细化搜索
结果 1-10 的 178
Valorization of synthetic textile waste using CO2 as a raw material in the catalytic pyrolysis process
2021
Kwon, Dohee | Yi, So-ra | Jung, Sungyup | Kwon, Eilhann E.
Since an invention of synthetic fibers (textiles), our life quality has been improved. However, the cumulative production and disposal of them have perceived as significant since they are not biodegradable and hard to be upcycled/recycled. From washing textiles, microplastics are released into the environment, which are regarded as emerging contaminants. As a means for source reduction of microplastics, this study proposed a rapid disposal platform for waste textiles (WTs), converting them into value-added products. To this end, catalytic pyrolysis of WT was studied. To offer more environmentally sound process, CO₂ was used as a raw material for WT pyrolysis. Thermal cracking of WT led to the production of syngas and CH₄ under the CO₂ environment. CO₂ resulted in additional CO production via gas phase reaction with volatile compounds evolved from pyrolysis of WT. To expedite the reaction kinetics for syngas formation, catalytic pyrolysis was done over Co-based catalyst. Comparing to non-catalytic pyrolysis, CO₂-assisted catalytic pyrolysis had 3- and 8-times higher production of H₂ and CO, respectively. This process also suppressed catalyst deactivation, converting more than 80 wt% of WT into syngas and CH₄. The more generation of CO from the use of CO₂ as a raw material offers an effective means to minimize the formations of harmful chemical species, such as benzene derivatives and polycyclic aromatic hydrocarbons.
显示更多 [+] 显示较少 [-]Biomaterial functionalized cerium nanocomposite for removal of fluoride using central composite design optimization study
2020
Nehra, Sapna | Raghav, Sapna | Kumar, Dinesh
Excess fluoride concentration in drinking water is a global issue, as this has an adverse effect on human health. Several adsorbents have been synthesized from natural raw material to remove fluoride from water. Reported adsorbents have some problems with the leaching of metal ions, fewer adsorption sites, and low adsorption capacity. Therefore, to address this, an effective biomaterial derived from the Luffa cylindrica (LC), containing many active sites, was integrated with a nano form of cerium oxide to form a robust, biocompatible, highly porous, and reusable LC–Ce adsorbent. This synthesized biosorbent offers better interaction between the active sites of LC–Ce and fluoride, resulting in higher adsorption capacity. Several factors, influence the adsorption process, were studied by a central composite design (CCD) model of statistical analysis. Langmuir’s and Freundlich’s models well describe the adsorption and kinetics governed by the pseudo–second–order model. The maximum monolayer adsorption capacity was found to be 212 and 52.63 mg/g for LC–Ce and LC, respectively determined by the Langmuir model. Detailed XPS and FTIR analyses revealed the underlying mechanism of fluoride adsorption via ion-exchange, electrostatic interaction, H–bonding, and ion-pair formation. All the results indicate that LC–Ce could serve as a suitable adsorbent for efficient fluoride removal (80–85%).
显示更多 [+] 显示较少 [-]Preparation of 2D nitrogen-doped magnetic Fe3C/C by in-situ self-assembled double-template method for enhanced removal of Cr(VI)
2020
Su, Qiaohong | Su, Zhi | Xie, Wenyu | Tian, Chen | Su, Xintai | Lin, Zhang
Porous carbon, which can be functionalized, is considered as a potential carbon material. Herein, two-dimensional (2D) nitrogen-doped magnetic Fe₃C/C (NMC) was prepared by a simple carbonization method using potassium humate (HA-K) as raw material. Remarkably, two templates, g-C₃N₄ and KCl, were formed in situ during the carbonization process, which provide the necessary conditions for the formation of 2D NMC. The NMC was comprehensively studied by different characterization methods. The results show that NMC has a large surface area and mesoporous structure. The prepared NMC-0.50 was used to test the removal performance of Cr(VI). The effects of pH value, coexisting ions and time on Cr(VI) removal performance were investigated, and the adsorption kinetics, isotherm and thermodynamics were studied. The results showed that the adsorption isotherm model of NMC-50 accorded with the Langmuir model, and the maximum adsorption capacity was 423.73 mg g⁻¹. The reaction mechanism of Cr(VI) is adsorption and redox reaction. In addition, NMC-0.50 exhibit high selectivity, separability and regeneration performance. A convenient means for the synthesis of NMC was designed in this work, and demonstrate that NMC has practical value as an adsorbent.
