The use of the soil can alter its functionality and influence the (bio)availability of any contaminants present. Our study considers two types of agricultural soils, rainfed and olive soils, managed according to conventional practices that apply contaminants directly to the soil (fertilizers, pesticides, fungicides, etc.) and receive contaminants from the atmosphere (traffic, industry, etc.); and a forest soil that is not subject to these agricultural practices. In this scenario, we consider a mixture of 16 trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Ni, Pb, Se, Sb, Sn, V and Zn), since their interactions with the soil can produce synergistic and/or antagonistic effects that are not considered in most studies. We studied whether the content and (bio)availability of low concentrations of a mixture of trace elements affect the soil functionality in terms of the activity of some key enzymes We analysed the total, potentially and immediately available fractions, the soil parameters and soil enzyme activity. The results show that the functionality of the soils studied was affected despite the low concentrations of trace elements. The highest concentrations of total trace elements and available fractions were found in forest soils compared to the other two uses. Soil enzyme activity is best explained by the potentially available fraction of a mixture of trace elements and physico-chemical soil variables. In our study, pH, total nitrogen, organic carbon and fine mineral particles (silt and clay) had an influence on soil enzyme activity and the (bio)available fractions of trace elements.

Microplastics and antibiotics are two classes of emerging contaminants with proposed negative impacts to aqueous ecosystems. Adsorption of antibiotics on microplastics may result in their long-range transport and may cause compound combination effects. In this study, we investigated the adsorption of 5 antibiotics [sulfadiazine (SDZ), amoxicillin (AMX), tetracycline (TC), ciprofloxacin (CIP), and trimethoprim (TMP)] on 5 types of microplastics [polyethylene (PE), polystyrene (PS), polypropylene (PP), polyamide (PA), and polyvinyl chloride (PVC)] in the freshwater and seawater systems. Scanning Electron Microscope (SEM) and X-ray diffractometer (XRD) analysis revealed that microplastics have different surface characterizes and various degrees of crystalline. Adsorption isotherms demonstrated that PA had the strongest adsorption capacity for antibiotics with distribution coefficient (Kd) values ranged from 7.36 ± 0.257 to 756 ± 48.0 L kg−1 in the freshwater system, which can be attributed to its porous structure and hydrogen bonding. Relatively low adsorption capacity was observed on other four microplastics. The adsorption amounts of 5 antibiotics on PS, PE, PP, and PVC decreased in the order of CIP > AMX > TMP > SDZ > TC with Kf correlated positively with octanol-water partition coefficients (Log Kow). Comparing to freshwater system, adsorption capacity in seawater decreased significantly and no adsorption was observed for CIP and AMX. Our results indicated that commonly observed polyamide particles can serve as a carrier of antibiotics in the aquatic environment.

Two hundred sixty-three fine particulate matter (PM2.5) samples collected on 3-day intervals over a 14-month period at two sites in the San Joaquin Valley (SJV) were analyzed for organic carbon (OC), elemental carbon (EC), water soluble organic carbon (WSOC), and organic molecular markers. A unique source profile library was applied to a chemical mass balance (CMB) source apportionment model to develop monthly and seasonally averaged source apportionment results. Five major OC sources were identified: mobile sources, biomass burning, meat smoke, vegetative detritus, and secondary organic carbon (SOC), as inferred from OC not apportioned by CMB. The SOC factor was the largest source contributor at Fresno and Bakersfield, contributing 44% and 51% of PM mass, respectively. Biomass burning was the only source with a statistically different average mass contribution (95% CI) between the two sites. Wintertime peaks of biomass burning, meat smoke, and total OC were observed at both sites, with SOC peaking during the summer months. Exceptionally strong seasonal variation in apportioned meat smoke mass could potentially be explained by oxidation of cholesterol between source and receptor and trends in wind transport outlined in a Residence Time Analysis (RTA). Fast moving nighttime winds prevalent during warmer months caused local emissions to be replaced by air mass transported from the San Francisco Bay Area, consisting of mostly diluted, oxidized concentrations of molecular markers. Good agreement was observed between SOC derived from the CMB model and from non-biomass burning WSOC mass, suggesting the CMB model is sufficiently accurate to assist in policy development. In general, uncertainty in monthly mass values derived from daily CMB apportionments were lower than that of CMB results produced with monthly marker composites, further validating daily sampling methodologies.Strong seasonal trends were observed for biomass and meat smoke OC apportionment, and monthly mass averages had lowest uncertainty when derived from daily CMB apportionments.

