The elutriation process has shown its efficiency to extract microplastics from sand and began to spread in the scientific community. This extraction technic requires knowing with accuracy the extraction velocities of particles. This study aims to test whether numerical modeling could help to calculate these velocities. From hydrodynamic equations, a numerical model has been developed and the outputs are compared to experimental extraction data. The results show, for the calculated velocities, the experimental plastic extraction yields will be higher than 90% for <10% of sand contamination. The model also allows determining that, with the actual protocol, the maximum plastic density which can be extracted is about 1450kg·m−3 whereas the detrimental resuspension, which may occur during the column filling step, is highlighted. From model calculations, it arises that changes in the column dimensioning and the protocol operations need to be considered.

In this study, we measured the concentrations of trace metals (Cr, Cu, Zn, As, Cd, Pb and Hg) in typical cultured animals (crabs, clams, and shrimps) and sediments from aquaculture ponds nearby mangrove wetlands in Zhangjiang estuary, China. The contents of Cr, Cu, Cd, and Pb in mangrove sediments were significantly higher than those in pond sediments, while an inverse distribution was observed for Zn, As, and Hg. Significantly higher concentrations of trace metals were found in clams from the mangrove mudflats compared to those from the aquaculture ponds. The sources of trace metals in the clams were primarily from organic fertilizer, whereas those in the shrimp were from contaminated sediment. The results of geo-accumulation index and the ecological risk assessment indicated that the aquaculture ponds near the mangrove wetlands in this subtropical estuary posed a special risk of endogenous and exogenous trace metal pollution to nearby systems.

Liaodong Bay, a semi-enclosed bay located in northeastern China, is impacted by the discharges of five rivers. We analyzed 100 surface sediment samples from the Shallow Sea Wetland of Liaodong Bay for grain size and concentrations of organic carbon (Corg) and heavy metals. The ranges of the heavy metal concentrations were 2.32–17μg/g (As), 0.025–1.03μg/g (Cd), 18.9–131μg/g (Cr), 4.6–36.1μg/g (Cu), 0.012–0.29μg/g (Hg), 13.7–33.9μg/g (Pb), and 17.4–159μg/g (Zn). Pollution assessments revealed that some stations were moderately to highly polluted with As, Cd, and Hg. Severe pollution was apparent in the Xiaoling River estuary; lower concentrations of heavy metals were observed in other river mouths, where the sediments were more coarse. The distributions of the heavy metals were closely associated with Corg and grain size.

Scarce studies have been published reporting field measurements of nitrous oxide (N2O) emissions from vineyards, particularly for European conditions. The aim this study was to assess the effect of conventional tillage and no-tillage cover crops on direct N2O emission factor from vineyards (Vitis vinifera L.) in Portugal. A two-year field study was carried out in central Portugal (Nelas, Portugal). The experiment was established in a mature non-irrigated vineyard. The following four treatments with three replications were considered: soil tillage of the inter-row (Till), treatment Till followed by application of mineral fertiliser (50 kg N ha−1) (Till + N), permanent resident vegetation in the inter-row (NoTill), and treatment No-Till followed by application of mineral fertiliser (50 kg N ha−1) (NoTill + N). The carbon dioxide (CO2) and N2O fluxes were measured by the closed chamber technique and analysed by gas chromatography during two consecutive growing seasons (Mars-September of 2015 and 2016) of the grapevine crop. The results showed that the average direct N2O EF for vineyards managed with conventional soil tillage in the inter-row was 0.57 ± 0.12% of N input and cover cropping by permanent resident vegetation in the inter-row reduces N2O emission in 60% (0.23 ± 0.29% of N input). Thus, the vineyard cover cropping was recommended as mitigation measure in order to reduce N2O emissions. The defaults direct N2O EF currently recommended by IPCC was not appropriated for vineyards and N2O emissions are currently potentially overestimated in the Portuguese inventory.

Large databases of fecal indicator bacteria (FIB) measurements are available for coastal waters. With the assistance of satellite imagery, we illustrated the power of assessing data for many sites by evaluating beach features such as geomorphology, distance from rivers and canals, presence of piers and causeways, and degree of urbanization coupled with the enterococci FIB database for the state of Florida. We found that beach geomorphology was the primary characteristic associated with enterococci levels that exceeded regulatory guidelines. Beaches in close proximity to marshes or within bays had higher enterococci exceedances in comparison to open coast beaches. For open coast beaches, greater enterococci exceedances were associated with nearby rivers and higher levels of urbanization. Piers and causeways had a minimal contribution, as their effect was often overwhelmed by beach geomorphology. Results can be used to understand the potential causes of elevated enterococci levels and to promote public health.