显示更多 [+] 显示较少 [-]Tris(4-hydroxyphenyl)ethane (THPE), a trisphenol compound, is antiestrogenic and can retard uterine development in CD-1 mice
2020
Xiao, Han | Wang, Yue | Jia, Xiaojing | Yang, Lei | Wang, Xiaoning | Guo, Xuan | Zhang, Zhaobin
Tris (4-hydroxyphenyl)ethane (THPE), a trisphenol compound widely used as a branching agent and raw material in plastics, adhesives, and coatings is rarely regarded with concern. However, inspection of in vitro data suggests that THPE is an antagonist of estrogen receptors (ERs). Accordingly, we aimed to evaluate the antiestrogenicity of THPE in vivo and tested its effect via oral gavage on pubertal development in female CD-1 mice. Using uterotrophic assays, we found that THPE either singly, or combined with 17β-estradiol (E₂) (400 μg/kg bw/day) suppressed the uterine weights at low doses (0.1, 0.3, and 1 mg/kg bw/day) in 3-day treatment of weaning mice. When mice were treated with THPE during adolescence (for 10 days beginning on postnatal day 24), their uterine development was significantly retarded at doses of at least 0.1 mg/kg bw/day, manifest as decreased uterine weight, atrophic endometrial stromal cells and thinner columnar epithelial cells. Transcriptome analyses of uteri demonstrated that estrogen-responsive genes were significantly downregulated by THPE. Molecular docking shows that THPE fits well into the antagonist pocket of human ERα. These results indicate that THPE possesses strong antiestrogenicity in vivo and can disrupt normal female development in mice at very low dosages.
显示更多 [+] 显示较少 [-]Effects of plant additives on the concentration of sulfur and nitrogen oxides in the combustion products of coal-water slurries containing petrochemicals
2020
Nyashina, G.S. | Kuznetsov, G.V. | Strizhak, P.A.
The active use of solid fossil fuels (coal) in the production of heat and electricity has led to significant pollution, climate change, environmental degradation, and an increase in morbidity and mortality. Many countries (in particular, European ones, China, Japan, the USA, Canada, etc.) have launched programs for using plant and agricultural raw materials to produce heat and electricity by burning them instead of or together with traditional fuels. It is a promising solution to produce slurry fuels, based on a mixture of coal processing, oil refining and agricultural waste. This paper presents the results of experimental research into the formation and assessment of the most hazardous emissions (sulfur and nitrogen oxides) from the combustion of promising coal slurry fuels with straw, sunflower and algae additives, i.e. the most common agricultural waste. A comparative analysis has been carried out to identify the differences in the concentrations of sulfur and nitrogen oxides from the combustion of typical coal, coal processing waste, as well as fuel slurries with and without plant additives. It has been shown that the concentration of sulfur and nitrogen oxides can be reduced by 62–87% and 12–57%, respectively, when using small masses of plant additives (no more than 10 wt%) and maintaining high combustion heat of the slurry fuel. However, the use of algae and straw in the slurry composition can increase the HCl emissions, which requires extra measures to fight corrosion. A generalizing criterion of slurry fuel vs. coal efficiency has been formulated to illustrate significant benefits of adding plant solid waste to coal-water slurries containing petrochemicals. Straw and sunflower waste (10 wt%) were found to be the best additives to reduce the air pollutant emissions.
显示更多 [+] 显示较少 [-]Variations of PCDD/Fs emissions from secondary nonferrous smelting plants and towards to their source emission reduction
2020
Yang, Yuanping | Wu, Guanglong | Jiang, Cheng | Zheng, Minghui | Yang, Lili | Xie, Jiahong | Wang, Qingjie | Wang, Minxiang | Li, Cui | Liu, Guorui
Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are cancerogenic organic pollutants that priority controlled by Stockholm Convention with globally 183 signatories now. Secondary nonferrous smelting plants are confirmed to be important sources in China due to its large industrial activities and high emissions of PCDD/Fs. It is important to prioritize source to achieve source emission reduction by conducting field monitoring on typical case plants. Here, the emission profiles and levels of PCDD/Fs were investigated in 25 stack gas samples collected from three secondary copper production (SeCu), two secondary zinc production (SeZn) and two secondary lead production (SePb). Both average mass concentration and toxic equivalency quantity (TEQ) concentrations of PCDD/Fs all generally decreased in the order: SeCu > SeZn > SePb. It is noteworthy that the mean TEQ concentration in stack gas from SeCu with oxygen-enrich melting furnace technology, at 2.7 ng I-TEQ/Nm³, was much higher than the concentrations of other smelting processes. The average emission factors and annual release amounts of PCDD/Fs from SeCu, SePb and SeZn investigated were 28.4, 1.5, 10.4 μg I-TEQ/t and 1.03, 0.023, 0.17 g I-TEQ/year, respectively. The ratios of 2,3,7,8-TCDF to 1,2,3,7,8-PeCDF and OCDD to 1,2,3,7,8,9-HxCDD varied to large extent for three metal smelting, which could be used as diagnostic ratios of tracing specific PCDD/Fs sources. Addition of copper-containing sludge into the raw materials might lead to higher PCDD/Fs emissions. It is important to emphasize and reduce the PCDD/Fs emissions from oxygen-enrich melting furnace from secondary copper productions.
