The article presents the results of a study of heavy metals in snow and groundwater within the industrially developed Arkhangelsk agglomeration, which is the largest among urban formations in the Arctic zone of Russia. This article describes the results of research on the territories of three suburban community garden plots used by residents of the cities of the Arkhangelsk, Severodvinsk and Novodvinsk agglomeration for recreation, growing fruits and vegetables, picking wild berries and mushrooms, and short-term residence. In groundwater samples taken from wells, the average concentrations of heavy metals decrease in the following order: Fe > Mn > Zn > Cr > Ni > Cu > Ti > V > Pb > U > As > Co > Mo > Sb > Cd. A comparison of metal concentrations in groundwater with WHO and SanPiN standards showed that only Fe and Mn exceeded the permissible limits, for the rest of the studied metals, the concentrations were significantly below the permissible limits. The study of heavy metals in the snow showed a similar order of decrease in concentrations to groundwater and total concentrations of soluble metal fractions. This fact indicates the migration of heavy metals into groundwater after the spring snowmelt and the fact the main source of groundwater pollution is the atmospheric channel. According to the values of the total areal pollution of the snow cover with heavy metals, the most polluted are suburban garden plots in the area of the Arkhangelsk city – 216.91 mg/m2. The results of the principal component analysis showed that the main sources of snow cover pollution with heavy metals in the suburban areas of the Arkhangelsk agglomeration were thermal power plants, machine-building and metallurgical plants, a solid waste landfill, and vehicles. The calculation of the heavy metal pollution index for water did not reveal a significant anthropogenic impact. However, the indices assessing the amount of metals (heavy metal evaluation index), toxicity (heavy metal toxicity load), non-carcinogenic risk (hazard index), and carcinogenic risk indicate a high level of heavy metal pollution of the studied waters, as well as the unsuitability of groundwater and melted snow as drinking water. Metals such as Fe, Mn, Ni, Cu, and Pb make the greatest contribution to the quality indices of the studied waters.

Investigating the migration and transformation of carbonaceous and nitrogenous matter in the cryosphere areas is crucial for understanding global biogeochemical cycle and earth's climate system. However, water-soluble organic constituents and their transformation in multiple water bodies are barely investigated. Water-soluble organic carbon (WSOC) and organic nitrogen (WSON), and particulate black carbon (PBC) in multiple types of water bodies in eastern Tibetan Plateau (TP) cryosphere for the first time have been systematically investigated. Statistical results exhibited that from south to north and from east to west of this region, WSOC concentrations in alpine river runoff were gradually elevated. WSOC and nitrogenous matter in the alpine river runoff and precipitation in the glacier region presented distinct seasonal variations. WSON was the dominant component (63.4%) of water-soluble total nitrogen in precipitation over high-altitude southeastern TP cryosphere. Water-soluble carbonaceous matter dominated the carbon cycle in the TP cryosphere, but particulate carbonaceous matter in the alpine river runoff had a small fraction of the cryospheric carbon cycle. Analysis of optical properties illustrated that PBC had a much stronger light absorption ability (MAC-PBC: 2.28 ± 0.37 m² g⁻¹) than WSOC in the alpine river runoff (0.41 ± 0.26 m² g⁻¹). Ionic composition was dominated by SO₄²⁻, NO₃⁻, and NH₄⁺ (average: 45.13 ± 3.75%) in the snow of glaciers, implying important contribution of (fossil fuel) combustion sources over this region. The results of this study have essential implications for understanding the carbon and nitrogen cycles in high altitude cryosphere regions of the world. Future work should be performed based on more robust in-situ observations and measurements from multiple environmental medium over the cryosphere areas, to ensure ecological protection and high-quality development of the high mountain Asia.

