Greenhouse experiment was conducted for four months using Leucaena leucocephala and Pleurotus tuber-regium to determine their bioremediation potentials. Leucaena leucocephala, Pleurotus tuber-regium and Leucaena leucocephala combined with Pleurotus tuber-regium were tested for their ability to improve nutrient (N, P, K, total organic carbon) and reduce heavy metals (Zn, Ni, Pb, Cu) of soil polluted with spent engine oil [5% (w/v)] and soil without spent engine oil was used as control. Bioaccumulation of nutrients and heavy metals in Leucaena leucocephala and Pleurotus tuber-regium were also determined. The highest reduction in Zn, Ni, Pb and Cu (41%, 48.39%, 61.60 and 52.72% respectively) were recorded in soil remediated with Leucaena leucocephala alone, reduction of 30.40%, 26.53%, 48.07% and 39.60% respectively were recorded in soil remediated with Pleurotus tuber-regium alone while in soil remediated with combined Pleurotus tuber-regium and Leucaena leucocephala, reductions of 32.7%, 33.43%, 88.41% and 46.22% respectively were recorded. Bioaccumulation of Zn, Ni, Pb and Cu in Leucaena leucocephala increased by 73.41%, 85.46%, 3366.04% and 125.53% respectively, similarly in Pleurotus tuber-regium by 30.16%, 21.67%, 71.11% and 53.21% respectively. These studies have shown that Pleurotus tuber-regium and Leucaena leucocephala are capable of bioremediating spent engine oil polluted soil although, treatment with Leucaena leucocephala alone tends to be most effective of these treatments.

The coir industry in India’s southern coastal regions, especially in the state of Kerala, is becoming increasingly concerned about the environmental impact of the accumulation and incremental increase of coir pith each year. The objective of this study was to assess the effect of pretreatment on the anaerobic digestion of coir pith. The characterization study of coir pith shows high organic content, which can be anaerobically digested to produce biogas. But, the high lignin content (30.91%) makes the process slow. To overcome this, a biological pretreatment method was tried using two microbial cultures belonging to fungal genera known to be lignin decomposers, viz., Trichoderma and Pleurotus. By using Trichoderma, lignin content was reduced by 3.7%, and the maximum gas production was obtained in a shorter time (19 days) in comparison with the sample without any pretreatment (24 days). When Pleurotus was used for lignin degradation, the lignin content was reduced by 6.78%, and the maximum gas production was obtained in a much shorter time period (14 days) in comparison with the former two methods. The gas produced comprises 74 ppm of methane, which has fuel value. The sludge after digestion was tested, which indicated a marginal increase in NPK value and hence can be used as fertilizer. The results of the study appear to be quite promising in the transition towards green energy by providing scope for the process of biomethanation, with the conclusion that further research can transform coir pith into a good renewable energy resource.

The coir industry in India’s southern coastal regions, especially in the state of Kerala, is becoming increasingly concerned about the environmental impact of the accumulation and incremental increase of coir pith each year. The objective of this study was to assess the effect of pretreatment on the anaerobic digestion of coir pith. The characterization study of coir pith shows high organic content, which can be anaerobically digested to produce biogas. But, the high lignin content (30.91%) makes the process slow. To overcome this, a biological pretreatment method was tried using two microbial cultures belonging to fungal genera known to be lignin decomposers, viz., Trichoderma and Pleurotus. By using Trichoderma, lignin content was reduced by 3.7%, and the maximum gas production was obtained in a shorter time (19 days) in comparison with the sample without any pretreatment (24 days). When Pleurotus was used for lignin degradation, the lignin content was reduced by 6.78%, and the maximum gas production was obtained in a much shorter time period (14 days) in comparison with the former two methods. The gas produced comprises 74 ppm of methane, which has fuel value. The sludge after digestion was tested, which indicated a marginal increase in NPK value and hence can be used as fertilizer. The results of the study appear to be quite promising in the transition towards green energy by providing scope for the process of biomethanation, with the conclusion that further research can transform coir pith into a good renewable energy resource.

