The present study was aimed at investigating the effects of different acids and pH neutralizers applied to dredged marine sediment for the treatment of heavy metals, and the resulting influence on the sediment quality as a plant growth medium. The inspection of barley germination in the dredged marine sediment revealed that residual salts are critical plant stressors whose adverse effects exceed those exhibited by high-level heavy metals and petroleum hydrocarbons present in the sediment. Acid washing and pH neutralization reduced not only the heavy metal contents but also the sediment salinity (by factors of 6.1–9.5), resulting in 100% germination of barley. For acid-washed and calcium-oxide-neutralized sediment, the barley growth was comparable to that observed in untreated and water washed sediment despite factors of 5.2–8.0 greater sediment salinity in the former. This result represents the protective effect of residual calcium against sodium and chloride toxicity. Water washing of acid-washed and pH-neutralized sediments further enhanced barley growth owing to the reduction in osmotic pressure. This study showed the effect of different sediment-washing reagents on the product quality. It also indicated the significance of balancing the enhancement of product quality and economic cost of further treatment requirements.

This study forms the first basic assessment of microphytobenthos (MPB) dynamics in micro-estuaries and micro-outlets in southern Africa. It examines MPB community responses to environmental variables and further investigates MPB composition qualitatively across different micro-estuaries and micro-outlets over four seasons in a warm temperate region of the subcontinent. Combinations of multivariate analyses were used to explore similarities and differences in MPB communities between systems. Human-induced catchment changes between microsystems ranged from no alteration (rating 0; mostly micro-outlets) to extreme modification (rating 5; mostly micro-estuaries). Two hundred and sixty-seven MPB taxa were identified within all the microsystems, with 247 and 230 MPB taxa being observed in the micro-estuaries and micro-outlets, respectively. The MPB communities differed slightly in terms of microsystem types and seasons, but no significant differences were observed. Multivariate analyses (i.e. Boosted Regression Trees, Canonical Correspondence Analysis) showed that water column variables were significant and important in structuring MPB communities, with soluble reactive phosphorus, sediment pH, turbidity, ammonium and temperature being documented as key drivers. The MPB community composition clearly reflected the influence of catchment anthropogenic activities on species composition and structure. Moderately modified catchments resulted in MPB community structure variation among water bodies in relationship to land use and salinity gradients. The study found that; (i) by virtue of their size, microsystems and their catchments are likely to be particularly vulnerable to anthropogenic pressures when compared to systems of larger size; (ii) a typical impacted state may reflect reduced environmental heterogeneity which, compared to larger systems, may be achieved over much shorter time periods (following a particular event) or under much less intensive impacts; and (iii) the response in terms of MPB structure may predictably reflect a concomitant change from a complex community dynamic (structure and spatio-temporal attributes) to one that approaches a homogeneous structure (poor spatial zonation, strong taxonomic dominance, low species diversity).

Sea level rise induced-salinization is lowering coastal soils productivity. In order to assess the effects that increased salinity may provoke in terrestrial plants, using as model species: Trifolium pratense, Lolium perenne, Festuca arundinacea and Vicia sativa, two specific objectives were targeted: i) to determine the sensitivity of the selected plant species to increased salinity (induced by seawater-SW or by NaCl, proposed as a surrogate of SW) and, ii) to assess the influence of salinization in total biomass under different agricultural practices (mono- or polycultures).The four plant species exhibited a higher sensitivity to NaCl than to SW. Festuca arundinacea was the most tolerant species to NaCl (EC₅₀,ₛₑₑd gₑᵣₘᵢₙₐₜᵢₒₙ and EC₅₀,gᵣₒwₜₕ of 18.6 and 10.5 mScm⁻¹, respectively). The other three species presented effective conductivities in the same order of magnitude and, in general, with 95% confidence limits overlapping. Soil moistened with SW caused no significant adverse effects on seed germination and growth of L. perenne. Similar to NaCl, the other three species, in general, presented a similar sensitivity to SW exposure with EC₅₀,ₛₑₑd gₑᵣₘᵢₙₐₜᵢₒₙ and EC₅₀,gᵣₒwₜₕ within the same order of magnitude and with confidence limits overlapping.The agricultural practice (mono-vs polyculture) showed some influence on the biomass of each plant species. When considering total productivity, for aerial and root biomass, it was higher in control comparatively to salinization conditions. Under salinization stress, the practice of polyculture was associated with a higher aerial and root total biomass than monocultures (for instance with combinations with T. pratense and F. arundinacea).Results suggest that the effects of salinity stress on total productivity may be minimized under agricultural practices of polyculture. Thus, this type of cultures should be encouraged in low-lying coastal ecosystems that are predicted to suffer from salinization caused by seawater intrusions.

