One possible way to reduce the environmental impacts of pesticides is by nanostructuring biocides in nanocarriers because this promotes high and localized biocidal activity and can avoid toxicity to non-target organisms. Neem oil (NO) is a natural pesticide with toxicity concerns to plants, fish, and other organisms. Thus, loading NO in a safe nanocarrier can contribute to minimizing its toxicity. For this study, we have characterized the integrity of a nanosilica-neem oil-based biocide delivery system (SiO₂NP#NO BDS) and evaluated its effectiveness in reducing NO toxicity by the Allium cepa test. NO, mainly consisted of unsaturated fatty acids, was well binded to the SiO₂NP with BTCA crosslinker. Overall, this material presented all of its pores filled with the NO with fatty acid groups at both the surface and bulk level of the nanoparticle. The thermal stability of NO was enhanced after synthesis, and the NO was released as zero-order model with a total of 20 days without burst release. The SiO₂NP#NO BDS was effective in reducing the individual toxicity of NO to the plant system. NO in single form inhibited the seed germination of A. cepa (EC₅₀ of 0.38 g L⁻¹), and the effect was no longer observed at the BDS condition. Contrarily to the literature, the tested NO did not present cyto- and geno-toxic effects in A. cepa, which may relate to the concentration level and composition.

Plastic residues have become a serious environmental problem in areas where agricultural plastic film are used intensively. Although numerous of studies have been done to assess its impacts on soil quality and crop yields, the understanding of meso-plastic particles effects on plant is still limited. In this study, low density polyethylene (PE) and biodegradable plastic (Bio) mulch film were selected to study the effects of meso-plastic debris on soybean germination and plant growth with the accumulation levels of 0%, 0.1%, 0.5% and 1% in soil (w: w, size ranging 0.5–2 cm) by a pot experiment under field condition. Results showed that the germination viability of soybean seeds was reduced to 82.39%, 39.44% and 26.06% in the treatments with 0.1%, 0.5% and 1% added plastic debris compared to the control (CK), respectively, suggesting that plastic residues in soil inhibit the viability of soybean seed germination. The plastic debris had a significant negative effect on plant height and culm diameter during the entire growth stage of soybean. Similarly, the leaf area at harvest was reduced by 1.97%, 6.86% and 11.53% compared to the CK in the treatments with 0.1%, 0.5% and 1% plastic debris addition, respectively. In addition, the total plant biomass under plastic addition was reduced in both the flowering and harvesting stages, compared to the CK. For the different type of plastic residues, plant height, leaf area and root/shoot ratio at group PE were significantly lower than those of groups treated by Bio. In conclusion, PE debris had a greater negative effects on plant height, culm diameter, leaf area and root/shoot ratio while Bio debris mainly showed the adverse effects on germination viability and root biomass especially at the flowering stage. Therefore, further research is required to elaborate plastic particles’ effects on different stages of crops and soil quality.

Sea level rise induced-salinization is lowering coastal soils productivity. In order to assess the effects that increased salinity may provoke in terrestrial plants, using as model species: Trifolium pratense, Lolium perenne, Festuca arundinacea and Vicia sativa, two specific objectives were targeted: i) to determine the sensitivity of the selected plant species to increased salinity (induced by seawater-SW or by NaCl, proposed as a surrogate of SW) and, ii) to assess the influence of salinization in total biomass under different agricultural practices (mono- or polycultures).The four plant species exhibited a higher sensitivity to NaCl than to SW. Festuca arundinacea was the most tolerant species to NaCl (EC₅₀,ₛₑₑd gₑᵣₘᵢₙₐₜᵢₒₙ and EC₅₀,gᵣₒwₜₕ of 18.6 and 10.5 mScm⁻¹, respectively). The other three species presented effective conductivities in the same order of magnitude and, in general, with 95% confidence limits overlapping. Soil moistened with SW caused no significant adverse effects on seed germination and growth of L. perenne. Similar to NaCl, the other three species, in general, presented a similar sensitivity to SW exposure with EC₅₀,ₛₑₑd gₑᵣₘᵢₙₐₜᵢₒₙ and EC₅₀,gᵣₒwₜₕ within the same order of magnitude and with confidence limits overlapping.The agricultural practice (mono-vs polyculture) showed some influence on the biomass of each plant species. When considering total productivity, for aerial and root biomass, it was higher in control comparatively to salinization conditions. Under salinization stress, the practice of polyculture was associated with a higher aerial and root total biomass than monocultures (for instance with combinations with T. pratense and F. arundinacea).Results suggest that the effects of salinity stress on total productivity may be minimized under agricultural practices of polyculture. Thus, this type of cultures should be encouraged in low-lying coastal ecosystems that are predicted to suffer from salinization caused by seawater intrusions.

