Microplastics pollution has become a matter of global concern because of its effects on aquatic life and the ecosystem. This study investigated the abundance and types of microplastics found in an urban canal of Thailand. Water quality and the relationship between microplastics pollutants and the physicochemical properties of water quality were also analyzed to provide evidence for this study. The mean abundance of microplastics was 370 ± 140 particle(p)/m3. The highest number and concentration of microplastics were found on surface water corelated with urbanization. Transparent brown and transparent colors in the form of film and fiber/lines were the predominant morphology. Polypropylene (PP) and polyethylene (PE) were the most abundant polymer type in all surface water samples. Furthermore, water quality was related with microplastic pollution. The physicochemical properties of turbidity (0.99), conductivity (0.97), total solid (0.95) and biological oxygen demand (0.84) were accounted for greatest influences on microplastics distribution. The estimated equation of microplastics was also closely corelated with water quality. These results demonstrate that microplastic pollution has progressed more in poor water quality than good water quality, indicating that the inflow process and sources of microplastics are similar to those of other pollutants. Therefore, this study is expected to encourage and enforce solid waste and wastewater management policies that prevent microplastics pollution in the environment.

Severodvinsk city is the largest industrial center for the construction and repair of naval vessels in the NW Russia. The purpose of the presented study was to identify the main sources of pollution of the Severodvinsk industrial region and assess the ecological situation based on analysis of toxic metals in water and snow. Heavy metals content in water, melt snow filtrate and solid residue was measured using ICP-MS. On the urban area, there were high concentrations of Fe (up to 2843 MPC) in soluble form of snow, Al (up to 4680 MPC), Fe (up to 2807 MPC), Ni (up to 66.5 MPC), Pb (up to 44.7 MPC), Cd (up to 43.3 MPC), Cr (up to 43.2 MPC), Mn (up to 13.3 MPC), Co (up to 7.3 MPC), and As (up to 3.4 MPC) in insoluble form of snow, Fe (up to 56213 MPC) in water from wells. There were high values of mineralization (598 mg/L) and low pH values (to 5.21) in sites most susceptible to anthropogenic pollution. Statistical analysis showed that most of the metals in snow cover were linked with each other by strong correlation (r>0.9). Calculation of toxicological indices HMEI, HMPI, HMTL, HI and CR showed extremely high and dangerous for public health level of heavy metal pollution in the Severodvinsk industrial district. Studied radiation parameters of water from wells were within acceptable limits. Results obtained indicate the need to change the type of fuel in thermal power plant and reduce toxic emissions from the shipbuilding enterprises.

Phenols have attracted global interest in the sphere of environmental management due to their potential toxicity on human health. This study determined concentrations of three priority phenolic compounds in effluent and water of a local textile industry in Abeokuta, Nigeria.  During tie-dye production, triplicates of effluent, well water, stream and control water were collected three times from five points to give a total of forty-five samples. Physicochemical parameters of samples including temperature, pH, electrical conductivity (EC), total suspended solids (TSS) and total dissolved solids (TDS) were determined according to standard methods while the concentrations of the priority phenolic compounds (4-nitrophenol, 4-chloro-3-methylphenol and 2, 4-dinitrophenol) were determined using High Performance Liquid Chromatography equipped with Ultra-Violet detector (HPLC/UV). Data obtained were subjected to descriptive (mean and standard deviation) and inferential (ANOVA) statistics. pH, EC and TSS of effluent and water samples were higher than the permissible limits of World Health Organization (WHO) and Federal Environmental Protection Agency (FEPA) while temperature of the effluent samples and TDS of the well water samples were within standard values. Higher concentrations of the priority phenolic compounds occurred in effluent than water samples but 4-nitrophenol was below detection limit (DL) in water samples. Concentrations of 4-nitrophenol, 4-chloro-3-methylphenol and 2,4-dinitrophenol in effluent exceeded stipulated standard of WHO (0.01 mg/L) and water samples. High concentrations of phenols in water bodies at the local textile industry suggest uncontrolled discharge of effluent from the industry which could eventually reach surface and ground water with potential significant health implications to the populace.

