Excessive nitrogen (N) losses from food production and consumption have resulted in noticeable environmental impacts, e.g., air pollution and climate change, saturation of soil N, and water eutrophication. In the present study, a rural-scale N flow model was constructed in Quzhou county, Hebei province to investigate the characteristics of the N flux, N use efficiency (NUE), and N loss and their driving factors in the food production and consumption system during 1997–2017. Our results show that the N fluxes of the crop-production subsystem (CPS), the livestock-breeding subsystem (LBS), and the household-consumption subsystem (HCS) all followed an upward trend. During 1997–2017, the N losses from the system were high (51.38%), and the CPS was a major source. When the N fertilizer application level was optimal (403–475 kg N ha⁻¹), the NUE in the CPS (NUEc) decreased sharply, resulting in a higher N cost than that observed at larger scales. For the LBS, the NUE of animal feed (NUEa) was high (46.37%); however, the waste utilization rate of the HCS was below 30%. The chemical fertilizer application level, feed input, animal-food demand, and livestock manure application level were closely related to the environmental N losses. Due to the lack of reasonable N treatment and utilization methods, the increasing N losses are expected to have a large future impact on environmental issues such as haze, soil acidification, and frequent algal blooms. Therefore, adjusting N management in the processes of food production and consumption is of great significance to the improvement of global NUE and reduction of environmental pollution.

The development of antibiotic resistance and dissemination of its determinants is an emerging public health problem as it compromises treatment options of infections that were, until recently, treatable. Investigation of outbreaks of vancomycin resistant enterococci (VRE) suggests that the environment serves as a significant reservoir for antibiotic resistance genes (ARGs). However, there is a paucity of data regarding the presence of ARGs in the water sources in South Africa. In this study, water samples collected from wastewater treatment plants (WWTPs), surface water and hospital sewage were screened for enterococci harbouring genes conferring resistance to four classes of antibiotics. Enterococci isolates harbouring ARGs were detected in raw influent and treated wastewater discharge from WWTPs and hospital sewage water. Plasmid and transposon encoded ermB (macrolide), tetM and tetL (tetracycline) as well as aph(3’)-IIIa (aminoglycosides) genes were frequently detected among the isolates, especially in E. faecalis. The presence of enterococci harbouring ARGs in the treated wastewater suggest that ARGs are discharged into the environment where their proliferation could be perpetuated. Among the enterococci clonal complexes (CCs) recovered from wastewater were E. faecium CC17 (ST18), which is frequently associated with hospital outbreaks and a novel E. faecalis sequence type (ST), ST780.

In this study, a proposed integrated high-gravity technology for air pollution control, CO2 capture, and alkaline waste utilization was comprehensively evaluated from engineering, environmental, and economic perspectives. After high-gravity technology and coal fly ash (CFA) leaching processes were integrated, flue gas air emissions removal (e.g., sulfate dioxide (SO2), nitrogen oxides (NOx), total suspended particulates (TSP)) and CO2 capture were studied. The CFA, which contains calcium oxide and thus, had high alkalinity, was used as an absorbent in removing air pollution residues. To elucidate the availability of technology for pilot-scale high-gravity processes, the engineering performance, environmental impact, and economic cost were simultaneously investigated. The results indicated that the maximal CO2, SO2, NOx, and TSP removal efficiencies of 96.3 ± 2.1%, 99.4 ± 0.3%, 95.9 ± 2.1%, and 83.4 ± 2.6% were respectively achieved. Moreover, a 112 kWh/t-CO2 energy consumption for a high-gravity process was evaluated, with capture capacities of 510 kg CO2 and 0.468 kg NOx per day. In addition, the fresh, water-treated, acid-treated, and carbonated CFA was utilized as supplementary cementitious materials in the blended cement mortar. The workability, durability, and compressive strength of 5% carbonated CFA blended into cement mortar showed superior performance, i.e., 53 MPa ±2.5 MPa at 56 days. Furthermore, a higher engineering performance with a lower environmental impact and lower economic cost could potentially be evaluated to determine the best available operating condition of the high-gravity process for air pollution reduction, CO2 capture, and waste utilization.

The area of agricultural wastes valorisation to fertilizers is attracting growing attention because of the increasing fertilizer prices of fertilizers and the higher costs of waste utilization. Despite the scientific and political interest in the concept of circular economy, few studies have considered the practical approach towards the implementation of elaborated technologies. This article outlines innovative strategies for the valorisation of different biobased wastes into fertilizers. The present work makes a significant contribution to the field of new ideas for waste biomass management to recover significant fertilizer nutrients. These results emphasize the importance of the biomass use as a base of renewable resources, which has recently gained special importance, especially in relation to the outbreak of pandemia and war. Broken supply chains and limited access to deposits of raw materials used in fertilizer production (natural gas, potassium salts) meant that now, as never before, it has become more important and feasible to implement the idea of a circular economy and a green deal. We have obtained satisfactory results that demonstrate that appropriate management of biological waste (originating from agriculture, food processing, aquaculture, forest, pharmaceutical industry, and other branches of industry, sewage sludge) will not only reduce environmental nuisance (reducing waste heaps), but will also allow recovery of valuable materials, such as nitrogen (especially valuable amino acids), phosphorus, potassium, microelements, and biologically active substances with properties that stimulate plant growth. The results reported here provide information on production of biobased plant protection products (bioagrochemicals) from agri-food waste. This work reports an overview of biopesticides and biofertilisers production technologies and summarizes their properties and the mechanisms of action.

