Heavy metals are a hazard to marine fauna and human health. In this study we assess stable isotopes and metal content in Prionace glauca and Isurus oxyrinchus and analyse these results within and among other species and across regions and geographical areas. Also, we evaluate their suitability, together with Raja clavata and Galeorhinus galeus, as Mid-Atlantic bioindicators. Prionace glauca and I. oxyrinchus shared the same trophic level in a pelagic food web and did not present significant differences between genders or metals, except for As. Arsenic and Hg accumulated while Cd and Pb were not detected. One I. oxyrinchus presented Hg values above regulatory limits. A high Hg exposure was associated with I. oxyrinchus since its maximum weekly intake was exceeded. Elasmobranchs can be used as metal sentinels, each presenting different key features which defines a good marine bioindicator, allowing long-term monitoring at different temporal and spatial scales.

As part of an investigation of the effects of water quality from dredging/natural resuspension on reefs, the effects of suspended sediment concentrations (SSCs) (0, 30, 100mgL−1) and light (~0, 1.1, 8.6molphotonsm−2d−1) were examined alone and in combination, on the corals Acropora millepora, Montipora capricornis and Porites spp. over an extended (28d) period. No effects were observed at any sediment concentrations when applied alone. All corals in the lowest light treatments lost chlorophyll a and discoloured (bleached) after a week. Coral mortality only occurred in the two lowest light treatments and was higher when simultaneously exposed to elevated SSCs. Compared to water quality data collected during large dredging programs and natural resuspension events (and in the absence of sediment deposition as a cause-effect pathway) these data suggest the light reduction associated with turbidity poses a proportionally greater risk than effects of elevated SSCs alone.

Crown-of-thorns starfish, Acanthaster planci (COTS), predation is a major cause of coral reef decline, but the factors behind their population outbreaks remain unclear. Increased phytoplankton food resulting from eutrophication is suggested to enhance larval survival. We addressed the hypothesis that larval success is associated with particular chl-a levels in tightly controlled larval:algal conditions. We used chl-a conditions found on coral reefs (0.1–5.0μgchl-aL−1), including nominal threshold levels for disproportionate larval success (≥1.0μgchl-aL−1). High success to the juvenile occurred across an order of magnitude of chl-a concentrations (0.5–5.0μgchl-aL−1), suggesting there may not be a narrow value for optimal success. Oligotrophic conditions (0.1μgchl-aL−1) appeared to be a critical limit. With a review of the evidence, we suggest that opportunistic COTS larvae may be more resilient to low food levels than previously appreciated. Initiation of outbreak populations need not require eutrophic conditions.

The Apulia region in Italy has the longest Adriatic coastline; thus, maritime tourism is the driving force for its economic development. Pollution risk for four representative touristic ports of the region was assessed by determining the concentrations of 10 metals, 16 polycyclic aromatic hydrocarbons (PAHs) congeners, and the main nutrients. The cumulative mean Effects Range–Median quotient (mERMq) was used to assess the hazard degree, while the distribution patterns and content ratios of different PAH sediment concentrations were investigated to identify the pollution sources. Principal component analyses indicated an anomalous pollution trend for one of the small touristic ports assessed; this trend emerged from contamination by heavy metals and PAHs to a larger extent than expected, considering the main activity in this port, especially in its inner basin. The reason of this anomaly is thought to be the hydrodynamic and/or other stress factors.

An increase in marine artificial constructions has been proposed as a major cause of jellyfish blooms, because these constructions provide additional substrates for organisms at the benthic stage (polyps), which proliferate asexually and release a large amount of free-swimming medusae. These hard surfaces are normally covered by fouling communities, the components of which have the potential to impede the proliferation of polyps. In this study, we report an in situ experiment of polyp survival of four large scyphozoan species found in East Asian marginal seas that were exposed to biofouling, a universal phenomenon occurring on marine artificial constructions. Our results showed that the polyps of three species (Nemopilema nomurai, Cyanea nozaki, and Rhopilema esculentum) attached to the artificial surfaces were completely eliminated by biofouling within 7–8months, and only those of moon jellyfish (Aurelia sp.1) in the upper layers could multiply on both artificial materials and other organisms (e.g., ascidians and bryozoans). Fouling-associated competition and predation and suppressed asexual reproduction of podocysts were observed to contribute to the loss of polyps. This study shows that the natural distribution of polyps is defined by the biofouling community that colonizes the surfaces of artificial constructions. Consequently, the contribution of marine constructions to jellyfish bloom is limited only to the ability of the jellyfish species to reproduce asexually through budding and inhabit solid surfaces of fouling organisms in addition to inhabiting original artificial materials.We anticipate that fragile polyps will colonize and proliferate in harsh environments that are deleterious to biofouling, and we propose special attention to polyps in antifouling practices for excluding the possibility that they occupy the available ecological space.