Water quality has recently emerged as one of the utmost severe ecological problems being faced by the developing countries all over the world, and Bangladesh is no exception. Both surface and groundwater sources contain different contaminants, which lead to numerous deaths due to water-borne diseases, particularly among children. This study presents one of the most comprehensive reviews on the current status of water quality in Bangladesh with a special emphasis on both conventional pollutants and emerging contaminants. Data show that urban rivers in Bangladesh are in a critical condition, especially Korotoa, Teesta, Rupsha, Pashur, and Padma. The Buriganga River and few locations in the Turag, Balu, Sitalakhya, and Karnaphuli rivers have dissolvable oxygen (DO) levels of almost zero. Many waterways contain traces of NO3, NO2, and PO4-3 pollutants. The majority of the rivers in Bangladesh also have Zn, Cu, Fe, Pb, Cd, Ni, Mn, As, and Cr concentrations that exceed the WHO permissible limits for safe drinking water, while their metal concentrations exceed the safety threshold for irrigation. Mercury poses the greatest hazard with 90.91% of the samples falling into the highest risk category. Mercury is followed by zinc 57.53% and copper 29.16% in terms of the dangers they pose to public health and the ecosystem. Results show that a considerable percentage of the population is at risk, being exposed to contaminated water. Despite hundreds of cryptosporidiosis cases reported, fecal contamination, i.e., Cryptosporidium, is totally ignored and need serious considerations to be regularly monitored in source water.

The ecotoxicology of surfactants is attracting wide attention due to the rapidly expanding global application. As interspecific relationships play one of the central roles in structuring biological communities, it is necessary to take it into risk assessments on surfactants. With this aim, our study investigated the interference of three common surfactants on the inducible defense of a freshwater phytoplankton Scenedesmus obliquus. Nonlethal environmentally relevant concentrations (10 and 100 μg L⁻¹) of several surfactants were set up. Results showed that growth and photosynthetic efficiency of Scenedesmus were inhibited during first 96 h, but recovered in the later stage. Surfactants interfered inducible defense of Scenedesmus against Daphnia grazing, and the interference was related to chemical characteristics of surfactants. The anionic surfactant sodium dodecyl sulfate (SDS) enhanced the colony formation even without grazing cues, whereas fewer defensive colonies were formed under the effects of cationic surfactant benzalkonium bromide (BZK) and nonionic surfactant polyoxyethylene (40) nonylphenol ether (NPE). These findings highlighted the sensitivity of grazer-induced morphological defense of Scenedesmus to surfactants even at nonlethal concentrations, which potentially affects the energy and information flow between trophic levels. This study appeals for more attention to take interspecific relationships into consideration in assessing the potential ecological risk of pollutants.

Soil antibiotic resistome and the nitrogen cycle are affected by florfenicol addition to manured soils but their interactions have not been fully described. In the present study, antibiotic resistance genes (ARGs) and nitrogen cycle genes possessed by soil bacteria were characterized using real-time fluorescence quantification PCR (qPCR) and metagenomic sequencing in a short-term (30 d) soil model experiment. Florfenicol significantly changed in the abundance of genes conferring resistance to aminoglycosides, β-lactams, tetracyclines and macrolides. And the abundance of Sphingomonadaceae, the protein metabolic and nitrogen metabolic functions, as well as NO reductase, nitrate reductase, nitrite reductase and N₂O reductase can also be affected by florfenicol. In this way, ARG types of genes conferring resistance to aminoglycosides, β-lactamases, tetracyclines, colistin, fosfomycin, phenicols and trimethoprim were closely associated with multiple nitrogen cycle genes. Actinobacteria, Chlorobi, Firmicutes, Gemmatimonadetes, Nitrospirae, Proteobacteria and Verrucomicrobia played an important role in spreading of ARGs. Moreover, soil physicochemical properties were important factors affecting the distribution of soil flora. This study provides a theoretical basis for further exploration of the transmission regularity and interference mechanism of ARGs in soil bacteria responsible for nitrogen cycle.

