In this research, successive electro-oxidation (EO) process was utilized to eliminate some of the primary organic contaminants in effluent wastewater, specifically phenol and chemical oxygen demand (COD). The performance of the electro-oxidation (EO) process was studied by using two graphite electrodes as anodes and three stainless steel electrodes as cathodes, which is a new strategy in this field. Taguchi method has been used to design experiments to approach the best experimental conditions for phenol and COD removal as significant responses. The best operating conditions that resulted in the maximum reduction of phenol and COD were current density (CD = 25 mA/cm2), pH = 4, support electrolyte (NaCl=2g/l), the distance between electrodes (Dist.=5mm), and time of 60 minutes. At these operating conditions, phenol and COD removal were 99.27% and 99.96%, respectively. This work provides important insights into a novel water and wastewater treatment method with a detailed analysis of the results.

Naphthenic acids are a group of polar organic carboxylic acids that are present in crude oil naturally. They are cycloaliphatic carboxylic acids which have 10 to 16 carbons, which gained importance since the early twentieth century because of corrosion in oil refineries. Moreover, they are the most important environmental pollutants caused by oil extraction from oil sand reserves. Heavy crude oils which have high concentration of naphthenic acids are usually considered as poor-quality oil and sold at a lower price. Often, the high concentration of naphthenic acids in crude oil reduces the life of the equipment which are used in the exploration and refining process because of corrosion. Hence, researchers are increasingly interested in the chemical properties of naphthenic acids and the acidic components of the crude oils. The most popular methods for the identification and analysis of naphthenic acids are liquid and gas chromatography (GC), liquid-liquid extraction, Fourier transform infrared spectroscopy (FTIR), and solid-phase extraction (SPE). Naphthenic acids are the most important environmental pollutants caused by oil extraction from oil sand reserves. Previous studies have revealed that naphthenic acids can be absorbed by fish, but their distribution in different tissues of fish has not been specified. Experimental samples showed the highest toxicity to fish, while there was less toxicity to invertebrates and algae. Moreover, naphthenates have various industrial utilizations; they are used in synthetic detergents, corrosion inhibitors, lubricants, fuel and oil additives, wood preservatives, insecticides, fungicides, pesticides, wetting agents, napalm thickening agents, and oil desiccants that are utilized in painting and treating wood surfaces.

Persistent pollution of surface waters by hydrocarbon compounds is one of the foremost threats to limited global freshwater resources. This study analyzed the abundance, diversity and degradative capacities of hydrocarbon-utilizing bacteria in chronically polluted Kono River in the Nigerian Niger Delta in order to establish the bacterial drivers of ecological regeneration of the river after an oil spill. The study further aimed to develop a specialized bacterial consortium for application in bioremediation interventions. Bacillus, Pseudomonas and Enterobacter spp. were predominant out of the 82 isolates obtained. Klebsiella pneumoniae and two species of Enterobacter cloacae were identified as the most efficient hydrocarbon utilizers. The isolates were also confirmed as biosurfactant producers and possessed the alkB1 and nahAc genes for degradation of aliphatics and aromatics. E. cloacae-K11, K. pneumoniae-K05, E. cloacae-K12 and their consortium were able to degrade the total petroleum hydrocarbons and polycyclic aromatic hydrocarbons in batch systems by 59.37% – 96.06% and 68.40% – 92.46% respectively. K. pneumoniae-K05 showed the greatest petroleum degradation capacity of the three isolates but hydrocarbon degradation was most efficient with the bacterial consortium. The results obtained showed no significant differences at p≤0.05 between the degradation capacities of K. pneumoniae-K05 and the consortium for PAHs but a significant difference (p≤0.05) was seen with TPH degradation. A viable hydrocarbon degrading bacterial consortium was developed at the end of the study and it was concluded that the polluted river water displayed inherent potential for effective natural attenuation.

Oil biodegradation as a weathering process has been extensively investigated over the years, especially after the Deepwater Horizon blowout. In this study, we performed microcosm experiments at 5 °C with chemically dispersed oil in non-amended seawater. We link biodegradation processes with microbial community and metagenome dynamics and explain the succession based on substrate specialization. Reconstructed genomes and 16S rRNA gene analysis revealed that Bermanella and Zhongshania were the main contributors to initial n-alkane breakdown, while subsequent abundances of Colwellia and microorganisms closely related to Porticoccaceae were involved in secondary n‑alkane breakdown and beta‑oxidation. Cycloclasticus, Porticoccaceae and Spongiiabcteraceae were associated with degradation of mono- and poly-cyclic aromatics. Successional pattern of genes coding for hydrocarbon degrading enzymes at metagenome level, and reconstructed genomic content, revealed a high differentiation of bacteria involved in hydrocarbon biodegradation. A cooperation among oil degrading microorganisms is thus needed for the complete substrate transformation. | Microbial community and metagenome dynamics during biodegradation of dispersed oil reveals potential key-players in cold Norwegian seawater | acceptedVersion

Aerobic bioremediation of oil contaminated soil was investigated on laboratory-scale for purpose of pilot-plant installation. Mineral oil was analysed using IR spectroscopy. Sediment was qualitative analysed on GC/MS. Research also included microbiological analysis.