显示更多 [+] 显示较少 [-]A two-year field study of using a new material for remediation of cadmium contaminated paddy soil
2020
Zhao, Hanghang | Huang, Xunrong | Liu, Fuhao | Hu, Xiongfei | Zhao, Xin | Wang, Lu | Gao, Pengcheng | Ji, Puhui
Cadmium (Cd) as a highly toxic heavy metal can cause seriously harmful to human health. Rice consumption is a major source of Cd intake by Chinese. Reduce the Cd accumulation by rice is the key for reducing Cd hazard. Therefore, fly ash (FA) was used as raw material in this study, after the process of simplifying hydrothermal synthesis the zeolite (ZE), which was named as low-temperature-alkali roasting, a new intermediate materials (IP) was got. And the three mentioned materials (FA, IP and ZE) were used for a two-year field experiment. The study demonstrated that, application of IP and ZE could promote rice growth, as well as increase soil pH, and improve available Si content. The rice production increased by 36.1% and 29.8% in 2017 by IP and ZE applied, enhanced 35.9% and 31.7% in 2018, respectively. Meanwhile, the bio-available Cd decreased by 26.9% and 26% in 2017, reduced by 22.9% and 28% in 2018, respectively. Generally, the passivators could promote the conversion of acid-exchangeable fraction Cd to reducible fraction Cd. It can be conclude that, IP and ZE have good remediation effect on contaminated soil, and alleviated effects on Cd accumulation by rice, even though no significant difference was detected between IP and ZE. The synthesis process of IP of is simpler than ZE. The impact of IP on contaminated soil needs further exploration.
显示更多 [+] 显示较少 [-]Geochemical exposure of heavy metals in environmental samples from the vicinity of old gas mining area in northern part of Sindh Pakistan. Adverse impact on children
2019
Shaikh, Rafia | Kazi, Tasneem Gul | Afridi, Hassan Imran | Akhtar, Asma | Baig, Jameel Ahmed | Arain, Mohammad Balal
In early nineteen century, a gas field was operational in southern part of Sindh, Pakistan for power production. The plant was completely un-operational for last three decades, whereas all wastage and raw materials are still dumped there, which might be the source to contaminate the ground water. The most of the workers population still living in different villages nearby the gas field. In present study, evaluated the undesirable effects of the toxic metals (lead and cadmium) via consuming groundwater for drinking and other domestic purpose especially in children of ≤5.0 years. For comparative purpose groundwater of nonindustrial area (nonexposed) was also analysed and their impact on age matched children was carried out. Biological samples (scalp hair and blood) were collected from children of exposed and nonexposed areas. The Cd and Pb in scalp hair and blood samples were carried out by graphite furnace atomic absorption spectrometry. Whereas, Cd and Pb in groundwater obtained from both areas were determined prior to applied preconcentration method as reported in our previous works. The Cd and Pb contents in the groundwater of villages of exposed area were found in the range of 5.18–10.9 and 19.9–69.5 μg/L, respectively. Whereas, the groundwater of nonexposed area contains Cd and Pb in the range of 1.79–3.78 and 5.07–24.3 μg/L, respectively. It was observed that the concentrations of Cd and Pb in scalp hair and blood samples of children belongs to exposed area have ≥2.0 fold higher than the resulted data attained for age matched control children, indicating as the exposure biomarkers of toxic metals. The children belong to exposed area have poor health, anemic and low body mass index (<13 kg/m2). A significant positive correlations among Cd and Pb concentrations in biological samples of exposed subjects and groundwater was observed (p < 0.01).
