Soil Cd and Zn contamination has become a serious environmental problem. This work explored the performance of wood vinegar (WV) in enhancing the phytoextraction of Cd/Zn by hyperaccumulator Sedum alfredii Hance. Rhizosphere chemical properties, enzyme activities and bacterial community were analyzed to determine the mechanisms of metal accumulation in this process. Results demonstrated that, after 120 days growth, different times dilution of WV increased the shoot biomass of S. alfredii by 85.2%–148%. In addition, WV application significantly increased soil available Cd and Zn by lowing soil pH, which facilitated plant uptake. The optimal Cd and Zn phytoextraction occurred from the 100 times diluted WV (D100), which increased the Cd and Zn extraction by 188% and 164%, compared to CK. The 100 and 50 times diluted WV significantly increased soil total and available carbon, nitrogen and phosphorus, and enhancing enzyme activities of urease, acid phosphatase, invertase and protease by 10.1–21.4%, 29.1–42.7%,12.2–38.3% and 26.8–85.7%, respectively, compared to CK. High-throughput sequencing revealed that the D 100 significantly increased the bacterial diversity compared to CK. Soil bacterial compositions at phylum, family and genera level were changed by WV addition. Compared to CK, WV application increased the relative abundances of genus with plant growth promotion and metal mobilization function such as, Bacillus, Gemmatimonas, Streptomyces, Sphingomonas and Polycyclovorans, which was positively correlated to biomass, Cd/Zn concentrations and extractions by S. alfredii. Structural equation modeling analysis showed that, soil chemical properties, enzyme activities and bacterial abundance directly or indirectly contributed to the biomass promotion, Cd, and Zn extraction by S. alfredii. To sum up, WV improved phytoextraction efficiency by enhancing plant growth, Cd and Zn extraction and increasing soil nutrients, enzyme activities, and modifying bacterial community.

The San Joaquin Valley (SJV) of California has suffered persistent particulate matter (PM) pollution despite many years of control efforts. To further understand the chemical drivers of this problem and to support the development of State Implementation Plan for PM, a time-of-flight aerosol chemical speciation monitor (ToF-ACSM) outfitted with a PM₂.₅ lens and a capture vaporizer has been deployed at the Fresno-Garland air monitoring site of the California Air Resource Board (CARB) since Oct. 2018. The instrument measured non-refractory species in PM₂.₅ continuously at 10-min resolution. In this study, the data acquired from Oct. 2018 to May 2019 were analyzed to investigate the chemical characteristics, sources and atmospheric processes of PM₂.₅ in the SJV. Comparisons of the ToF-ACSM measurement with various co-located aerosol instruments show good agreements. The inter-comparisons indicated that PM₂.₅ in Fresno was dominated by submicron particles during the winter whereas refractory species accounted for a major fraction of PM₂.₅ mass during the autumn associated with elevated PM₁₀ loadings. A rolling window positive matrix factorization analysis was applied to the organic aerosol (OA) mass spectra using the Multilinear Engine (ME-2) algorithm. Three distinct OA sources were identified, including vehicle emissions, local and regional biomass burning, and formation of oxygenated species. There were significant seasonal variations in PM₂.₅ composition and sources. During the winter, residential wood burning and oxidation of nitrogen oxides were major contributors to the occurrence of haze episodes with PM₂.₅ dominated by biomass burning OA and nitrate. In autumn, agricultural activities and wildfires were found to be the main cause of PM pollution. PM₂.₅ concentrations decreased significantly after spring and were dominated by oxygenated OA during March to May. Our results highlight the importance of using seasonally dependent control strategies to mitigate PM pollution in the SJV.

In this review, global change processes have been linked to polycyclic aromatic compounds (PACs) in Canada and a first national budget of sources and sinks has been derived. Sources are dominated by wildfire emissions that affect western and northern regions of Canada disproportionately due to the location of Pacific and boreal forests and the direction of prevailing winds. Wildfire emissions are projected to increase under climate warming along with releases from the thawing of glaciers and permafrost. Residential wood combustion, domestic transportation and industry contribute the bulk of anthropogenic emissions, though they are substantially smaller than wildfire emissions and are not expected to change considerably in coming years. Other sources such as accidental spills, deforestation, and re-emission of previous industrial deposition are expected to contribute anthropogenic and biogenic PACs to nearby ecosystems. PAC sinks are less well-understood. Atmospheric deposition is similar in magnitude to anthropogenic sources. Considerable knowledge gaps preclude the estimation of environmental transformations and transboundary flows, and assessing the importance of climate change relative to shifts in population distribution and energy production is not yet possible. The outlook for PACs in the Arctic is uncertain due to conflicting assessments of competing factors and limited measurements, some of which provide a baseline but have not been followed up in recent years. Climate change has led to an increase in primary productivity in the Arctic Ocean, but PAC-related impacts on marine biota appear to be modest. The net effect of changes in ecological exposure from changing emissions and environmental conditions throughout Canada remains to be seen. Evidence suggests that the PAC budget at the national scale does not represent impacts at the local or regional level. The ability to assess future trends depends on improvements to Canada’s environmental measurement strategy and biogeochemical modelling capability.