Simulation model is very essential for predicting the environmental fate and the potential environmental consequences of chemical pollutants including those from accidental chemical spills. However very few of such simulation model is seen related to Chinese costal water body. As the first step toward our final goal to develop a simulation model for the prediction and the risk assessment of chemical pollutants in Chinese coastal water, this study developed a three-dimensional (3D) hydrodynamic model of Xiamen Bay (XMB). This hydrodynamic model was externally derived by meteorological data, river discharge and boundary conditions of XMB. We used the model to calculate the physical factors, especially water temperature, salinity and flow field, from June to September 2016 in XMB. The results demonstrated a good match between observations and simulations, which underscores the feasibility of this model in predicting the spatial-temporal concentration of chemical pollutants in the coastal water of XMB. Longitudinal salinity distributions and the mixing profile of river-sea interactions are discussed, including the obvious gradation of salinity from the river towards sea sites shown by the model. We further assumed that 1000 kg and 1000 mg/L of a virtual chemical pollutant leaked out from Jiulong River (JR) estuary (point source) and whole XMB (non-point source), respectively. The model illustrates that it takes three months for XMB to become purified when point source pollution occurs in the estuary, while half a year to be required in the case of non-point source pollution across the entire bay. Moreover, the model indicated that pollutants can easily accumulate in the western coastal zone and narrow waters like Maluan Bay, which can guide environmental protection strategies.

Silver (Ag) is released from a range of products and accumulates in agricultural soils as silver sulfide (Ag₂S) through the application of Ag-containing biosolids as a soil amendment. Although Ag₂S is comparatively stable, its solubility increases with salinity, potentially altering its impacts on microbial communities due to the anti-microbial properties of Ag. In this study, we investigated the impacts of Ag on the microbially mediated N cycle in saline soils by examining the relationship between the (bio)availability of Ag₂S and microbial functioning following the application of Ag₂S-containing sludge. Synchrotron-based X-ray absorption spectroscopy (XAS) revealed that the Ag₂S was stable within the soil, although extractable Ag concentrations increased up to 18-fold in soils with higher salinity. However, the extractable Ag accounted for <0.05% of the total Ag in all soils and had no impact on plant biomass or soil bacterial biomass. Interestingly, at high soil salinity, Ag₂S significantly increased cumulative N₂O emissions from 80.9 to 229.2 mg kg⁻¹ dry soil (by 180%) compared to the corresponding control sludge treatment, which was ascribed to the increased abundance of nitrification and denitrification-related genes (amoA, nxrB, narG, napA, nirS, and nosZ) and increased relative abundance of denitrifiers (Rhodanobacter, Salinimicrobium, and Zunongwangia). Together, our findings show that the application of Ag₂S-containing sludge to a saline soil can disrupt the N cycle and increase N₂O emissions from agroecosystems.

Soil salinity is a global threat to the environmental sustainability, in particular to the developing countries due to their limited resources for soil reclamation. In a greenhouse pot experiment, Pennisetum giganteum, was investigated for its tolerance to salt stress and simultaneous phytoremediation capability. 4 weeks post-germination, NaCl (10, 50, 150, 250, 350, 450 and 550 mM) and tap water (control) was applied after every 2 consecutive days for two weeks in a completely randomized design and their effects were established in the growth and physico-chemical aspects of these plants. Our results indicated that P. giganteum withstood high salt stress (with 550 mM NaCl tolerance threshold level). Interestingly, the plants grown under saline conditions had higher biomass yield when compared to the control. Furthermore, the antioxidant activity and proline content of plants under saline conditions were significantly (p < 0.05) higher than those of control plants, indicating their adaptability to high salt stress. Biochemical analysis such as chlorophyll contents, total soluble sugar, total phenol and protein contents revealed considerable differences between plants grown under higher NaCl stress compared to the control conditions. Additionally, significantly different ionic flux along with high K⁺/Na⁺ ratio was observed in plants grown under a range of saline conditions. The results obtained are therefore of value to indicate P. giganteum an eco-friendly alternate source for the phytoremediation of saline soils and may be used as base for future research on this plant. Effective strategies need to be adopted with this plant to reclaim saline-degraded as well as marginal soils.