显示更多 [+] 显示较少 [-]Brominated dioxins/furans and hydroxylated polybrominated diphenyl ethers: Occurrences in commercial 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) and 2,4,6-tribromophenol, and formation during synthesis of BTBPE
2017
Ren, Man | Zeng, Hao | Peng, Ping-An | Li, Hui-Ru | Tang, Cai-Ming | Hu, Jian-Fang
Polybrominated dibenzo-p-dioxins (PBDDs) and hydroxylated polybrominated diphenyl ethers (OH-PBDEs) can be formed from bromophenols (BPs) by thermal degradation, biosynthesis or phototransformation. However, it is unknown whether PBDDs and OH-PBDEs can be formed during the chemical production processes that utilize BPs as raw materials. 2,4,6-tribromophenol (2,4,6-TBP) is an important raw material for the synthesis of 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), a novel brominated flame retardant. In this study, PBDDs, polybrominated dibenzofurans (PBDFs) and OH-PBDEs have been identified and quantified in commercially available BTBPE and 2,4,6-TBP. Furthermore, their formation as unintentional by-products during the laboratory synthesis of BTBPE from 2,4,6-TBP and 1,2-dibromoethane in the presence of sodium carbonate has also been investigated. 2,3,7,8-substituted PBDDs and PBDFs (2,3,7,8-PBDD/Fs) were undetectable in commercial samples of BTBPE and present in low levels (nanogram per gram) in 2,4,6-TBP. Two tetrabrominated dibenzo-p-dioxins (TeBDDs), namely 1,3,6,8- and 1,3,7,9-TeBDD, and three hydroxylated pentabrominated diphenyl ethers (OH-pentaBDEs), namely 4′-OH-BDE121, 2′-OH-BDE121, and 6′-OH-BDE100, were identified or tentatively identified, and quantitatively estimated to be at concentrations in the range of undetectable to several thousands of nanograms per gram in commercial BTBPE and 2,4,6-TBP. TeBDDs and OH-pentaBDEs were formed as by-products from 2,4,6-TBP during BTBPE synthesis. Further studies need to be conducted in order to determine whether PBDD/Fs and OH-PBDEs are also formed during the industrial synthesis of other chemical compounds that utilize BPs as raw materials or intermediates.
显示更多 [+] 显示较少 [-]Cadmium bioaccumulation and gastric bioaccessibility in cacao: A field study in areas impacted by oil activities in Ecuador
2017
Barraza, F. | Schreck, E. | Lévêque, T. | Uzu, G. | López, F. | Ruales, J. | Prunier, J. | Marquet, A. | Maurice, L.
Cacao from South America is especially used to produce premium quality chocolate. Although the European Food Safety Authority has not established a limit for cadmium (Cd) in chocolate raw material, recent studies demonstrate that Cd concentrations in cacao beans can reach levels higher than the legal limits for dark chocolate (0.8 mg kg−1, effective January 1st, 2019). Despite the fact that the presence of Cd in agricultural soils is related to contamination by fertilizers, other potential sources must be considered in Ecuador. This field study was conducted to investigate Cd content in soils and cacao cultivated on Ecuadorian farms in areas impacted by oil activities. Soils, cacao leaves, and pod husks were collected from 31 farms in the northern Amazon and Pacific coastal regions exposed to oil production and refining and compared to two control areas. Human gastric bioaccessibility was determined in raw cacao beans and cacao liquor samples in order to assess potential health risks involved. Our results show that topsoils (0–20 cm) have higher Cd concentrations than deeper layers, exceeding the Ecuadorian legislation limit in 39% of the sampling sites. Cacao leaves accumulate more Cd than pod husks or beans but, nevertheless, 50% of the sampled beans have Cd contents above 0.8 mg kg−1. Root-to-cacao transfer seems to be the main pathway of Cd uptake, which is not only regulated by physico-chemical soil properties but also agricultural practices. Additionally, natural Cd enrichment by volcanic inputs must not be neglected. Finally, Cd in cacao trees cannot be considered as a tracer of oil activities. Assuming that total Cd content and its bioaccessible fraction (up to 90%) in cacao beans and liquor is directly linked to those in chocolate, the health risk associated with Cd exposure varies from low to moderate.
显示更多 [+] 显示较少 [-]