Understanding the migration and conversion of nitrogen in wood-based panels (WBPs) during pyrolysis is fundamentally important for potentially transforming the N-containing species into valuable material-based products. This review firstly summarizes the commonly used methods for examining N evolution during the WBPs pyrolysis before probing into the association between the wood and adhesives.The potential effects of wood-adhesive interaction on the pyrolysis process are subsequently analyzed. Furthermore, the controversial statements from literature on the influence of adhesives on wood pyrolysis behavior are discussed, which is followed by the detailed investigation into the distribution and evolution of N-containing species in gas, liquid and char, respectively, during WBPs pyrolysis in recent studies. The differences in N species due to the heating sources (i.e. electrical heating vs microwave heating) are particularly compared. Finally, based on the characteristics of staged pyrolysis, co-pyrolysis and catalytic pyrolysis, the converting pathways for WBPs are proposed with an emphasis on the production of value-added chemicals and carbon materials, simultaneously mitigating NOₓ emission.

China has been famous for its porcelains for millennia, and the combustion processes of porcelain production emit substantial amounts of air pollutants, which have not been well understood. This study provided firsthand data of air pollutant emissions from biomass porcelain kilns. The emission factor of PM₂.₅ was 0.95 ± 1.23 g/kg during the entire combustion cycle, lower than that of biomass burning in residential stoves and coal burning in brick kilns, attributed to the removal effects of the long-distance transport in dragon kilns. The temporal trend of particle pollutants, including particulate matters (PMs) and particulate polycyclic aromatic hydrocarbons (PAHs) (low at ignition phase and high at the end) again indicated the removal effects of the special structure, while gaseous pollutants, such as gaseous PAHs, exhibited the opposite result. The GWC₁₀₀ was estimated as 1.4 × 10⁶ and 0.5 × 10⁶ kg CO₂e/yr for the scenarios in which 50% and 100% of the wood was renewable, respectively. The GWC₁₀₀ of dragon kilns is nearly equal to that of 745 households using wood-fueled stoves. These results indicate the necessity of pollution controls for biomass porcelain kilns to estimate the emission inventory and climate change.

Air pollution constitutes the greatest environmental threat to human health in the European Union. In Poland, the emission of particulate matter and harmful gases originating from local coal based boiler plants and the combustion of fuels in residential heating appliances is a considerable source of air pollution. The combustion of fuel in home furnaces is inefficient due to the use of cheap fuels of low heating parameters and the frequent addition of waste. For the purpose of the research, deciduous tree wood pellets were selected as the basic fuel with the admixture of plastic waste, rubber, waste paper, wood residues, diapers, textile waste, multi-material packaging, construction waste, biomass and alternative fuel (RDF). Examining ash samples to confirm the practices of combusting or co-combusting waste materials in heating appliances is considered to be one of the most reliable detection methods; however, the results of direct research require further data processing. The application of hierarchical clustering analysis to the obtained results arranged into a matrix enabled in a simple way to demonstrate the similarities between the examined samples of fuel and the samples of fuel mixed with waste materials in the parameters space as well as to analyze the similarities among the measured parameters (the content of particular elements in ash) in the space of the examined samples. The application of chemometric methods for the purpose of identifying the combusted fuels, and, in particular the co-combusted waste complements the currently used monitoring tools which control the use of low quality fuels or the combustion of waste of different origin.

The Amazon coastal zone has become contaminated with organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs). However, information about their distribution and sources in this area is scarce, despite increasing deforestation and oil exploitation. Therefore, individual PAHs were analysed in the sediments of the Oyapock estuary, which is located in the Amazon coastal zone. This study provides information about the spatial and short-term temporal distributions of PAHs and discusses the major sources of PAHs to better understand the anthropogenic processes occurring in adjacent areas. The concentrations of all sixteen priority PAHs defined by the US EPA (United States Environmental Protection Agency, ∑₁₆PAHs) ranged from 10.9 to 138.8 ng g⁻¹ with a mean and standard deviation = 37.9 ± 20.5 and indicated that this estuary is not contaminated, while the mean levels were similar to those found in other Amazon regions and pristine areas along the coast of Brazil. No significant differences were found in the sedimentary PAHs levels between the wet and dry sampling campaigns, despite the different climatic conditions. Diagnostic ratios, positive matrix factorization (PMF) and cluster analysis have shown that the majority of the investigated PAHs were derived from combustion processes (at least 55.1%, as estimated by the PMF model). Localized source inputs from oil and its by-products concomitantly with natural/biogenic sources appear to be secondary sources. The PAH contribution from biomass and wood combustion was approximately 13.6% and was relatively lower than other regions of the Amazon that are undergoing massive biomass burning. As the first study of PAHs in this region, this study provides vital information on the healthy state of the estuary and can serve as a baseline for assessing the impacts of acute oil disasters or the chronic input of PAHs as a result of human settlements.

