata, Euphorbia prostrata, Euploca strigosa, and Peganum harmala) exposed to heavy dust pollution were evaluated. These species selected on the basis of their ubiquitous distribution in the area. Two sites were selected in the Kirana Hills, Sargodha, one near stone crushers within 500-m radius (polluted) and the other 4 km away from the crushers (control) varying significantly in amount of dust particles received. A decrease in plant height of all species from dust-polluted sites was observed. Reduction in height was more prominent in species like C. procera and D. muricata. Stem sclerification increased in C. procera and E. prostrata from the polluted site that is an indication of better tolerance to dust pollution. C. procera showed increased stem and leaf epidermis, stem sclerenchyma, and stem vascular bundles, which can increase resistance to dust pollution. E. strigosa was the most sensitive species in which all morpho-anatomical factors decreased. Survival of plant species depended on specific structural modifications in dermal, mechanical, parenchymatous, and vascular tissue. Overall, dust pollution severely affected plant morphological and micro-morphological traits, but the response of selected species to dust pollution was variable. It is concluded that stem and leaf anatomical traits like size of dermal and storage tissue thickness and stomatal density are good indicators for biomonitoring of dust pollution.

Phytoremediation is an eco-friendly method for rehabilitation of mine tailing. Some heavy metals and salt-tolerant plant growth-promoting rhizobacteria (PGPR) could be beneficial in alleviating soil salinity and heavy metal stress during plant growth. The aim of this work is to select PGPR that could be used in phytoremediation process. Twenty-nine rhizobacteria are examined for their ability to grow at increasing concentrations of NaCl, Zn, Pb, Cu, and Cd. The results showed that seventeen rhizobacteria displayed high salinity and metal tolerance up to 100 g L⁻¹ of NaCl, 5 mM of Cd, 9 mM of Pb, 10 mM of Zn, and 6 mM of Cu. Moreover, almost all tested bacteria maintained their PGP traits under 10% of NaCl and multi-metal stress. Based on seedling bioassay under metallic and salt stress, using Peganum harmala L. and Lactuca sativa L., beneficial effects of seed inoculation with bacterial consortia (Mesorhizobium tamadayense, Enterobacter xiangfangensis, Pseudomonas azotifigens, and Streptomyces caelestis) have been observed in terms of root and shoot elongation. Our results show that the stress-tolerant consortium used has a great potential to sustain plants establishment in heavily disturbed soils.

Ecofriendly exploration of Arjun bark (Terminalia arjuna) is a herbal natural colorant for cotton dyeing. This is because the demand for natural dyes has been increased worldwide due to their therapeutic usage and other food, textiles, agriculture, engineering, and medical applications. Therefore, this study has been carried out due to the isolation of colorant from Arjun bark in an acidified methanolic medium after exposure to ultrasonic rays up to 60 min. Additionally, using bio-mordants, it has been found that the application of 10% of Zeera (Cuminum cyminum) extract as meta-bio-mordant, 3% of Ilaichi (Elettaria cardamomum) extract as meta-bio-mordant, and10 % of Harmal (Peganum harmala) and Neem (Azadirachta indica) extract as meta-bio-mordants has given excellent color strength. These bio-mordants have not only made the coloration process more eco-friendly, viable, and greener, but also improved color strength with various tonal effects from red to reddish brown shades. Thus, it has been found that ultrasonic treatment as an environment-friendly tool has not only enhanced the color strength of natural colorant isolated from Arjun bark onto the cotton fabric under mild conditions.