Plant-derived saponins are bioactive surfactant compounds that can solubilize organic pollutants in environmental matrices, thereby facilitating pollutant remediation. Externally applied saponin has potential to enhance total petroleum hydrocarbon (TPH) biodegradation in the root zone (rhizosphere) of wild plants, but the associated mechanisms are not well understood. For the first time, this study evaluated a triterpenoid saponin (from red ash leaves, Alphitonia excelsa) in comparison to a synthetic surfactant (Triton X-100) for their effects on plant growth and biodegradation of TPH in the rhizosphere of two native wild species (a grass, Chloris truncata, and a shrub, Hakea prostrata). The addition of Triton X-100 at the highest level (1000 mg/kg) in the polluted soil significantly hindered the plant growth (reduced plant biomass and photosynthesis) and associated rhizosphere microbial activity in both the studied plants. Therefore, TPH removal in the rhizosphere of both plant species treated with the synthetic surfactant was not enhanced (at the lower level, 500 mg/kg soil) and even slightly decreased (at the highest level) compared to that in the surfactant-free (control) treatment. By contrast, TPH removal was significantly increased with saponin application (up to 60% in C. truncata at 1000 mg/kg due to enhanced plant growth and associated rhizosphere microbial activity). No significant difference was observed between the two saponin application levels. Dehydrogenase activity positively correlated with TPH removal (p < 0.001) and thus this parameter could be used as an indicator to predict the rhizoremediation efficiency. This work indicates that saponin-amended rhizoremediation could be an environmentally friendly and effective biological approach to remediate TPH-polluted soils. It was clear that the enhanced plant growth and rhizosphere microbial activity played a crucial role in TPH rhizoremediation efficiency. The saponin-induced molecular processes that promoted plant growth and soil microbial activity in the rhizosphere warrant further studies.

Soil polycyclic aromatic hydrocarbons (PAHs) generated from industrial processes are highly spatially heterologous, with limited quantitative studies on their main influencing factors. The present study evaluated the soil PAHs in three types of industrial parks (a petrochemical industrial park, a brominated flame retardant manufacturing park, and an e-waste dismantling park) and their surroundings. The total concentrations of 16 PAHs in the parks were 340–2.43 × 10³, 26.2–2.63 × 10³, and 394–2.01 × 10⁴ ng/g, which were significantly higher than those in the surrounding areas by 1–2 orders of magnitude, respectively. The highest soil PAH contamination was observed in the e-waste dismantling park. Nap can be considered as characteristic pollutant in the petrochemical industrial park, while Phe in the flame retardant manufacturing park and e-waste dismantling park. Low molecular weight PAHs (2–3 rings) predominated in the petrochemical industrial park (73.0%) and the surrounding area of brominated flame retardant manufacturing park (80.3%). However, high molecular weight PAHs (4–6 rings) were enriched in the other sampling sites, indicating distinct sources and determinants of soil PAHs. Source apportionment results suggested that PAHs in the parks were mainly derived from the leakage of petroleum products in the petroleum manufacturing process and pyrolysis or combustion of fossil fuels. Contrarily, the PAHs in the surrounding areas could have been derived from the historical coal combustion and traffic emissions. Source emissions, wind direction, and local topography influenced the PAH spatial distributions.

As typical pollutants, petroleum hydrocarbons that are widely present in various environmental media such as soil, water, sediments, and air, seriously endanger living organisms and human health. In the meantime, as a green environmental technology that integrates pollutant removal and resource recovery, bioelectrochemical systems (BESs) have been extensively applied to the removal of petroleum hydrocarbons from the environment. This review introduces working principles of BESs, following which it discusses the different reactor structures, application progresses, and key optimization factors when treating water, sewage sludges, sediments, and soil. Furthermore, bibliometrics was first used in this field to analyze the evolution of knowledge structure and forecast future hot topics. The research focus has shifted from the early generation of bioelectric energy to exploring mechanisms of soil remediation and microbial metabolisms, which will be closely integrated in the future. Finally, the future prospects of this field are proposed. This review focuses on the research status of bioelectrochemical degradation of petroleum hydrocarbons and provides a scientific reference for subsequent research.