In this paper, we examined the ingestion of marine debris (MD) in South American fur seals (SAFS), Arctocephalus australis, found dead in coastal beaches of northern Argentina and southern Brazil. Seven percent of 133 SAFS analyzed presented marine debris in their stomach (n=10), with no differences between sampling countries (Brazil n=7, Argentina n=3) and sexes (female=3; male=6). However, significant differences were observed between ages classes, with MD exclusively present in stomach contents of young specimens. Plastics represents 90% of MD ingested by the SAFS, whereas regarding the source, fishery-related items (e.g. monofilament lines) were the main MD (70%), with a lesser proportion of packaging (e.g. pieces of bags). Low numbers but large size pieces of MD were found in each stomach affected. Negative effects on the individuals could not be fully evaluated. Therefore, the potential impacts of the marine debris to the SAFS deserve further elucidation.

The distribution and sources of PAHs and n-alkanes were determined in the surface sediments from 202 locations in Shadegan international wetland with 537,700ha. The concentrations of total n-alkanes and PAHs ranged from 395.3 to 14933.46μgg−1dw and 593.74 to 53393.86ngg−1dw, respectively. Compared with other worldwide surveys, the concentration and contamination of sedimentary hydrocarbons were classified very high. A common petrogenic hydrocarbon source was strongly suggested in all sites by n-alkanes' profile with a Cmax at n-C20, Pr/Ph and CPI ratios<1 in all sites, and high percentage of UCM. Typical profile of petrogenic PAHs with alkyl-substituted naphthalenes and phenanthrenes predominance, various PAH ratios and multivariate analysis indicated that PAHs were mainly derived from petrogenic source. Naphthalene-derived compounds in all sites were significantly above their ERL, and adversely affected benthic biota. 92% of the sites had mean ERM values<0.1, indicating high ecological risk on the wildlife of the wetland.

Effective emulsification plays an important role in the treatment of marine oil spills. The negative effects of chemical surfactants have necessitated a search for alternative dispersant that are sustainable and environmentally-friendly. To identify alternate dispersants, oil-in-seawater emulsions stabilized by hydrocarbon-degrading bacteria were investigated. After individual immobilization and surface-modification, the hydrocarbon-degrading bacteria, Bacillus cereus S-1, was found to produce a stable oil-in-seawater Pickering emulsion, which was similar to particle emulsifiers. The individual immobilization and surface-modification process improved the surface hydrophobicity and wettability of the bacterial cells, which was responsible for their effective adsorption at the oil–water interface. Through effective emulsification, the biodegradation of oil was remarkably facilitated by these treated bacteria, because of the increased interfacial area. By combining the emulsification and biodegradation, the results of this reported work demonstrated a novel approach for developing environmentally-friendly bioremediation technology in the field of oil treatment.

We extensively reviewed the macrozoobenthos around Dokdo, Korea, by analyzing metadata collected over the past 50years. The Dokdo macrozoobenthos was represented by 578 species belonging to 243 families from 12 phyla, where four major phyla (or classes) collectively accounted for 86% to total. Mollusks, arthropods, and cnidarians were semi-equally occurred in intertidal and subtidal areas, while polychetes dominated the subtidal zone. The northern most region of Dokdo had the greatest biodiversity (173 species). The taxonomic distinctness analysis (delta+) indicated a close association between species by region, although the number of species varied greatly. About half of the species did not occur cross the locations (n=20), indicating strong habitat preferences of Dokdo macrofaunal assemblages. Overall, the diversity of Dokdo was greater than that of Ulleung Island (east coast), but comparable to that of the well-developed tidal flats in the western Korean waters, highlighting its status as a biodiversity hotspot.

A review of the state of the art in oil spill modeling, focused on the period from 2000 to present is provided. The review begins with an overview of the current structure of spill models and some lessons learned from model development and application and then provides guiding principles that govern the development of the current generation of spill models. A review of the basic structure of spill models, and new developments in specific transport and fate processes; including surface and subsurface transport, spreading, evaporation, dissolution, entrainment and oil droplet size distributions, emulsification, degradation, and sediment oil interaction are presented. The paper concludes with thoughts on future directions in the field with a primary focus on advancements in handling interactions between Lagrangian elements.