In recent years, increasing in energy demand and the importance of using energy with minimum green- house gas emission (GHG) leads researchers to study about renewable energy resources such as biomasses. Biomasses can be converted to biofuels by applying the appropriate technologies. In this study, a hybrid group fuzzy multi-criteria decision making (MCDM) approach based on step-wise weight assessment ratio analysis (SWARA), technique for order preference by similarity to ideal Solution (TOPSIS), additive ratio assessment (ARAS), weighted aggregated sum product assessment (WASPAS) and simple additive weighting (SAW) in the fuzzy environment is applied to rank biomasses in the case of Hormozgan province in Iran, because of being a coastal area and the access to different types of first, second and third generation resources of biofuel. After ranking these resources by mentioned methods, two aggregated multi-criteria decision making (MCDM) methods (mean rank method and Copeland method) are employed to prioritize these biomasses.  Results of mean rank show that municipal solid wastes (MSW), fish wastes and microalgae have the minimum average rank, respectively and the results of Copeland method show that MSW, fish wastes and microalgae have the maximum (wins-loses), respectively. So, these biomasses are the most suitable ones in biofuel production in this province.

Plastic pollution is a threat to the environment because of its slow degradation rate and high usage. The aim of this study is to isolate plastic degrading microorganisms from soils. The soil samples used for this study were collected from dumpsites filled with plastic and plastic materials and the effectiveness of the degradation of plastic materials was studied over a period of six (6) weeks in broth and agar culture under laboratory conditions by weight determination method. Physicochemical and microbiological analysis was carried out on the various soil samples using standard protocols. The biodegradation of polyvinylchloride (PVC) was done in-vitro using the microorganisms isolated from the soil. Microorganisms that were able to degrade a higher percentage of the plastic materials were; Staphylococcus aureus, Streptococcus sp, Bacillus sp, Escherichia coli Aspergillus niger, Aspergillus flavus and Trichoderma viridae. The total viable count for bacteria and fungi were within the range of 11.8x105 CFU/g to 2.0x1010 CFU/g and 3.3x105 CFU/g to 0.1x1011 CFU/g respectively. Staphylococcus aureus, Streptococcus sp, Bacillus sp, Micrococcus sp, Aspergillus niger, Aspergillus flavus, and Trichoderma viridae, degraded plastic up to 25%, 31.2%, 25% 31.2%, 12%, 10% and 10% respectively. These isolates may be used to actively degrade plastics, thereby reducing the rate of plastic pollution in our ecosystem.

International audience | While long-term organic fertilizer (OF) applications tend to decrease copper (Cu) and zinc (Zn) availability in agricultural soils, earthworm bioturbation has been reported to have the opposite effect. Thus, the consequences of OF amendments in earthworm-inhabited soils on Cu and Zn bioavailability to earthworms are still under debate. Here, we assessed the effect of a decade of agronomically realistic OF applications on Cu and Zn availability in earthworm-inhabited soils and the consequences on Cu and Zn bioavailability to earthworms. An epi-endogeic species (Dichogaster saliens) was exposed in microcosms to three field-collected soils that had received either no, mineral, or organic fertilization for a decade. Dissolved organic matter (DOM) properties (i.e., concentration, aromaticity, and binding properties toward Cu), pH, and Cu and Zn availability (i.e., total concentration and free ionic activity) were determined in the solution of the soil containing earthworms. Cu and Zn bioavailability was assessed by measuring the net accumulation (ng) and concentration of Cu and Zn in earthworms (mg kg(-1)). Despite soil Cu and Zn contamination induced by a decade of OF applications, organic fertilization induced an increase in soil pH and DOM properties that drove the reduction of Cu and Zn availability in earthworm-inhabited soils, while bioturbation had little effect on soil pH, DOM properties, and Cu and Zn availability. Consistently, Cu and Zn bioavailability to earthworms did not increase with OF applications. From an ecotoxicological perspective, our results suggest that agronomically realistic applications of OF for a decade should not pose a risk to earthworms in terms of Cu and Zn net accumulation, but further studies have to be undertaken to understand consequent long-term toxicity after exposure.

