Recently, the adsorption-based environmental remediation techniques have gained a considerable attention, due to their economic viability and simplicity over other methods. Hence, detailed presentation and analysis were herein focused on describing the role of biochar in oil spill removal. Oil removal by utilizing biochar is assumed as a green-oriented concept. Biochar is a carbon-rich low-cost material with high porosity and specific surface chemistry, with a tremendous potentiality for oil removal from aqueous solutions. Oil sorption properties of biochar mainly depend on the biochar production/synthesis method, and the biomass feedstock type. In order to preserve the stability of functional groups in the structure, biochar needs to be produced/activated at low temperatures (<700 ᵒC). In general, biochar derived from biomass containing high lignin content via slow pyrolysis is more favorable for oil removal. Exceptional characteristics of biochar which intensify the oil removal capability such as hydrophobicity, oleophilicity or/and specific contaminant-surface interaction of biochar can be enhanced and be tuned by chemical and physical activation methods. Considering all the presented results, future perspectives such as the examination of biochar efficacy on oil removal efficiency in multi-element contaminated aqueous solutions to identify the best biomass feedstocks, the production protocols and large-scale field trials, are also discussed.

In order to solve the low sorption capacity of pristine biochar for anionic pollutants, e.g., reactive red 120 (RR120), a novel mesoporous Fe-biochar composite was fabricated in this study by combination of Fe-loading and ball-milling methods. The ball-milling Fe-biochar composite could effectively remove RR120 by up to 90.1 mg g⁻¹ at pH of 7.5, and slightly alkaline condition was preferred. Adsorption kinetics showed that ball-milling Fe-biochar composite could quickly sorb RR120 with the rate constant (k₂) of 2.07 g mg⁻¹ min⁻¹ (pH = 7.5). Positive surface charge and large surface area were responsible for the outstanding removal performance of RR120 by ball-milling Fe-biochar composite: (1) The adscititious Fe would be converted to β-FeOOH during pyrolysis, which significantly improved the zeta potential of biochar and thus facilitated the electrostatic adsorption for RR120, which contributed to 42.3% and 85.5% at pH of 3 and 7.5, respectively; (2) Ball-milling effectively increased the specific surface area and uniformed the pore size distribution, which could provide more sorption sites and expedite the diffusion of RR120 molecules, shortening the time from several hours to less than 15 min. Findings of this study not only provide a feasible modification method for biochar to adsorb anionic pollutants efficiently and rapidly, but also help to reveal the roles of Fe-loading and ball-milling in enhancing adsorption capacity.

Direct utilization of waste polyethylene terephthalate (PET) from the environment to form highly porous aerogel technology for oil absorption is an attractive approach from the view point of green chemistry. However, the oil absorption reaction is limited by low oil absorption capacity and less stability. For now, silica aerogel are used to solve these problem. Our goal is to substitute to these silica aerogel with PET aerogel technology. Herein, we have prepared an environmental waste PET based aerogel with 1.0:0.5 wt% PET, polyvinyl alcohol (PVA), and glutaraldehyde (GA) 0.2% v/v were dispersed in 10 mL DI water, followed by homogenization (30 min), sonication (10 min), and ageing (2 h) at 70 °C. To escape macroscopic cracking, cooling (8 h) at 4 °C was followed by freezing (6 h), freeze drying at −80 °C, and 5 mTorr for 18 h. The hybrid PET aerogel displays excellent performance towards oil absorption. Notably it showed high absorption capacity towards the different oils about 21–40 times its own weight, depending on the viscosity and density of the oil and solvents within 15–35 s, 25 °C, and 2 × 2 cm aerogel size. In addition, the aerogel shows there is no change in structure after several recycles due to high mechanical strength. Furthermore, because of the PET aerogel's high porosity (99.74%) and low density (0.0311 g/cm³), close bonding between PET-PVA occurs. Therefore, aerogel shows hydrophobic nature, good mechanical strength, high thermal stability, arrangement of the interconnected fibrillar pore network offers a high surface to volume ratio, low surface energy, high surface roughness, and more reusability. All these parameters are responsible for high oil absorption.