The air pollutant species and concentrations in taxis' cabins can present significant health impacts on health. This study measured the concentrations of benzene, toluene, ethylbenzene, xylene (BTEX), formaldehyde, and acetaldehyde in the cabins of four different taxi models. The effects of taxi's age, fuel type, and refueling were investigated. Four taxi models in 3 age groups were fueled with 3 different fuels (gas, compressed natural gas (CNG), and liquefied petroleum gas (LPG)), and the concentrations of 6 air pollutants were measured in the taxi cabins before and after refueling. BTEX, formaldehyde, and acetaldehyde sampling were actively sampled using NIOSH methods 1501, 2541, and 2538, respectively. The average BTEX concentrations for all taxi models were below guideline values. The average concentrations (±SD) of formaldehyde in Model 1 to Model 4 taxis were 889 (±356), 806 (±323), 1144 (±240), and 934 (±167) ppbv, respectively. Acetaldehyde average concentrations (±SD) in Model 1 to Model 4 taxis were 410 (±223), 441 (±241), 443 (±210), and 482 (±91) ppbv, respectively. Refueling increased the in-vehicle concentrations of pollutants primarily the CNG and LPG fuels. BTEX concentrations in all taxi models were significantly higher for gasoline. Taxi age inversely affected formaldehyde and acetaldehyde. In conclusion, it seems that refueling process and substitution of gasoline with CNG and LPG can be considered as solutions to improve in-vehicle air concentrations for taxis.

We conducted an exposure experiment with Diffusive Gradients in Thin- Films (DGT), fathead minnow (Pimephales promelas), and yellow lampmussel (Lampsilis cariosa) to estimate bioavailability and bioaccumulation of Cu. We hypothesized that Cu concentrations measured by DGT can be used to predict Cu accumulation in aquatic animals and alterations of water chemistry can affect DGT's predict ability. Three water chemistries (control soft water, hard water, and addition of natural organic matter (NOM)) and three Cu concentrations (0, 30, and 60 μg/L) were selected, so nine Cu-water chemistry combinations were used. NOM addition treatments resulted in decreased concentrations of DGT-measured Cu and free Cu ion predicted by Biotic Ligand Model (BLM). Both hard water and NOM addition treatments had reduced concentrations of Cu ion and Cu-dissolved organic matter complexes compared to other treatments. DGT-measured Cu concentrations were linearly correlated to fish accumulated Cu, but not to mussel accumulated Cu. Concentrations of bioavailable Cu predicted by BLM, the species complexed with biotic ligands of aquatic organisms and, was highly correlated to DGT-measured Cu. In general, DGT-measured Cu fit Cu accumulations in fish, and this passive sampling technique is acceptable at predicting Cu concentrations in fish in waters with low NOM concentrations.

Polychlorinated diphenyl ethers (PCDEs) are typical halogenated aromatic pollutants that have shown various toxicological effects on organisms. However, the contamination status of PCDEs in the fresh water lakes of China remains poorly researched. In this study, the levels of 15 congeners of PCDEs in the sediments, suspended particulate matter (SPM) and water of Chaohu Lake were determined. The results showed that the ranges of concentrations of total PCDEs (ΣPCDEs) in the sediment, SPM and water were 0.279 ng g−1 dry weight (d.w.)–2.474 ng g−1 d.w., 0.331 ng g−1 d.w.–2.013 ng g−1 d.w. and 0.351 ng L−1–2.021 ng L−1, respectively. The most abundant congeners found in sediments, SPM and water were 3,3′,4,4′-tetra-CDE, deca-CDE and 2,4,6-tri-CDE, with average contributive ratios of 17.36%, 15.48% and 20.63%, respectively. The medium and higher chlorinated PCDEs (e.g., penta- and deca-CDEs) were the dominant congeners in sediments and SPM. The percentages of lower chlorinated PCDEs (e.g., tri-CDEs) in the water were higher than those in the sediments. The combined input of ΣPCDEs from the eight main tributaries to Chaohu Lake was estimated at 6.94 kg y−1. Strong linear correlations between the concentrations of ΣPCDEs and organic carbon (OC) contents in three type samples from Chaohu Lake suggested OC could influence the distribution of PCDEs in Chaohu Lake substantially. In addition, the calculated average organic carbon normalized partition coefficients (logKoc) of 15 PCDEs between water and SPM were in the range of 4.55–5.45 mL g−1. This study confirmed that Chaohu Lake is contaminated by PCDEs.