Biochar has been proven as a soil amendment to improve soil environment. However, mechanistic understanding of biochar on soil physical properties and microbial community remains unclear. In this study, a wood biochar (WB), was incorporated into a highly weathered tropical soil, and after 1 year the in situ changes in soil properties and microbial community were evaluated. A field trial was conducted for application of compost, wood biochar, and polyacrylamide. Microstructure and morphological features of the soils were characterized through 3D X-ray microscopy and polarized microscopy. Soil microbial communities were identified through next-generation sequencing (NGS). After incubation, the number of pores and connection throats between the pores of biochar treated soil increased by 3.8 and 7.2 times, respectively, compared to the control. According to NGS results, most sequences belonged to Anaerolinea thermolimosa, Caldithrix palaeochoryensis, Chthoniobacter flavus, and Cohnella soli. Canonical correlation analysis (CCA) further demonstrated that the microbial community structure was determined by inorganic N (IN), available P (AP), pH, soil organic C (SOC), porosity, bulk density (BD), and aggregate stability. The treatments with co-application of biochar and compost facilitated the dominance of Cal. palaeochoryensis, Cht. flavus, and Coh. soli, all of which promoted organic matter decomposition and ammonia oxidation in the soil. The apparent increases in IN, AP, porosity, and SOC caused by the addition of biochar and compost may be the proponents of changes in soil microbial communities. The co-application of compost and biochar may be a suitable strategy for real world biochar incorporation in highly weathered soil.

Forest fires significantly affect the wildlife, vegetation, composition and structure of the forests. This study explores the potential of partially burnt wood recovered in the aftermath of a recent Canadian forest fire incident as a feedstock for generating hydrogen-rich syngas through hydrothermal gasification. Partially burnt wood was gasified in hydrothermal conditions to study the influence of process temperature (300–500 °C), residence time (15–45 min), feed concentration (10–20 wt%) and biomass particle size (0.13 mm and 0.8 mm) using the statistical Taguchi method. Maximum hydrogen yield and total gas yield of 5.26 mmol/g and 11.88 mmol/g, respectively were obtained under optimized process conditions at 500 °C in 45 min with 10 wt% feed concentration using biomass particle size of 0.13 mm. The results from the mean of hydrogen yield show that the contribution of each experimental factors was in the order of temperature > feed concentration > residence time > biomass particle size. Other gaseous products obtained at optimum conditions include CO₂ (3.43 mmol/g), CH₄ (3.13 mmol/g) and C₂–C₄ hydrocarbons (0.06 mmol/g).

In this study, the co-pyrolysis of food waste with lignocellulosic biomass (wood bark) in a continuous-flow pyrolysis reactor was considered as an effective strategy for the clean disposal and value-added utilization of the biowaste. To achieve this aim, the effects of major co-pyrolysis parameters such as pyrolysis temperature, the flow rate of the pyrolysis medium (nitrogen (N₂) gas), and the blending ratio of food waste/wood bark on the yields, compositions, and properties of three-phase pyrolytic products (i.e., non-condensable gases, condensable compounds, and char) were investigated. The temperature and the food waste/wood bark ratio were found to affect the pyrolytic product yields, while the N₂ flow rate did not. More non-condensable gases and less char were produced at higher temperatures. For example, as the temperature was increased from 300 °C to 700 °C, the yield of non-condensable gases increased from 6.3 to 17.5 wt%, while the yield of char decreased from 63.6 to 30.6 wt% for the co-pyrolysis of food waste and wood bark at a weight ratio of 1:1. Both the highest yield of hydrogen (H₂) gas and the most significant suppression of the formation of phenolic and polycyclic aromatic hydrocarbon (PAH) compounds were achieved with a combination of food waste and wood bark at a weight ratio of 1:1 at 700 °C. The results suggest that the synergetic effect of food waste and lignocellulosic biomass during co-pyrolysis can be exploited to increase the H₂ yield while limiting the formation of phenolic compounds and PAH derivatives. This study has also proven the effectiveness of co-pyrolysis as a process for the valorization of biowaste that is produced by agriculture, forestry, and the food industry, while reducing the formation of harmful chemicals.