PURPOSE: Biodegradation and biodecolorization of Drimarene blue K2RL (anthraquinone) dye by a fungal isolate Aspergillus flavus SA2 was studied in lab-scale immobilized fluidized bed bioreactor (FBR) system. METHOD: Fungus was immobilized on 0.2-mm sand particles. The reactor operation was carried out at room temperature and pH 5.0 in continuous flow mode with increasing concentrations (50, 100, 150, 200, 300, 500 mg l−1) of dye in simulated textile effluent on the 1st, 2nd, 5th, 8th, 11th, and 14th days. The reactors were run on fill, react, settle, and draw mode, with hydraulic retention time (HRT) of 24–72 h. Total run time for reactor operation was 17 days. RESULTS: The average overall biological oxygen demand (BOD), chemical oxygen demand (COD), and color removal in the FBR system were up to 85.57%, 84.70%, and 71.3%, respectively, with 50-mg l−1 initial dye concentration and HRT of 24 h. Reductions in BOD and COD levels along with color removal proved that the mechanism of biodecolorization and biodegradation occurred simultaneously. HPLC and LC–MS analysis identified phthalic acid, benzoic acid, 1, 4-dihydroxyanthraquinone, 2,3-dihydro-9,10-dihydroxy-1,4-anthracenedione, and catechol as degradation products of Drimarene blue K2RL dye. Phytotoxicity analysis of bioreactor treatments provided evidence for the production of less toxic metabolites in comparison to the parent dye. CONCLUSION: The present fluidized bed bioreactor setup with indigenously isolated fungal strain in its immobilized form is efficiently able to convert the parent toxic dye into less toxic by-products.

BACKGROUND: In this paper, batch removal of hexavalent chromium from aqueous solutions by Araucaria heterophylla leaves was investigated. The batch experiments were conducted to study the adsorption of metal species and effect of different pH, contact time, metal concentration, biosorbent concentration, and adsorption capacity. METHOD: Freundlich and Langmuir’s isotherm model were used to describe the adsorption behavior, and the experimental results fitted Freundlich model well. RESULTS: The adsorption efficiency observed for all chromium concentrations, i.e., 1, 3, 5, and 10 mg/L was 100% and the equilibrium was achieved in 30 min for 1 and 3 mg/L, whereas for 5 and 10 mg/L, it was less than 60 min. FTIR spectra was taken to identify functional groups involved in the biosorption. CONCLUSION: Thus, Araucaria leaves can be considered as one of the cheap and efficient biosorbent for toxic hexavalent chromium removal from natural or wastewaters.

PURPOSE: The purpose of this study is the development of a suitable process for the disinfection of drinking water by evaluating bactericidal efficacy of silver ions from silver electrodes. METHODS: A prototype of a silver ioniser with silver electrodes and control unit has been fabricated. Silver ions from silver electrodes in water samples were estimated with an atomic absorption spectrophotometer. A fresh culture of Escherichia coli (1.75 × 103 c.f.u./ml) was exposed to 1, 2, 5, 10 and 20 ppb of silver ions in 100 ml of autoclaved tap water for 60 min. The effect of different pH and temperatures on bactericidal efficacy was observed at constant silver ion concentration (5 ppb) and contact time of 30 min. RESULTS: The maximum bactericidal activity (100%) was observed at 20 ppb of silver ion concentration indicating total disinfection after 20 min while minimum bactericidal activity (25%) was observed after 10 min at 01 ppb of silver ions. Likewise, 100% bactericidal activity was noticed with 2, 5 and 10 ppb of silver ions after 60, 50 and 40 min, respectively. Bactericidal activity at pH 5, 6, 7, 8 and 9 was observed at 79.9%, 79.8%, 80.5%, 100% and 100%, respectively, whereas it was 80.4%, 88.3%, 100%, 100% and 100% at 10°C, 20°C, 30°C, 40°C and 50°C, respectively. CONCLUSION: The findings of this study revealed that very low concentrations of silver ions at pH 8–9 and temperature >20°C have bactericidal efficacy for total disinfection of drinking water. Silver ionisation is suitable for water disinfection and an appropriate alternative to chlorination which forms carcinogenic disinfection by-products.