Halogenated flame retardants (HFRs) were measured in 470 waste plastic articles from Ireland between 2019 and 2020. We identified articles containing concentrations of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCDD), and tetrabromobisphenol-A (TBBP-A) exceeding European Union limits. Enforcement of existing limits of 1000 mg/kg will render an estimated 3.1% (2800 t) of articles in the waste categories studied unrecyclable, increasing to: 4.0, 4.9, and 5.6% if limits were reduced to 500, 200, and 100 mg/kg respectively. Meanwhile, enforcing limits of 1,000, 500, 200, and 100 mg/kg will respectively remove 78, 82, 84, and 85% of PBDEs, HBCDD, and TBBP-A present in such waste. Other FRs targeted were detected infrequently and predominantly at very low concentrations. However, 2,4,6-tris(2,4,6-tribromophenoxy)-1,3,5-triazine (TTBP-TAZ) was detected in 3 display/IT product samples at 14,000 to 32,000 mg/kg, indicating elevated concentrations of FRs used as alternatives to PBDEs and HBCDD, will likely increase in future. Comparison with data for Ireland in 2015–16, revealed concentrations and exceedances of limits for PBDEs, HBCDD, and TBBP-A were similar or have declined. For end-of-life vehicle fabrics and foams, HBCDD and ΣPBDE concentrations declined significantly (p < 0.05) since 2015–16. Moreover, ΣPBDE concentrations in waste small domestic appliances are significantly lower in 2019–20, with a similarly significant decline for TBBP-A in waste IT and telecommunications articles. In contrast, HBCDD concentrations in waste extruded polystyrene increased significantly between 2015–16 and 2019–20. For other waste categories studied, no statistically significant temporal trends are evident (p > 0.05). Fewer samples exceeded PBDE and HBCDD limits in 2019–20 (7.8%) than 2015–16 (8.7%), while exceedances for TBBP-A fell from 2.4% in 2015–16 to 0.57% in 2019–20. While comparison between the 2015–16 and 2019-20 datasets provide a preliminary indication of changes, further monitoring is required if the impact of legislation designed to eliminate HFRs from the waste stream is to be fully evaluated.

The catalytic hydrogenolysis of a typical model compound of mulching film waste, polyethylene, was investigated as a potential way to improve economic efficiency of mulching film recycling. Nickel-based heterogeneous catalysts are proposed for polyethylene hydrogenolysis to produce liquid hydrocarbons. Among catalysts supported on various carriers, Ni/SiO₂ catalyst shows the highest activity which may due to the interactions between nickel and silica with the formation of nickel phyllosilicate. As high as 81.18% total gasoline and diesel range hydrocarbon was obtained from the polyethylene hydrogenolysis at relatively mild condition of 280 °C, and 3 MPa cold hydrogen pressure. The result is comparable to what have been reported in previous studies using noble metal catalysts. The gasoline and diesel range hydrocarbon are n-alkanes with a distribution at a range of C₄–C₂₂. The gas products are primarily CH₄ along with a small amount of C₂H₆ and C₃H₈. High yield of CH₄ as much as 9.68% was observed for the cleavage of molecule occurs along the alkane chain.

The removal of excessive ammonium from water is vital for preventing eutrophication of surface water and ensuring drinking water safety. Several studies have explored the use of biochar for removing ammonium from water. However, the efficacy of pristine biochar is generally weak, and various biochar modification approaches have been proposed to enhance adsorption capacity. In this study, biochar obtained from giant reed stalks (300, 500, 700 °C) was modified by sulfonation, and the ammonium adsorption capabilities of both giant reed biochars (RBCs) and sulfonated reed biochars (SRBCs) were assessed. The ammonium adsorption rates of SRBCs were much faster than RBCs, with equilibrium times of ∼2 h and ∼8 h for SRBCs and RBCs, respectively. The Langmuir maximum adsorption capacities of SRBCs were 4.20–5.19 mg N/g for SRBCs, significantly greater than RBCs (1.09–1.92 mg N/g). Physical-chemical characterization methods confirmed the increased levels of carboxylic and sulfonic groups on sulfonated biochar. The reaction of ammonium with these O-containing functional groups was the primary mechanism for the enhancement of ammonium adsorption by SRBCs. To conclude, sulfonation significantly improved the adsorption performance of biochar, suggesting its potential application for ammonium mitigation in water.

A large amount of disposable plastic face masks (DPFs) is produced and used during the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, which results in an inevitable consequence of the dramatic increase of DPFs waste. However, the impact of DPFs exposure to the environment on their toxicity is rarely considered. In this study, a range of 76–276 items/L microplastics (MPs) was detected in the DPFs leachates, and fibrous (> 80.3%) and polypropylene (PP, > 89.2%) MPs were dominant. Co, Cu, Ni, Sr, Ti and Zn, were commonly detected in all leachates of the tested DPFs. Organics, such as acetophenone, 2,4-Di-tert-butylphenol, benzothiazole, bisphenol-A and phthalide, were found in the DPFs leachate, which were including organic solvents and plasticizer. Besides, we first found an emerging environmental risk substance, namely environmentally persistent free radicals (EPFRs), was generated in the DPFs leachates. The characteristic g-factors of the EPFRs was in a range of 2.003–2.004, identified as mixture of carbon- and oxygen-centered radicals. By means of in vitro toxicity assay, the DPFs leachate were confirmed to cause cytotoxicity and oxidative stress. Significantly, it is found that the formed EPFRs could contribute more toxic effects. Furthermore, when compared to N95 respirators, the tested surgical masks tend to release more MPs, leach more metals and organics, and generate more EPFRs. Surgical masks were thus showed higher risk than N95 respirators after exposure to water. This work highlights the importance of understanding the chemical complexity and possible toxicity of DPFs for their risk assessment.