Olive oil mill wastewater (OMW) generates a wide variety of pollutants depending on the production process and other factors such as olive varieties and cultivation system. Efforts to mitigate the impact of these effluents in the environment have been made by developing more efficient treatment systems in terms of removal of chemical oxygen demand (COD), color, organic compounds, and toxicity. This study is the first that reports the potential of a treatment of OMW by biocomposites of silica–alginate–fungi (Pleurotus sajor caju and Trametes versicolor). The treatment by biocomposites can be considered as a three-step process responsible for the removal of the compounds: (1) adsorption of reactants on the monolithic structure and diffusion to the biological active sites, (2) biodegradation by the fungi, and (3) diffusion of the products resulting from the biodegradation. Both treatments tested showed potential capacity to remove organic compounds, color, COD, and toxicity. The T. versicolor biocomposites were the most effective and responsible for the reduction in color (from 38.4 to 44.9 %), COD (from 42.8 to 63.8 %), and total phenolic content (from 85.3 to 88.7 %) after 29 days of treatment. The toxicity reduction on Portuguese OMW was minimal, but the use of composites on the Moroccan OMW caused a 9.5- to 19-fold reduction in toxicity. Furthermore, the biocomposites showed potential for re-utilization for more 29 days of treatment.

Background, aim and scope Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent). Material and methods The tertiary treatment with P. sajor caju, T. versicolor and P. chrysosporium and R. oryzae was performed in batch reactors, which were inoculated with separate fungi species and monitored throughout the incubation period. Samples from effluent after secondary and after tertiary treatment with fungi were analysed for both absorbance and organic compounds. The samples were extracted for organic compounds using solid-phase extraction (SPE) and analysed by gas chromatography-mass spectrometry (GC/MS). The efficiencies of the SPE procedure was evaluated by recovery tests. Results A total of 38 compounds (carboxylic acids, fatty alcohols, phenolic compounds and sterols) were identified and quantified in the E. globulus bleached kraft pulp mill final effluent after secondary treatment. Recoveries from the extraction procedure were between 98.2% and 99.9%. The four fungi species showed an adequate capacity to remove organic compounds and colour. Tertiary treatment with R. oryzae was able to remove 99% of organic compounds and to reduce absorbance on 47% (270 nm) and 74% (465 nm). P. sajor caju, T. versicolor and P. chrysosporium were able to remove 97%, 92% and 99% of organic compounds, respectively, and reduce 18% (270 nm) to 77% (465 nm), 39% (270 nm) to 58% (465 nm) and 31% (270 nm) to 10% (465 nm) of absorbance, respectively. Discussion The wide variety of organic compounds found in the final effluent must be due to the degradation of E. globulus wood in pulp and paper mill. The concentrations of organic compounds in the final effluent of E. globulus bleached kraft pulp mill were in residual levels maybe due to the secondary treatment. The recovery tests showed the effectiveness of the extraction procedure, and no losses of analyte were suspected in the analytical determinations. Lignin derivatives such as vanilic acid, syringic acid, guaiacol, syringol and phloroglucinol were totally removed by R. oryzae, but the 47% absorbance reduction obtained at 270 nm suggests that these species were not able to complete degradation of lignin macromolecular compounds. Conclusions The organic compounds (carboxylic acids, fatty alcohols, phenolic compounds and sterols) were removed more efficiently by tertiary treatment with R. oryzae or P. chrysosporium, followed by P. sajor caju and T. versicolor. Regarding the removal of both colour and organic compounds, the tertiary treatment with R. oryzae was the most efficient. Recommendations and perspectives In order to reduce the deleterious impacts of paper mill effluents, efforts have been made to develop more effective advanced tertiary treatments. This study may serve as a basis of characterisation, in terms of organic compounds of E. globulus bleached kraft pulp mill final effluent after secondary treatment and as an effort to understand the effects of tertiary treatments with fungi on low concentrations of organic compounds from biological secondary treatment.