INTRODUCTION: This study presents the performance evaluation of a tailor-made passive sampler developed for the monitoring of tropospheric ozone. METHODS: The performance of the passive sampler was tested in the field conditions in terms of accuracy, precision, blank values, detection limit, effects of some parameters such as sampling site characteristics and sampling period on the field blanks, self-consistency, experimental and theoretical uptake rates, shelf life and comparison with commercial passive samplers. RESULTS: There was an agreement (R 2 = 0.84) between the responses of passive sampler and the continuous automatic analyser. The accuracy of the sampler, expressed as percent relative error, was obtained lower than 15%. Method precision in terms of coefficient of variance for three simultaneously applied passive samplers was 12%. Sampler detection limit was 2.42 μg m−3 for an exposure period of 1 week, and the sampler can be stored safely for a period of up to 8 weeks before exposure. Satisfactory self-consistency results showed that extended periods gave the same integrated response as a series of short-term samplers run side by side. The uptake rate of ozone was found to be 10.21 mL min−1 in a very good agreement with the theoretical uptake rate (10.32 mL min−1). The results of the comparison study conducted against a commercially available diffusion tube (Gradko diffusion tube) showed a good linear relationship (R 2 = 0.93) between two passive samplers. CONCLUSIONS: The sampler seems suitable to be used in large-scale measurements of ozone where no data are available or the number of existing automated monitors is not sufficient.

INTRODUCTION: Environmental safe and friendly management and disposal of wastewater sludge is a problem of every treatment plant throughout the world. Bioseparation and dewaterability of raw domestic wastewater sludge were evaluated for proper management and disposal by mycoremediation, i.e., using prior grown 2% (v/v) spore suspension of filamentous fungal (Mucor hiemalis Wehmer) broth inoculation, which were grown in 2% (w/v) solution of malt extract and wheat flour for 48–60 h in orbital shaker. DISCUSSION: Within 2–3 days of treatment application, encouraging results were achieved in total dry solids (TDS), total suspended solid (TSS), turbidity, chemical oxygen demand (COD), specific resistance to filtration (SRF), and pH due to fungal treatment in recognition of bioseparation and dewaterability of wastewater sludge compared to control. The significant reduction of TDS was remarked at fungal biomass (FB) in wheat flour (WF) treatment. The removal of TSS, turbidity, COD, and SRF were observed 96.0%, 99.4%, 92.6%, and 97.6%, respectively, in supernatant at 5 days by FB in WF. The SRF measuring the dewaterability was decreased with maximum (0.26 × 10−12 mg/kg) equivalent to 95.5% at 2 days in FB in WF also. FB in WF broth is a potential, environmental friendly, comparatively low-cost biological technique which might play the significant role for bioremediation and bioseparation of domestic wastewater sludge. The present technique may bring a dynamic change in treatment of wastewater in future.

BACKGROUND: Continuous monitoring of air quality is implemented by government institutions at fixed ambient sites. However, the correlation between fixed site measurements and exposure of individual persons to air contaminants is likely to be weak. MATERIALS AND METHODS: We measured particulate matter both outdoors and indoors by following the spatial movement of individuals. Sixteen test persons took part and carried a measurement backpack for a 24-h period. The backpack was comprised of a Grimm Aerosol Spectrometer model 1.109, a GPS device, and a video camera for tracking of human behavior. The spectrometer provided information about particle numbers and mass in 32-size classes with a high temporal resolution of 6 s. RESULTS: The personal exposure of individuals during 24 h could significantly exceed the outdoor particulate matter (PM)₁₀ concentrations measured at the fixed sites. The average 24-h exposure of all test persons for PM₁₀ varied from 27 to 322 μg m⁻³. Environmental tobacco smoke and cooking emissions were among the main indoor sources for PM. The amount of particulate matter a test person was exposed to was highly dependent on the spatial behavior and the surrounding microenvironment conditions. DISCUSSION: Large-scale experiments including personal measurements might help to improve modeling approaches to approximate the actual exposure on a statistically sound basis.

PURPOSE: Psychoactive compounds—meprobamate, pyrithyldione, primidone, and its metabolites, phenobarbital, and phenylethylmalonamide—were detected in groundwater within the catchment area of a drinking water treatment plant located downgradient of a former sewage farm in Berlin, Germany. The aim of this study was to investigate the distribution of the psychoactive compounds in anoxic groundwater and to assess the risk of drinking water contamination. Groundwater age was determined to achieve a better understanding of present hydrogeological conditions. METHODS: A large number of observation and production wells were sampled. Samples were analyzed using solid-phase extraction and ultrahigh-performance liquid chromatography–tandem mass spectrometry. Groundwater age was estimated using the helium–tritium (3He–3H) dating method. RESULTS: Concentrations of psychoactive compounds up to 1 μg/L were encountered in the contamination plume. Generally, concentrations of phenobarbital and meprobamate were the highest. Elevated concentrations of the analytes were also detected in raw water from abstraction wells located approximately 2.5 km downgradient of the former sewage farm. Concentrations in the final drinking water were below the limit of quantification owing to dilution. The age of shallow groundwater samples ranged from years to a decade, whereas groundwater was up to four decades old at 40 m below ground. Concentrations of the compounds increased with groundwater age. CONCLUSIONS: Elevated concentrations of psychoactive drugs indicate a strong persistence of these compounds in the environment under anoxic aquifer conditions. Results suggest that the heritage of sewage irrigation will affect raw water quality in the area for decades. Therefore, further monitoring of raw and final drinking water is recommended to ensure that contaminant concentrations remain below the health-based precautionary value.