A biofouling resistant passive sampler for ammonia, where the semi-permeable barrier is a microporous hydrophobic gas-diffusion membrane, has been developed for the first time and successfully applied to determine the time-weighted average concentration of ammonia in estuarine and coastal waters for 7 days. Strategies to control biofouling of the membrane were investigated by covering it with either a copper mesh or a silver nanoparticle functionalised cotton mesh, with the former approach showing better performance. The effects of temperature, pH and salinity on the accumulation of ammonia in the newly developed passive sampler were studied and the first two parameters were found to influence it significantly. A universal calibration model for the passive sampler was developed using the Group Method Data Handling algorithm based on seawater samples spiked with known concentrations of total ammonia under conditions ranging from 10 to 30 °C, pH 7.8 to 8.2 and salinity 20 to 35. The newly developed passive sampler is affordable, user-friendly, reusable, sensitive, and can be used to detect concentrations lower than the recently proposed guideline value of 160 μg total NH₃–N L⁻¹, for a 99% species protection level, with the lowest concentration measured at 17 nM molecular NH₃ (i.e., 8 μg total NH₃–N L⁻¹ at pH 8.0 and 20 °C). It was deployed at four field sites in the coastal waters of Nerm (Port Phillip Bay), Victoria, Australia. Good agreement was found between molecular ammonia concentrations obtained with passive and discrete grab sampling methods (relative difference, - 12% to - 19%).

Microplastics have attracted much attention in recent years because they are able to interact with other pollutants including pesticides, with implications for the potential risks to biota. However, the sorption behavior of pesticides on microplastics, especially on biodegradable microplastics which are promising alternatives to conventional polymers, has been insufficiently studied. In this study, triadimefon and difenoconazole were selected as model triazole fungicides, and their sorption behavior on a typical biodegradable microplastics (PBS: polybutylene succinate) and two conventional polyethylene (PE) and polyvinyl chloride (PVC) microplastics was investigated with batch experiments in an aqueous solution. PBS presented the highest sorption capacity for triadimefon (104.2 ± 4.8 μg g⁻¹) and difenoconazole (192.8 ± 2.3 μg g⁻¹), which was 1.8- and 1.3-fold that on PE and 4.4- and 7.4-fold that of PVC, respectively. The results of sorption kinetic and isotherm modeling were better fit by a pseudo-second order model and linear model, respectively. More importantly, the effects of environmental factors (pH, salinity and dissolved organic matter) on the sorption behavior were investigated. Fungicide sorption on PBS was generally not affected by salinity, pH or dissolved organic matter. However, in contrast, salinity and dissolved organic matter both significantly decreased sorption on PE and PVC. The results showed that not only the sorption capacities of biodegradable microplastics but also their responses to environmental factors are quite different from those of conventional microplastics. This finding highlights the importance of the role played by biodegradable microplastics in the accumulation and transportation of organic pollutants.

Marine oil spill often causes contamination of drinking water sources in coastal areas. As the use of oil dispersants has become one of the main practices in remediation of oil spill, the effect of oil dispersants on the treatment effectiveness remains unexplored. Specifically, little is known on the removal of dispersed oil from contaminated water using conventional adsorbents. This study investigated sorption behavior of three prototype activated charcoals (ACs) of different particle sizes (4–12, 12–20 and 100 mesh) for removal of dispersed oil hydrocarbons, and effects of two model oil dispersants (Corexit EC9500A and Corexit EC9527A). The oil content was measured as n-alkanes, polycyclic aromatic hydrocarbons (PAHs), and total petroleum hydrocarbons (TPHs). Characterization results showed that the smallest AC (PAC100) offered the highest BET surface area of 889 m2/g and pore volume of 0.95 cm3/g (pHPZC = 6.1). Sorption kinetic data revealed that all three ACs can efficiently adsorb Corexit EC9500A and oil dispersed by the two dispersants (DWAO-I and DWAO-II), and the adsorption capacity followed the trend: PAC100 > GAC12 × 20 > GAC4 × 12. Sorption isotherms confirmed PAC100 showed the highest adsorption capacity for dispersed oil in DWAO-I with a Freundlich KF value of 10.90 mg/g∙(L/mg)1/n (n = 1.38). Furthermore, the presence of Corexit EC9500A showed two contrasting effects on the oil sorption, i.e., adsolubilization and solubilization depending on the dispersant concentration. Increasing solution pH from 6.0 to 9.0 and salinity from 2 to 8 wt% showed only modest effect on the sorption. The results are useful for effective treatment of dispersed oil in contaminated water and for understanding roles of oil dispersants.