Persistent organic pollutants (POPs) are pervasive and a significant threat to the environment worldwide. Yet, reports of POP levels in Antarctic seabirds based on blood are scarce, resulting in significant geographical gaps. Blood concentrations offer a snapshot of contamination within live populations, and have been used widely for Arctic and Northern Hemisphere seabird species but less so in Antarctica. This paper presents levels of legacy POPs (polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs)) and novel brominated flame retardants (NBFRs) in the blood of five Antarctic seabird species breeding within Prydz Bay, East Antarctica. Legacy PCBs and OCPs were detected in all species sampled, with Adélie penguins showing comparatively high ∑PCB levels (61.1 ± 87.6 ng/g wet weight (ww)) compared to the four species of flying seabirds except the snow petrel (22.5 ± 15.5 ng/g ww), highlighting that legacy POPs are still present within Antarctic wildlife despite decades-long bans. Both PBDEs and NBFRs were detected in trace levels for all species and hexabromobenzene (HBB) was quantified in cape petrels (0.3 ± 0.2 ng/g ww) and snow petrels (0.2 ± 0.1 ng/g ww), comparable to concentrations found in Arctic seabirds. These results fill a significant data gap within the Antarctic region for POPs studies, representing a crucial step forward assessing the fate and impact of legacy POPs contamination in the Antarctic environment.

Plastic materials are increasingly produced worldwide with a total estimated production of >8300 million tonnes to date, of which 60% was discarded. In the environment, plastics fragment into smaller particles, e.g. microplastics (size < 5 mm), and further weathering leads to the formation of functionally different contaminants – nanoplastics (size <1 μm). Nanoplastics are believed to have entirely different physical (e.g. transport), chemical (e.g. functional groups at the surface) and biological (passing the cell membrane, toxicity) properties compared to the micro- and macroplastics, yet, their measurement in the environmental samples is seldom available. Here, we present measurements of nanoplastics mass concentration and calculated the deposition at the pristine high-altitude Alpine Sonnblick observatory (3106 MASL), during the 1.5 month campaigh in late winter 2017. The average nanoplastics concentration was 46.5 ng/mL of melted surface snow. The main polymer types of nanoplastics observed for this site were polypropylene (PP) and polyethylene terephthalate (PET). We measured significantly higher concentrations in the dry sampling periods for PET (p < 0.002) but not for PP, which indicates that dry deposition may be the preferential pathway for PET leading to a gradual accumulation on the snow surfaces during dry periods. Air transport modelling indicates regional and long-range transport of nanoplastics, originating preferentially from European urban areas. The mean deposition rate was 42 (+32/-25) kg km⁻² year⁻¹. Thus more than 2 × 10¹¹ nanoplastics particles are deposited per square meter of surface snow each week of the observed period, even at this remote location, which raises significant toxicological concerns.

Antarctic trace element records could provide important insights into the impact of human activities on the environment over the past few centuries. In this study, we investigated the atmospheric concentrations of 14 representative heavy metals (Al, As, Cd, Co, Cu, Fe, K, Mg, Mn, Pb, Sb, Sr, Tl and V) from 174 samples collected in a 4-m snow pit at Dome Argus (Dome A) on the East Antarctic Plateau, covering the period from 1950 to 2016 A.D. We found great variability in the annual concentration of all metals. The crustal enrichment factors suggest that the concentrations of some heavy metals (Cd, Sb, Cu, As and Pb) were likely influenced by anthropogenic activities in recent decades. An analysis of source regions suggests that heavy metal pollution at Dome A was largely caused by human activities in Australia and South America (e.g. mining production, leaded gasoline). Based on the relationship between the trace elements fluxes and sea ice concentration (SIC), sea surface temperature (SST) and annual mean air temperature at 2 m above the ground (T₂ₘ), our analysis shows that deposition and transport of atmospheric aerosol at Dome A were influenced by circum-Antarctic atmospheric circulations.