Microplastics (MPs), as a new type of environmental pollutant, pose a serious threat to soil ecosystems. The activities of soil extracellular enzymes produced by microorganisms are the potential sensitive indicators of soil quality. However, little is known about the response mechanism of enzyme activities toward MPs on a long-term scale. Moreover, information on differences in enzyme activities across different soil aggregates is lacking. In this study, 150 days of incubation experiments and soil aggregate fractionation were combined to investigate the influence of MPs on extracellular enzyme activities in soil. 28% concentration of polyethylene with size 100 μm was adopted in the treatments added with MPs. The results show that MPs inhibited enzyme activities through changing soil nutritional substrates and physicochemical properties or through adsorption. Moreover, MPs competed with soil microorganisms for physicochemical niches to reduce microbial activity and eventually, extracellular enzyme activity. Enzyme activities in different aggregate-size fractions responded differently to the MPs exposure. The catalase in the coarse particulate fraction and phenol oxidase and β-glucosidase in the micro-aggregate fraction exerted the greatest response. With comparison, urease, manganese peroxidase, and laccase activities showed the greatest responses in the non-aggregated silt and clay fraction. These observations are believed to stem from differences in the key factors determining the enzyme activities in different aggregate-size fractions.The inhibitory pathway of microplastics on activities of extracellular enzymes in soil varies significantly across different aggregate fractions.

Legacy perfluoroalkyl and poly-fluoroalkyl substances (PFASs) are gradually phased out because of their persistence, bioaccumulation, toxicity, long-distance transport and ubiquity in the environment. Alternatively, emerging PFASs are manufactured and released into the environment. It is accepted that PFASs can impact microbiota, although it is still unclear whether emerging PFASs are toxic towards soil microbiota. However, it could be assumed that OBS could impact soil microorganisms because it had similar chemical properties (toxicity and persistence) as legacy PFASs. The present study aimed to explore the influences of an emerging PFAS, namely sodium p-perfluorous nonenoxybenzene sulfonate (OBS), on archaeal, bacterial, and ammonia-oxidizing archaea (AOA) and bacteria (AOB) communities and ammonia oxidation. Grassland soil was amended with OBS at different dosages (0, 1, 10 and 100 mg/kg). After OBS amendment, tolerant microorganisms (e.g., archaea and AOA) were promoted, while susceptive microorganisms (e.g., bacteria and AOB) were inhibited. OBS amendment greatly changed microbial structure. Potential nitrifying activity was inhibited by OBS in a dose-dependent manner during the whole incubation. Furthermore, AOB might play a more important role in ammonia oxidation than AOA. Overall, OBS influenced ammonia oxidation by regulating the activity, abundance and structure of ammonia-oxidizing microorganisms, and could also exert influences on total bacterial and archaeal populations.

There is an increasing awareness of the threats posed by the worldwide presence of microplastics (MPs) in the environment. Due to their high persistence, MPs will accumulate in the environment and their quantities tend to increase with time. MPs end up in environments where often also chemical contaminants are present. Since the early 2000s, the number of studies on the sorption of chemicals to plastic particles has exponentially increased. The objective of this study was to critically review the literature to identify the most important factors affecting the sorption of chemical contaminants to MPs. These factors include the physicochemical properties of both the MPs and the chemical contaminants as well as environmental characteristics. A limited number of studies on soil together with an increased notion of the importance of this compartment as a final sink for MPs was observed. Therefore, we assessed the distribution of model chemicals (two PCBs and phenanthrene) in the soil compartment in the presence of MPs using a mass balance model. The results showed a high variation among chemicals and microplastic types. Overall, a higher partitioning to MPs of chemical contaminants in soil is expected in comparison to aquatic environments. As sorption to a large extent determines bioavailability, the effects of combined exposure to chemicals and MPs on the toxicity and bioaccumulation in biota are discussed. Finally, some considerations regarding sorption and toxicity studies using MPs are given.