Indoor air samples were collected from private homes and various occupational indoor environments using passive air sampler and analysed for fluorotelomer alcohols (FTOHs), brominated flame retardants (BFRs), organophosphorus flame retardants (OPFRs) and cyclic volatile methyl siloxanes (cVMSs). The aim was to investigate their occurrence in indoor air, factors that may affect their presence and human daily exposure dose (DED) via inhalation. In general, levels of cVMSs were 3–4 orders of magnitude greater than the other compound classes. OPFRs concentration was found significantly higher than BFRs in indoor air. The most abundant compounds in each chemical class were 8:2 FTOH, 2,4,6-TBP, TNBP and TCEP and decamethylcyclopentasiloxane (D5). Home samples contained higher level of FTOHs, BFRs and cVMSs than occupational environments, whereas concentration of OPFRs in office samples were higher. BFRs concentrations were significantly correlated with building age and with the number of electronic/electrical devices at the sampling sites. Moreover, significantly lower levels of FTOHs and cVMSs were observed in rooms with forced-ventilation system. Estimated DED via inhalation was significantly higher at home than in office and the total DED was on average 3–5 orders of magnitude lower than the reference value.

Selenium (Se) is an essential trace element for humans and animals, although controversial for different plant species. There exists a narrow line between essential, beneficial and toxic levels of Se to living organisms which greatly varies with Se speciation, as well as the type of living organisms. Therefore, it is crucial to monitor its solid- and solution-phase speciation, exposure levels and pathways to living organisms. Consumption of Se-laced food (cereals, vegetables, legumes and pulses) is the prime source of Se exposure to humans. Thus, it is imperative to assess the biogeochemical behavior of Se in soil-plant system with respect to applied levels and speciation, which ultimately affect Se status in humans. Based on available relevant literature, this review traces a plausible link among (i) Se levels, sources, speciation, bioavailability, and effect of soil chemical properties on selenium bioavailability/speciation in soil; (ii) role of different protein transporters in soil-root-shoot transfer of Se; and (iii) speciation, metabolism, phytotoxicity and detoxification of Se inside plants. The toxic and beneficial effects of Se to plants have been discussed with respect to speciation and toxic/deficient concentration of Se. We highlight the significance of various enzymatic (catalase, peroxidase, superoxide dismutase, ascorbate peroxidase, glutathione peroxidase) and non-enzymatic (phytochelatins and glutathione) antioxidants which help combat Se-induced overproduction of reactive oxygen species (ROS). The review also delineates Se accumulation in edible plant parts from soils containing low or high Se levels; elucidates associated health disorders or risks due to the consumption of Se-deficient or Se-rich foods; discusses the potential role of Se in different human disorders/diseases.

Complexation and coagulation of plant-derived dissolved organic matter (DOM) by metal cations are important biogeochemical processes of organic matter in aquatic systems. Thus, coagulation and fractionation of DOM derived from aquatic plants by Ca(II), Al(III), and Fe(III) ions were investigated. Metal ion-induced removal of DOM was determined by analyzing dissolved organic carbon in supernatants after addition of these metal cations individually. After additions of metal ions, both dissolved and coagulated organic fractions were characterized by use of fluorescence excitation emission matrix-parallel factor (EEM-PARAFAC) analysis and Fourier transform infrared (FT-IR) spectroscopy. Addition of Ca(II), Fe(III) or Al(III) resulted in net removal of aquatic plant-derived DOM. Efficiencies of removal of DOM by Fe(III) or Al(III) were greater than that by Ca(II). However, capacities to remove plant-derived DOM by the three metals were less than which had been previously reported for humic materials. Molecular and structural features of plant-derived DOM fractions in associations with metal cations were characterized by changes in fluorescent components and infrared absorption peaks. Both aromatic and carboxylic-like organic matters could be removed by Ca(II), Al(III) or Fe(III) ions. Whereas organic matters containing amides were preferentially removed by Ca(II), and phenolic materials were selectively removed by Fe(III) or Al(III). These observations indicated that plant-derived DOM might have a long-lasting effect on water quality and organisms due to its poor coagulation with metal cations in aquatic ecosystems. Plant-derived DOM is of different character than natural organic matter and it is not advisable to attempt removal through addition of metal salts during treatment of sewage.

Threatened species are susceptible to irreversible population decline caused by adverse sub-lethal effects of chemical contaminant exposure. It is therefore vital to develop the necessary tools to predict and detect these effects as early as possible. Biomarkers of contaminant exposure and effect are widely applied to this end, and a significant amount of research has focused on development and validation of sensitive and diagnostic biomarkers. However, progress in the use biomarkers that can be measured using non-destructive techniques has been relatively slow and there are still many difficulties to overcome in the development of sound methods. This paper systematically quantifies and reviews studies that have aimed to develop or validate non-destructive biomarkers in wildlife, and provides an analysis of the successes of these methods based on the invasiveness of the methods, the potential for universal application, cost, and the potential for new biomarker discovery. These data are then used to infer what methods and approaches appear the most effective for successful development of non-destructive biomarkers of contaminant exposure in wildlife. This review highlights that research on non-destructive biomarkers in wildlife is severely lacking, and suggests further exploration of in vitro methods in future studies.