The deposition of light absorbing impurities (LAIs) (e.g., black carbon (BC), organic carbon (OC), mineral dust (MD)) on snow is an important attribution to accelerate snowmelt across the northern Xinjiang, China. At present, there is still a lack of understanding of the LAIs concentration, elution and enrichment process in snow cover over Xinjiang. Based on these, continuously sampling during two years carried out to investigate the concentrations, impacts and potential sources of LAIs in snow at Kuwei Station in the southern Altai Mountains. The average concentrations of BC, OC and MD in the surface snow were 2787 ± 2334 ng g⁻¹, 6130 ± 6127 ng g⁻¹, and 70.03 ± 62.59 μg g⁻¹, respectively, which dramatically increased along with snowmelt intensified, reflecting a significant enrichment process of LAIs at the snow surface. Besides, high LAIs concentrations also found in the subsurface and melting layers of the snowpit, reflecting the elution and redistribution of LAIs. With the simulation of the SNow ICe Aerosol Radiative model, BC was the main dominant factor in reducing snow albedo and radiative forcing (RF), its impact was more remarkable in the snowmelt period. The average contribution rates of BC, MD and BC + MD to snow albedo reduction increased by 20.0 ± 1.9%, 13.0 ± 0.2%, and 20.5 ± 2.3% in spring compared with that in winter; meanwhile, the corresponding average RFs increased by 15.8 ± 3.4 W m⁻², 4.7 ± 0.3 W m⁻² and 16.4 ± 3.2 W m⁻², respectively. Changes in the number of snowmelt days caused by BC and MD decreased by 3.0 ± 0.4 d to 8.3 ± 1.3 d. It indicated that surface enrichment of LAIs during snow melting might accelerate snowmelt further. Weather Research and Forecasting Chemistry model showed that the resident emission was the main potential source of BC and OC in snow. This implied that the mitigation of intensive snowmelt needs to mainly reduce resident emission of LAIs in the future.

A wide variety of sampling techniques and strategies are needed to analyze polycyclic aromatic compounds (PACs) and interpret their distributions in various environmental media (i.e., air, water, snow, soils, sediments, peat and biological material). In this review, we provide a summary of commonly employed sampling methods and strategies, as well as a discussion of routine and innovative approaches used to quantify and characterize PACs in frequently targeted environmental samples, with specific examples and applications in Canadian investigations. The pros and cons of different analytical techniques, including gas chromatography – flame ionization detection (GC-FID), GC low-resolution mass spectrometry (GC-LRMS), high performance liquid chromatography (HPLC) with ultraviolet, fluorescence or MS detection, GC high-resolution MS (GC-HRMS) and compound-specific stable (δ¹³C, δ²H) and radiocarbon (Δ¹⁴C) isotope analysis are considered. Using as an example research carried out in Canada’s Athabasca oil sands region (AOSR), where alkylated polycyclic aromatic hydrocarbons and sulfur-containing dibenzothiophenes are frequently targeted, the need to move beyond the standard list of sixteen EPA priority PAHs and for adoption of an AOSR bitumen PAC reference standard are highlighted.

Studies of the chemical composition of atmospheric aerosols, rain water and snow in various regions of the globe quite often show the presence of pyridine and a number of its low mass derivatives. Nevertheless, the sources of those compounds in the environment have not yet been established and definitely require elucidation, supported by reliable experimental results. In the present work the chemical composition of peat combustion products as one of the important sources of atmospheric aerosol emission is studied by two-dimensional gas chromatography – high-resolution mass spectrometry with a focus on the detection of pyridine derivatives. Twenty-five compounds of this class were reliably identified and quantified in laboratory experiments on peat burning. Among them 3-hydroxypyridine predominates, while the rest analytes are mostly represented by alkyl derivatives: pyridine, 2-methylpyridine, 3-methylpyridine, 2,5-dimethylpyridine, 2,6-dimethylpyridine, 2-ethylpyridine, lutidines (in order of decreasing concentration). The distribution of these combustion products coincides with that obtained earlier in environmental studies carried out in Arctic, Central Russia and France. The experiments on peat thermal decomposition by pyrolysis GC-MS demonstrated that the maximum concentrations as well as the number of detected analytes were found under conditions of oxygen lack and a temperature of about 500 °C, i.e. characteristic conditions of peat wildfires. The observed levels of pyridines’ emission recalculated on the peat dry weight exceeded 200 mg kg⁻¹. Considering hundreds of millions tons of peat burning in megafires over 20,000 tons of pyridines penetrate the Earth atmosphere annually. The obtained results allow concluding that peat burning may be the major and still underestimated source of pyridine and lower alkylpyridines in the Earth atmosphere.