Bioremediation of mixed metal–organic soil pollution constitutes a difficult task in different ecosystems all around the world. The aims of this work are to determine the capacity of two spent mushroom substrates (Agaricus bisporus and Pleurotus ostreatus) to immobilize Cd and Pb, to assess the effect of these metals on laccase activity, and to determine the potential of spent A. bisporus substrate to biodegrade four polycyclic aromatic hydrocarbons (PAH): fluorene, phenanthrene, anthracene, and pyrene, when those toxic heavy metals Cd and Pb are present. According to adsorption isotherms, spent P. ostreatus and A. bisporus substrates showed a high Pb and Cd adsorption capacity. Pb and Cd interactions with crude laccase enzyme extracts from spent P. ostreatus and A. bisporus substrates showed Cd and Pb enzyme inhibition; however, laccase activity of A. bisporus presented lower inhibition. Spent A. bisporus substrate polluted with PAH and Cd or Pb was able to biodegrade PAH, although both metals decrease the biodegradation rate. Spent A. bisporus substrate contained a microbiological consortium able to oxidize PAH with high ionization potential. Cd and Pb were immobilized during the bioremediation process by spent A. bisporus substrate. Consequently, spent A. bisporus substrate was adequate as a multi-polluted soil bioremediator.

Sorption and biodegradation are the main mechanisms for the removal of endocrine disruptor compounds (EDs) from both solid and liquid matrices. There are recent evidences about the capacity of white-rot fungi to decontaminate water systems from phenolic EDs by means of their ligninolytic enzymes. Most of the available studies report the removal of EDs by biodegradation or adsorption separately. This study assessed the simultaneous removal of five EDs—the xenoestrogens bisphenol A (BPA), ethynilestradiol (EE2), and 4-n-nonylphenol (NP), and the herbicide linuron and the insecticide dimethoate—from a municipal landfill leachate (MLL) using a combined sorption/bioremoval approach. The adsorption matrices used were potato dextrose agar alone or added with each of the following adsorbent materials: ground almond shells, a coffee compost, a coconut fiber, and a river sediment. These matrices were either not inoculated or inoculated with the fungus Pleurotus ostreatus and superimposed on the MLL. The residual amount of each ED in the MLL was quantified after 4, 7, 12, and 20 days by HPLC analysis and UV detection. Preliminary experiments showed that (1) all EDs did not degrade significantly in the untreated MLL for at least 28 days, (2) the mycelial growth of P. ostreatus was largely stimulated by components of the MLL, and (3) the enrichment of potato dextrose agar with any adsorbent material favored the fungal growth for 8 days after inoculation. A prompt relevant disappearance of EDs in the MLL occurred both without and, especially, with fungal activity, with the only exception of the very water soluble dimethoate that was poorly adsorbed and possibly degraded only during the first few days of experiments. An almost complete removal of phenolic EDs, especially EE2 and NP, occurred after 20 days or much earlier and was generally enhanced by the adsorbent materials used. Data obtained indicated that both adsorption and biodegradation mechanisms contribute significantly to MLL decontamination from the EDs studied and that the efficacy of the methodology adopted is directly related to the hydrophobicity of the contaminant.

Background, aim, and scope Olive oil mill wastewater (OOMW) environmental impacts minimization have been attempted by developing more effective processes, but no chemical or biological treatments were found to be totally effective to mitigate their impact on receiving systems. This work is the first that reports simultaneously the efficiency of three different approaches: biological treatment by two fungal species (Trametes versicolor or Pleurotus sajor caju), enzymatic treatment by laccase, and chemical treatment by photo-Fenton oxidation on phenols removal. Materials and methods Those treatments were performed on OOMW with or without phenol supplement (p-coumaric, vanillin, guaiacol, vanillic acid, or tyrosol). OOMW samples resulted from treatments were extracted for phenols using liquid-liquid extraction and analyzed by gas chromatography coupled to mass spectrometry. Results Treatment with T. versicolor or P. sajor caju were able to remove between 22% and 74% and between 8% and 76% of phenols, respectively. Treatment by laccase was able to reduce 4% to 70% of phenols whereas treatment by photo-Fenton oxidation was responsible for 100% phenols reduction. Discussion Range of phenol degradation was equivalent between T. versicolor, P. sajor caju and laccase for p-coumaric, guaiacol, caffeic acid, and tyrosol in supplemented OOMW, which enhances this enzyme role in the biological treatment promoted by these two species. Conclusions Phenols were removed more efficiently by photo-Fenton treatment than by biological or enzymatic treatments. Recommendations and perspectives Use of fungi, laccase, or photo-Fenton presents great potential for removing phenols from OOMW. This should be further assessed by increasing the application scale and the reactor configurations effect on the performance, besides a toxicity evaluation of treated wastewater in comparison to raw wastewater.