Biochar has been proven as a soil amendment to improve soil environment. However, mechanistic understanding of biochar on soil physical properties and microbial community remains unclear. In this study, a wood biochar (WB), was incorporated into a highly weathered tropical soil, and after 1 year the in situ changes in soil properties and microbial community were evaluated. A field trial was conducted for application of compost, wood biochar, and polyacrylamide. Microstructure and morphological features of the soils were characterized through 3D X-ray microscopy and polarized microscopy. Soil microbial communities were identified through next-generation sequencing (NGS). After incubation, the number of pores and connection throats between the pores of biochar treated soil increased by 3.8 and 7.2 times, respectively, compared to the control. According to NGS results, most sequences belonged to Anaerolinea thermolimosa, Caldithrix palaeochoryensis, Chthoniobacter flavus, and Cohnella soli. Canonical correlation analysis (CCA) further demonstrated that the microbial community structure was determined by inorganic N (IN), available P (AP), pH, soil organic C (SOC), porosity, bulk density (BD), and aggregate stability. The treatments with co-application of biochar and compost facilitated the dominance of Cal. palaeochoryensis, Cht. flavus, and Coh. soli, all of which promoted organic matter decomposition and ammonia oxidation in the soil. The apparent increases in IN, AP, porosity, and SOC caused by the addition of biochar and compost may be the proponents of changes in soil microbial communities. The co-application of compost and biochar may be a suitable strategy for real world biochar incorporation in highly weathered soil.

The importance of hydrochar properties for soil application is well known, but the effects of natural aging on hydrochar properties remain ambiguous. The present study aimed to determine the shift patterns in the physicochemical properties of hydrochar through a 16-month soil column aging experiment conducted in a rice-wheat rotation system with hydrochars derived from a wheat straw at 220 °C and 260 °C. Obvious decreasing hydrophilic/polarity indices and increasing porosity, ash content, and stability occurred in aged hyrdrochar, which were due to the dissolved organic matter (DOM) leaching and the interaction with mineral content and fertilizer during the 16-month aging process. Besides, fewer C–OH, slightly more CO, and higher aromaticity (C–C/CC) in aged hydrochar were observed. Meanwhile, the relative abundance of the compounds containing only C, H, and O atoms in water extract of aged hydrochar decreased, while that of the compounds containing C, H, O, and N atoms increased during aging; these findings were attributed to the less labile DOM and microbial degradation and the retention of some plant-derived dissolved organic carbon, respectively. This study provided 16-month aging characterization data regarding alteration in hydrochar physicochemical properties, which was conducive to make a better understanding of the use of hydrochars as sustainable soil amendments from agroecosystems and environmental perspective.

Urban street canyons formed by high-rise buildings restrict the dispersion of vehicle emissions, which pose severe health risks to the public by aggravating roadside air quality. However, this issue is often overlooked in city planning. This paper reviews the mechanisms controlling vehicle emission dispersion in urban street canyons and the strategies for managing roadside air pollution. Studies have shown that air pollution hotspots are not all attributed to heavy traffic and proper urban design can mitigate air pollution. The key factors include traffic conditions, canyon geometry, weather conditions and chemical reactions. Two categories of mitigation strategies are identified, namely traffic interventions and city planning. Popular traffic interventions for street canyons include low emission zones and congestion charges which can moderately improve roadside air quality. In comparison, city planning in terms of building geometry can significantly promote pollutant dispersion in street canyons. General design guidelines, such as lower canyon aspect ratio, alignment between streets and prevailing winds, non-uniform building heights and ground-level building porosity, may be encompassed in new development. Concurrently, in-street barriers are widely applicable to rectify the poor roadside air quality in existing street canyons. They are broadly classified into porous (e.g. trees and hedges) and solid (e.g. kerbside parked cars, noise fences and viaducts) barriers that utilize their aerodynamic advantages to ease roadside air pollution. Post-evaluations are needed to review these strategies by real-world field experiments and more detailed modelling in the practical perspective.