The potential impact of six antibiotics (chlortetracycline, tetracycline and tylosin; sulfamethoxazole, sulfamethazine and trimethoprim) on plant growth and soil quality was studied by using seed germination test on filter paper and plant growth test in soil, soil respiration and phosphatase activity tests. The phytotoxic effects varied between the antibiotics and between plant species (sweet oat, rice and cucumber). Rice was most sensitive to sulfamethoxazole with the EC10 value of 0.1 mg/L. The antibiotics tested inhibited soil phosphatase activity during the 22 days' incubation. Significant effects on soil respiration were found for the two sulfonamides (sulfamethoxazole and sulfamethazine) and trimethoprim, whereas little effects were observed for the two tetracyclines and tylosin. The effective concentrations (EC10 values) for soil respiration in the first 2 days were 7 mg/kg for sulfamethoxazole, 13 mg/kg for sulfamethazine and 20 mg/kg for trimethoprim. Antibiotic residues in manure and soils may affect soil microbial and enzyme activities. Terrestrial ecotoxicological effects of antibiotics are related to their sorption and degradation behavior in soil.

The increasing use of rare earth elements (REEs) in various industries has led to a rise in discharge points, thus increasing discharge rates, circulation, and human exposure. Therefore, REEs have received widespread attention as important emerging pollutants. This article thus summarizes and discusses the distribution and occurrence of REEs in the world's soil and water, and briefly introduces current REEs content analysis technology for the examination of different types of samples. Specifically, this review focuses on the impact of REEs on plants, including the distribution and fractionation of REEs in plants and their bioavailability, the effect of REEs on seed germination and growth, the role of REEs in plant resistance, the physiological and biochemical responses of plants in the presence of REEs, including mineral absorption and photosynthesis, as well as a description of the substitution mechanism of REEs competing for Ca in plant cells. Additionally, this article summarizes the potential mechanisms of REEs to activate endocytosis in plants and provides some insights into the mechanisms by which REEs affect endocytosis from a cell and molecular biology perspective. Finally, this article discusses future research prospects and summarizes current scientific findings that could serve as a basis for the development of more sustainable rare earth resource utilization strategies and the assessment of REEs in the environment.

Biofilm-mediated bioremediation of xenobiotic pollutants is an environmental friendly biological technique. In this study, 36 out of 55 bacterial isolates developed biofilms in glass test tubes containing salt-optimized broth plus 2% glycerol (SOBG). Scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, and Congo red- and Calcofluor binding results showed biofilm matrices contain proteins, curli, nanocellulose-rich polysaccharides, nucleic acids, lipids, and peptidoglycans. Several functional groups including –OH, N–H, C–H, CO, COO⁻, –NH₂, PO, C–O, and C–C were also predicted. By sequencing, ten novel biofilm-producing bacteria (BPB) were identified, including Exiguobacterium indicum ES31G, Kurthia gibsonii ES43G, Kluyvera cryocrescens ES45G, Cedecea lapagei ES48G, Enterobacter wuhouensis ES49G, Aeromonas caviae ES50G, Lysinibacillus sphaericus ES51G, Acinetobacter haemolyticus ES52G, Enterobacter soli ES53G, and Comamonas aquatica ES54G. The Direct Red (DR) 28 (a carcinogenic and mutagenic dye used in dyeing and biomedical processes) decolorization process was optimized in selected bacterial isolates. Under optimum conditions (SOBG medium, 75 mg L⁻¹ dye, pH 7, 28 °C, microaerophilic condition and within 72 h of incubation), five of the bacteria tested could decolorize 97.8% ± 0.56–99.7% ± 0.45 of DR 28 dye. Azoreductase and laccase enzymes responsible for biodegradation were produced under the optimum condition. UV–Vis spectral analysis revealed that the azo (−NN−) bond peak at 476 nm had almost disappeared in all of the decolorized samples. FTIR data revealed that the foremost characteristic peaks had either partly or entirely vanished or were malformed or stretched. The chemical oxygen demand decreased by 83.3–91.3% in the decolorized samples, while plant probiotic bacterial growth was indistinguishable in the biodegraded metabolites and the original dye. Furthermore, seed germination (%) was higher in the biodegraded metabolites than the parent dye. Thus, examined BPB could provide potential solutions for the bioremediation of industrial dyes in wastewater.

This study evaluated the chronic toxicity (30 days) of different sizes of polyethylene terephthalate (PET) microplastics (60–3000 μm) provided alone or in combination with acid rain, on garden cress (Lepidium sativum). Both biometrical and physiological traits have been evaluated: i) percentage inhibition of seed germination, plant height, leaf number and fresh biomass production; ii) oxidative stress responses (hydrogen peroxide; ascorbic acid and glutathione production); iii) impairment in photosynthetic machinery in term of pigments production; iv) aminolevulinic acid and proline production. Results highlighted that different sizes of PET, alone or in combination with acid rain, are able to negatively affect both biometrical and physiological plant traits. In particular, the lower size of microplastics is able to negatively affect growth and development, as well as to trigger the oxidative burst. Regarding the pigments production, PET coupled with acid rain, induced a higher production of Chl-b, and an inhibition of aminolevulinic acid.