Many areas throughout the world, mainly arid and semi-arid regions, are simultaneously affected by salinity stress and heavy metal (HM) pollution. Phytoremediation of such environments needs suitable plants surviving under those combined stresses. In the present study, native species naturally growing under an extreme condition, around Qaleh-Zari copper mine located in the eastern part of Iran, with HM-contaminated saline–sodic soil, were identified to find suitable plant species for phytoremediation. For this purpose, the accumulation of HMs (Cu, Zn, Cd, and Pb) in the root and shoot (stem and leaf) of the plants and their surrounding soils was determined to find their main phytoremediation strategies: phytoextraction or phytostabilization. Seven native species surviving in such extreme condition were found, including Launaea arborescens (Batt.) Murb, Artemisia santolina Schrenk, Pulicaria gnaphalodes (Vent.) Boiss, Zygophyllum eurypterum Boiss. & Buhse, Peganum harmala L., Pteropyrum olivieri Jaub. & Spach, and Aerva javanica (Burm. f.) Juss. ex Schult. Evaluation of phytoremediation potential of the identified species based on the calculated HM bioconcentration in roots, HM translocation from roots to shoots, and HM accumulation in the shoots revealed that all of the species were metal phytostabilizers rather than hyperaccumulators. Therefore, these native species can be used for phytostabilization in the HM-contaminated saline soils to prevent HMs entering the uncontaminated areas and groundwater. Compared with the biennial low-biomass hyperaccumulators, some native species such as Z. eurypterum and A. javanica may have more economic value for phytoremediation because of a significant accumulation of HMs in their relatively higher biomass.

In this study, element content and health risk of the most popular herbs from Iran were evaluated. The samples of raw materials from 30 different herbs were purchased from the local markets of Iran. The concentration levels of some elements including macroelements (N, P, K, Ca, and Mg), micronutrients (Fe, Zn, Cu, Mn, and Na), and heavy metals (Cd, Ni, and Pb) of studied herbs were evaluated. The potential of health risks was calculated by Estimated Daily Intake (EDI), Target Hazard Quotient (THQ), and Hazard Index (HI). The analysis of variance (ANOVA) is used to test a hypothesis about differences between the mean values. The highest levels of Ca (20,000 ± 26.3 mg/kg), Mg (9600 ± 45.4 mg/kg), N (59,955 ± 11.55 mg/kg), P (6544 ± 20 mg/kg), and K (56,563.2 ± 18 mg/kg) were found in Zataria multiflora, Malva sylvestris, Acasia arbus, Cannabis sativa, and Amomum subulatum, respectively. In addition, the highest concentration levels of Fe (987 ± 75.27 mg/kg), Zn (1187.5 ± 10 mg/kg), Cu (64.2 ± 2 mg/kg), Mn (272.3 ± 66.62 mg/kg), and Na (2658.8 ± 20.3 mg/kg) were recorded in Bunium persicum, Peganum harmala, Papaver somniferum, Alpinia officinalis, and Cuminum cyminum, respectively. Acasia arbus, Anethum graveolens, and Malva sylvestris showed the highest concentration of Ni (6.07 ± 0.04 mg/kg), Cd (1.64 ± 0.16 mg/kg), and Pb (9.27 ± 0.25 mg/kg). Based on performed health risk assessment on the studied plants, EDI, THQ, and HI values of all of them were less than 1. This study indicated that there were several harmful elements in the herbs. The healthier plant species are those with the least concentration of Pb, Ni, and Cd, which include Vitex agnus-custus and Teucrium polium. On the other hand, the toxic plants with a higher concentration of Pb, Ni, and Cd included Malva sylvestris, Acasia arbus, and Anethum graveolens. In addition, evaluation of human risk assessment is an important factor for investigating the concentration of heavy metals harmful for human beings.

The revival of cultural heritage in a form of natural colorants for textile dyeing is gaining popularity due to their soothing nature and bright shades. The present study was conducted to explore the coloring potential of harmala (Peganum harmala) seeds and to improve color strength of dye using microwave radiations followed by a mordanting process. The results showed that harmala plant seeds could be an excellent source of natural dyes for cotton dyeing if the irradiated acidified methanolic extract (RE, 4 min) is used to dye un-irradiated fabric (NRC) at 85 °C for 45 min using a dye bath of pH 9.0 having salt concentration of 7 g/100 mL. Alum (1%) as pre-mordants and iron (7%) as post-mordants have improved the color strength in chemical mordanting more than other mordants employed. The bio-mordants employed reveal that 10% of acacia as pre-bio-mordants and 7% of acacia as post-bio-mordants are effective amounts to obtain high color strength. Suggested ISO standards for colorfastness illustrate that bio-mordanting has given more excellent rating as compared to chemical mordants. It is concluded that harmala seeds have a great potential to act as a source of natural colorant for cotton dyeing under the influence of microwave radiation.