Herein, a pH-independent interpenetrating polymeric networks (Fe-SA-C) were fabricated from graphitic biochar (BC) and iron-alginate hydrogel (Fe-SA) for removal of Cr(VI) and Pb(II) in aqueous solution. Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and scanning electron microscope (SEM) results demonstrated that graphitic BC interpenetration increased surface porosity and distorted surfaces of Fe-SA, which boosted availability of hydroxyl (-OH) group. Fe³⁺ as a cross-linking agent of the alginate endowed Fe-SA-C with positive surfaces (positive zeta potential) and excellent pH buffering capacity, while excessive Fe³⁺ was soldered on Fe-SA-C matrix as FeO(OH) and Fe₂O₃. Cr(VI) removal at pH of 3 by Fe-SA-C (20.3 mg g⁻¹) were 30.3% and 410.6% greater than that by Fe-SA and BC, respectively. Fe-SA-C exhibited minor pH dependence over pH range of 2–7 towards Cr(VI) retention. Greater zeta potential of Fe-SA-C over Fe-SA conferred a better electrostatic attraction with Cr(VI). FTIR and XPS of spent sorbents confirmed the reduction accounted for 98.5% for Cr(VI) removal mainly due to participation of –OH. Cr(VI) reduction was further favored by conductive carbon matrix in Fe-SA-C, as evidenced by more negative Tafel corrosion potential. Reductively formed Cr(III) was subsequently complexed with carboxylic groups originating from oxidation of –OH. Thus, Cr(VI) removal invoked electrostatic attraction, reduction, and surface complexation mechanisms. Pb(II) removal with excellent pH independence was mainly ascribed to surface complexation and possible precipitation. Thus, the functionalized, conductive, and positively-charged Fe-SA-C extended its applicability for Cr(VI) and Pb(II) removal from aqueous solutions in a wide pH range. This research could expand the application of hydrogel materials for removal of both cationic and anionic heavy metals in solutions over an extended pH range.

PURPOSE OF REVIEW: Hydrothermal carbonization (HTC) is an innovative technique by which a wet feedstock is converting into valuable product, hydrochar, without drying as a pretreatment step. Over all other thermal converting process, HTC is counted as the most cost-effective and environmentally friendly technique. The purpose of this review is to highlight the current research trends of HTC and the application of hydrochar derived from biomass in heavy metal removal. RECENT FINDINGS: This review provides an overview about HTC fundamentals including its ecotoxicology and the factors such as biomass type, reaction temperature, retention time, catalysis, and pH medium, which affect hydrochar composition and performance. Moreover, various modification agents in order to function the hydrochar was discussed. It is proposed that the co-hydrothermal carbonization of two or more biomasses with the addition of other materials can enhance the functional groups and change the features of the produced hydrochar. This paper also reviews the kinetic analysis and adsorption isotherm as well as the hydrochar applications in heavy metal removal. Acacia arabica waste is produced annually in huge amount, which adversely affect the environment. Up to now, it has no specific reuse in a proper way. In this respect, biomass such as Acacia arabica wastes can successfully be valorized by converting into hydrochar via hydrothermal carbonization. Moreover, application as a green adsorbent to remove heavy metal contamination from wastewater due to its high porosity and great surface area is counted as a promising technique that contributes to this field of research.

The presence of micro/plastic particles has been reported in various seafood products. However, information on microplastics contamination in salts from African continent is very limited. This study analysed 23 brands of table salts from 8 African countries for microplastics using microscopic/spectroscopic techniques. South Africa showed the highest microplastics concentration (0–1.33 ± 0.32 particles/kg), Nigeria, Cameroun, and Ghana (0–0.33 ± 0.38 particles/kg each); characterized as polyvinyl acetate, polypropylene, and polyethylene. Other countries have no detectable microplastics at 0.3 μm filter pore size. To our best knowledge, this is the first study to characterize micro-fibres/plastics in table salts across African countries, confirming that it is an emission source of micro-fibres/plastics into the human food chain, highlighting the overarching need to understand their effects on human health.

Bacterial transport and deposition play an important role in the assessment and prediction of subsurface pollution risks. Bacteria transport experiments were performed under unsaturated flow conditions in an aggregated porous medium at the laboratory column scale, to investigate how the inter- and intra-aggregated pore space of this medium could affect transport and deposition under unsaturated flow conditions, where inter- and intra-pore spaces are not fully activated. The results obtained through experimental observations and numerical simulations showed that some intra- and inter-pore space of this medium was excluded from bacteria transport and retention, as confirmed by the non-uniform transport of bacteria pathways in the aggregated porous media under unsaturated flow conditions. Capillary energy was higher the than other forces acting at bacteria air-water-solid interfaces. If this energy should contribute in increasing bacteria deposition under unsaturated conditions, similar to what has been reported for sandy media, similar overall retention of E. coli and R. rhodochrous was obtained under unsaturated flow conditions, suggesting that capillary energy was not the driving force for bacteria deposition.