Studies in the literature concern the toxicity of nanoparticles either in a Petri dish or in agar media-based tests. Therefore, for environmental relevance, individual and binary mixtures of metal oxide nanoparticles (M-NPs) cadmium oxide (CdO-NP) and copper oxide (CuO-NP) were tested in this study for their effect on Vigna radiata in soil with and without the addition of sawdust. Seed germination was 67% in 100 mg CuO-NP in soil without sawdust. Seeds failed to germinate in 100 mg CdO +100 mg CuO-NPs in soil without the addition of sawdust and germination was 83% at the same concentration in soil with sawdust. In sawdust added to soil, when compared with control (soil without M-NPs), the maximum reduction in shoot (82%) and root (80%) length and wet (61%) and dry (54%) weight of plant was recorded in CdO-NP treated soil. Similarly, compared with control (soil without sawdust and M-NPs), the percent reduction in shoot (61%) and root (70%) length and wet (44%) and dry (48%) weight was highest in CdO-NP treated soil not supplemented with sawdust. In a binary mixture test (CdO-NP + CuO-NP), the addition of sawdust promoted the above plant growth parameters compared with individual CdO-NP and CuO-NP tests. Cadmium (511 mg kg⁻¹ for individual and 303 mg kg⁻¹ for binary mixture tests) and Cu (953 mg kg⁻¹ for individual and 2954 mg kg⁻¹ for binary mixture tests) accumulation was higher in plants grown in soil without sawdust. The beneficial effect of sawdust addition was observed in seed germination, plant growth, and metal accumulation. With or without sawdust, the binary mixture of CdO and CuO was antagonistic. These results indicate that sawdust can prevent M-NP-induced toxicity and reduce metal accumulation in plant tissues.

Surface modified lipopeptide biosurfactant (BS) with enhancement of amino acids was produced using Bacillus Malacitensis. The aromatic hydrocarbons from contaminated soil were removed by BS soil washing process and bioremediation using activated functionalized carbon-BS matrix (AFC-BS). The Central Composite Design (CCD) showed the optimum time100 h; pH 7; temperature 30°C on maximum yield of BS. The amino acid profiling of BS reveals the enhancement of amino acids especially polar amino acids and its importance in the formation of micellar structure for the tight packing of aromatic hydrocarbons from industrial contaminated soil. AFC-BS matrix was implanted directly into the contaminated soil for 28 days and found 61.80 % of Total Petroleum Hydrocarbon (TPH) removal efficiency which is high compared to the AFC treated soil. The compounds were extracted from contaminated soil and AFC-BS matrix, found similar peaks in high performance liquid chromatography, which reveals the ability of BS to remove aromatic contaminants. The soil toxicity was also analyzed by seed germination and found improvement in the growth of seeds. The germination of seeds increased from 60 % to 100 % and the phytotoxicity of root and shoot was reduced from 89.50 %, 88.45 % to12.55 %, 11.87 % respectively.

Understanding the distribution and persistence of the fumigant dimethyl disulfide (DMDS) under different soil conditions would contribute to a more environmentally sustainable use of this gas. We determined the effects of soil type, soil moisture content and soil organic amendment rate on DMDS distribution and persistency using soil columns in the laboratory. The peak concentrations of DMDS at 60 cm soil depth in sandy loam soil, black soil and red loam soil were 1.9 μg cm⁻³, 0.77 μg cm⁻³, 0.22 μg cm⁻³, respectively. The total soil residues of DMDS in sandy loam soil, black soil and red loam soil were 0.4, 1.3 and 1.3%, respectively. The peak concentrations of DMDS at 60 cm soil depth and the total soil residues of DMDS applied decreased from 3.2 μg cm⁻³ to 0.9 μg cm⁻³ and 3.3 to 0.5% when soil moisture content increased from 6 to 18%, respectively. Incremental increases (0–5%) in organic amendment rates decreased DMDS distribution through the soils and increased soil residues. Wait periods were required of 7, 21 and 21 days after polyethylene (PE) film was removed to reduce residues sufficiently for cucumber seed germination in sandy loam soil, black soil and red loam soil with 12% moisture content and 0% organic amendment rate, respectively. However, no wait period was required for successful cucumber seed germination in sandy loam soils (Beijing) with 6, 12 or 18% moisture content or organic amendment rates of 1 or 5%, respectively, but in commercial practice 7 days delay would be prudent. Our results indicated that soil type, soil moisture content and organic amendment rates significantly affected DMDS distribution, persistency and residues in soil. Those factors should be taken into consideration by farmers when determining the appropriate dose of DMDS that will control soil pests and diseases in commercially-produced crops.