Effective immobilization of industrial waste into biochar development could be one of the most promising technologies for solid waste management to achieve circular economy. In this study, post-industrial cotton textile waste (PICTW), a cellulose rich industrial waste, was subjected to slow pyrolysis to develop a surface engineered biochar through phosphoric acid impregnation. Biochar produced at 500 °C designated as PICTWB500 showed a maximum methylene blue number (240 mg g⁻¹) with remarkable specific surface area of 1498 m² g⁻¹. FESEM, FTIR, XRD and Raman spectra analysis were performed to investigate the surface texture and functionalities developed in the biochar. Adsorption efficiency of the biochar was assessed using drimarene red, blue, violet, and black dyes as model dye pollutants in batch mode at different biochar dose, pH and contact time. The maximum monolayer adsorption capacity was obtained in the range 285–325 mg g⁻¹ for different dyes, determined from Langmuir adsorption model. The kinetic behaviour was more favourable with the pseudo second-order model. The recycling ability of PICTWB500 was proven to be effective up to 6th cycle without compromising its adsorption efficiency significantly. This study demonstrated an excellent adsorption capability of the biochar in dye laden real textile effluent and recycling of spent biochar as a precursor of bio compost. Hence, this study established a dual win strategy for waste utilization in textile industry using a closed loop approach with substantial techno-economic feasibility that may have potential applications.

Anaerobic digestion, a promising technology for waste utilization and bioenergy generation, is a suitable approach to convert the shrimp waste to biomethane, reducing its environmental impact. In this study, shrimp chaff (SC) was co-digested corn straw (CS), wheat straw (WS), and sugarcane bagasse (SB). In co-digestion, SC enhanced biomethane production of CS by 8.47-fold, followed by SC + WS (5.67-folds), and SC + SB (3.37-folds). SC addition to agricultural biomass digestion also promoted the volatile solids removal up to 85%. Microbial community analysis of SC and CS co-digestion presented the dominance of phylum Bacteroidetes, Firmicutes, Proteobacteria, and Euryarchaeota. Proteolytic bacteria were dominant (18.02%) during co-digestion of SC and CS, with Proteiniphilum as major bacterial genera (14%) that converts complex proteinaceous substrates to organic acids. Among the archaeal community, Methanosarcina responsible for conversion of acetate and hydrogen to biomethane, increased up to 70.77% in SC and CS digestion. Addition of SC to the digestion of agricultural wastes can significantly improve the biomethane production along with its effective management to reduce environmental risks.

Airborne bacteria and fungi are important biological components of bioaerosol and play an important role in the conservation environmental. A microbiological study on bioaerosoles was carried out at the Municipal Waste Utilization Plant in Northern Poland and at points located beyond the facility at the distance of 150, 450, 1000 and 1250 m. The highest emission of bioaerosol occurred in the area of the waste landfill site and during compost pile turning. The total number of mesophilic bacteria, filamentous fungi and actinomycetes reached the values up to 104 CFU/m3. Strong air contamination with mannitol-positive and mannitol-negative staphylococci occurred remarkably more frequently in the area of the test facility than in the points beyond it. The number of indicator bacteria of Pseudomonas fluorescens was quite changeable and did not depend on a distance from pollutant emission source. The number of Escherichia coli rods remained at the low level of about 102 CFU/m3, and they were only isolated sporadically in the points beyond the landfill. The highest percentage of bacterial aerosol comprised Gram-positive cocci, and then Gram-positive bacilli. Mycological analyses confirmed the presence in the studied air of fungi with potentially allergic and mycotoxinogenic properties, such as: Aspergillus fumigatus, A. niger, A. terreus, Cladosporium herbarum and the genus Fusarium. The concentration level of microbial bioaerosol several times exceeded the threshold values recommended by the Polish Standards. The factors influenced the concentration of microorganisms in the tested air included the distance of the active landfill, weather conditions and the season.

The hydrolyzed protein derived from seafood waste is regarded as a premium and low-cost nitrogen source for microbial growth. In this study, optimization of enzymatic shrimp waste hydrolyzing process was investigated. The degree of hydrolysis (DH) with four processing variables including enzyme/substrate ratio (E/S), hydrolysis time, initial pH value and temperature, were monitored. The DH values were used for response surface methodology (RSM) optimization through central composite design (CCD) and for training artificial neural network (ANN) to make a process prediction. Results indicated that the optimum levels of variables are: E/S ratio at 1.64%, hydrolysis time at 3.59h, initial pH at 9 and temperature at 52.57°C. Hydrocarbon-degrading bacteria Bacillus subtilis N3-1P was cultivated using different DHs of hydrolysate. The associated growth curves were generated. The research output facilitated effective shrimp waste utilization.