INTRODUCTION: There is still interest in a unified methodology to quantify the mass of particulate material emitted into the atmosphere by activities inherent to open-pit mining. For the case of total suspended particles (TSP), the current practice is to estimate such emissions by developing inventories based on the emission factors recommended by the USEPA for this purpose. However, there are disputes over the specific emission factors that must be used for each activity and the applicability of such factors to cases quite different to the ones under which they were obtained. There is also a need for particulate matter with an aerodynamic diameter less than 10 μm (PM₁₀) emission inventories and for metrics to evaluate the emission control programs implemented by open-pit mines. STANDARDIZED EMISSION INVENTORY METHODOLOGY: To address these needs, work was carried out to establish a standardized TSP and PM₁₀ emission inventory methodology for open-pit mining areas. The proposed methodology was applied to seven of the eight mining companies operating in the northern part of Colombia, home to the one of the world’s largest open-pit coal mining operations (∼70 Mt/year). RESULTS: The results obtained show that transport on unpaved roads is the mining activity that generates most of the emissions and that the total emissions may be reduced up to 72% by spraying water on the unpaved roads. Performance metrics were defined for the emission control programs implemented by mining companies. It was found that coal open-pit mines are emitting 0.726 and 0.180 kg of TSP and PM₁₀, respectively, per ton of coal produced. It was also found that these mines are using on average 1.148 m² of land per ton of coal produced per year.

PURPOSE: Air pollution is a serious health problem throughout the world, exacerbating a wide range of respiratory and vascular illnesses in urban areas. The mass artificial plantation is very helpful to absorb dust and reduce pollution for conservation of the urban environment. The foliar surface of plants is an important receptor of atmospheric pollutants. Therefore, selection of suitable plant species for urban environment is very important. METHODS: The dust-retaining capability of urban trees in Guangzhou was determined at four different types of urban area, and the morphological traits of their leaves such as wax, cuticle, stomata, and trichomes were observed under a scanning electron microscope. RESULTS: It was determined that the dust-retaining capability of any given tree species is significantly different in the same place. Of the four studied tree species in the industrial area (IA) and commercial/traffic areas (CTA) type urban areas, the highest amounts of dust removed by Mangifera indica Linn was 12.723 and 1.482 g/m2, respectively. However, in contrast, the equivalent maxima for Bauhinia blakeana is only 2.682 g/m2 and 0.720 g/m2, respectively. Different plant species have different leaf morphology. The leaf of M. indica has deep grooves and high stomata density which are in favor of dust-retained, and thus, their dust-retained capability is stronger, while B. blakeana has the cells and epicuticular wax with its stomata arranging regularly, resulting in poor dust catching capability. Leaf size was also shown to be related to dust capture for the four studied tree species. CONCLUSIONS: The dust removal capacity of individual tree species should be taken into account in the management of greening plantation in and around an urban area. It was also shown that temporal variation in dust accumulation occurred over the 28-day observation period and this was discussed. Furthermore, spatial contrasts in dust accumulation were evidenced by the data. This reflected the differing pollution loadings of the four urban-type areas. The highest amount of dust accumulation was associated with the industrial area in which shipyard and steelworks occurred whilst the lowest dust accumulation was associated with the grounds of the University which was the control area.

INTRODUCTION: Concentrations and congener profiles of polychlorinated biphenyls (PCBs) and their hydroxylated metabolites (OH-PCBs) in placenta samples from a Madrid population (Spain) are reported. Structure dependent retentions of OH-PCBs are known to occur in both humans and wildlife, making it of interest to assess placental transfer of both parent compounds and their metabolites to the developing foetus. RESULTS: The ΣPCB concentrations found in placenta samples were in the range 943–4,331 pg/g fresh weight (f.w.), and their hydroxylated metabolites showed a 20-time lower concentration level (53–261 pg/g f.w.). The PCB profiles were surprisingly dominated by CB-52 and CB-101 accounting for more than 44% of the total PCB concentration. This is indicating a source of exposure that is not yet identified. The OH-PCB profiles were dominated by 4-OH-CB187 and 4-OH-CB146, representing >50% of the ΣOH-PCB concentration of the placenta samples. Statistical analysis of the data revealed strong correlations between the PCB congeners, among some OH-PCBs, and between OH-PCB metabolites with a meta- and para- substitution pattern. Both PCB and OH-PCB concentrations presented homogeneous distribution, what allowed the establishment of a partial least squares model that correlated the concentrations of OH-PCB with those of PCBs in placenta samples. In addition, causal correlations were observed between the concentrations of OH-PCBs and those of their corresponding PCB precursors.