Cadmium (Cd) and its forms has recently been a focus of attention due to its toxic effects on human health and the environment. We evaluated the atmospheric deposition of Cd during three consecutive winter seasons (2009–2011) at 10 mountain-top locations in the Czech Republic along the borders with Poland, Germany, Austria and Slovakia. Cadmium concentrations of soluble and insoluble forms in both horizontal (rime) and vertical (snow) deposition were determined using sector-field ICP-MS. Across the sites, 94% of the total winter Cd deposition occurred in the soluble (environmentally available) Cd form. Mean concentrations of soluble Cd in rime were six times higher than in snow (398 vs. 66 ng L⁻¹). Vertical deposition contributed as much as 41% to the total winter Cd input. Between-site variability in Cd deposition was large, ranging between 13 and 108 μg m⁻² winter⁻¹. Overall, Cd concentrations in winter deposition did not reach the drinking water limits and did not pose a direct threat for human health. Long-term trends (1996–2017) in winter Cd deposition were evaluated at six GEOMON sites (a monitoring network of small forested catchments). Since 1996, Cd input in winter atmospheric deposition decreased by 73–93%. Simultaneously, we found declines in between-site variability in winter Cd inputs. The highest recent winter Cd inputs were found at sites located in the northeast of the country. A north-south pollution gradient, which has frequently been mentioned in the literature, was not observed, with both northwestern sites and southern sites being among those with the lowest Cd pollution. Backward trajectories of the HYSPLIT model for fresh snow samples identified Poland and Germany as major transboundary Cd pollution sources for the Czech Republic.

The Athabasca Oil Sands Region (AOSR) in Alberta, Canada, is an important source of atmospheric pollutants, such as aerosols, that have repercussions on both the climate and human health. We show that the mean freezing temperature of snow-borne particles from AOSR was elevated (−7.1 ± 1.8 °C), higher than mineral dust which freezes at ∼ −15 °C and is recognized as one of the most relevant ice nuclei globally. Ice nucleation of nanosized snow samples indicated an elevated freezing ability (−11.6 ± 2.0 °C), which was statistically much higher than snow-borne particles from downtown Montreal. AOSR snow had a higher concentration (∼2 orders of magnitude) of >100 nm particles than Montreal. Triple quadrupole ICP-(QQQ)-MS/MS analysis of AOSR and Montreal snow demonstrated that most concentrations of metals, including those identified as emerging nanoparticulate contaminants, were much more elevated in AOSR in contrast to Montreal: 34.1, 34.1, 16.6, 5.8, 0.3, 0.1, and 9.4 mg/m³ for Cr, Ni, Cu, As, Se, Cd, and Pb respectively, in AOSR and 1.3, 0.3, 2.0, <0.03, 0.1, 0.03, and 1.2 mg/m³ in Montreal snow. High-resolution Scanning Transmission Electron Microscopy/Energy-dispersive X-ray Spectroscopy (STEM-EDS) imaging provided evidence for various anthropogenic nano-materials, including carbon nanotubes resembling structures, in AOSR snow up to 7–25 km away from major oil sands upgrading facilities. In summary, particles characterized as coming from oil sands are more efficient at ice nucleation. We discuss the potential impacts of AOSR emissions on atmospheric and microphysical processes (ice nucleation and precipitation) both locally and regionally.