Phytoplankton assemblages related to environmental factors and ecological status of the Gemlik Gulf were investigated between June 2010 and May 2011. A total 155 phytoplankton species were detected and 6 taxa (Amphisolenia laticincta, Archaeperidinium minutum, Cochlodinium sp., Gynogonadinium aequatoriale, Heterocapsa rotundata and Metaphalacroma sp.) were new records for the Turkish Seas. The lowest and highest total phytoplankton abundance among the sampling units (depths) was recorded in April 2011 (7.4×103cellsL−1) and July 2010 (251.8×103cellsL−1). Local small patches of visible red tide events were detected especially in the gulf, although a phytoplankton bloom was not observed. The water column was well stratified in the early autumn and well mixed in the early spring according to stratification index values. Surface nutrient concentrations increased especially at stations located inside of the gulf. The limiting effect of silicate was observed in early, mid-summer and early winter periods while the nitrogen was the limiting nutrient in the gulf during the whole sampling period. In the Gulf, low water quality-high mesotrophic and bad water quality-eutrophic status, high quality and low trophic level were generally detected according to Chl a, dissolved oxygen and trophic index. However, indices developed to determine the trophic level and water quality of the Mediterranean Sea can give unexpected results about the current environmental quality status when it is applied to the Marmara Sea which has limited photic zone by the halocline-pycnocline and thermocline.

Terminal settling velocity of around 600 microplastic particles, ranging from 0.5 to 5mm, of three regular shapes was measured in a series of sink experiments: Polycaprolactone (material density 1131kgm−3) spheres and short cylinders with equal dimensions, and long cylinders cut from fishing lines (1130–1168kgm−3) of different diameters (0.15–0.71mm). Settling velocities ranging from 5 to 127mms−1 were compared with several semi-empirical predictions developed for natural sediments showing reasonable consistency with observations except for the case of long cylinders, for which the new approximation is proposed. The effect of particle's shape on its settling velocity is highlighted, indicating the need of further experiments with real marine microplastics of different shapes and the necessity of the development of reasonable parameterization of microplastics settling for proper modeling of their transport in the water column.

Trace element concentration in the beach placer mining areas of Kanyakumari coast, South India was assessed. Sewage and contaminated sediments from mining sites has contaminated the surface sediments. Enrichment factor indicates moderately severe enrichment for Pb, minor enrichment for Mn, Zn, Ni, Fe and no enrichment for Cr and Cu. The Igeo values show higher concentration of Pb ranging in the scale of 3–4, which shows strong contamination due to high anthropogenic activity such as mining and terrestrial influences into the coastal regions. Correlation coefficient shows that most of the elements are associated with each other except Ni and Pb. Factor analysis reveals that Mn, Zn, Fe, Cr, Pb and Cu are having a significant loading and it indicates that these elements are mainly derived from similar origin. The cluster analysis clearly indicated that the mining areas are grouped under cluster 2 and non-mining areas are clustered under group 1.

Estuaries are areas of both freshwater and seawater that are partially enclosed with contact to the open sea and a flow of fresh water. Although the Jiulong River Estuary has a relatively small catchment, this area was found to exhibit high nutrient fluxes. The nutrient fluxes showed obvious fluctuations for different years. The Jiulong River Estuary was predominantly P-limited, and was slowly moving towards higher DIN:DIP and DSi:DIP ratios as the nitrate concentrations increased. The high nutrient fluxes into the estuary may affect estuarine ecosystems by the alteration of DO concentrations in bottom waters, causing harm to benthic fauna due to a lack of oxygen, triggering algal blooms. Additionally, the Jiulong River Estuary was slowly moving towards lower DSi:DIN and DSi:DIP ratios along with the change of time scales, which caused nutrient limitation of phytoplankton growth as P and Si levels decreased and became more limiting.

We used three stable reactors to investigate the rates of nitrate removal coupled with iron cycle and the subsequent influence of the reaction on bacterial communities. The iron-reducing bacterium Klebsiella sp. FC61 was immobilized on the reactor columns of the experimental groups B (only Klebsiella) and C (Klebsiella+magnetite). With the fluctuation of Fe2+ to Fe3+ (iron cycle), the average nitrate removal efficiency increased from 73.22% to 93.91% and 86.92% to 97.84% in groups B and C, respectively, as the influent nitrate concentration decreased from 40 to 10mg/L. However, the average rate of nitrate removal showed the opposite trend (from 2.08mg/L/h to 0.67mg/L/h and 2.41mg/L/h to 0.69mg/L/h in groups B and C, respectively) as the influent nitrate concentration decreased. Analysis of microbial distribution and community structures indicated that the population of Klebsiella sp. increased in groups B (from 18.21% to 41.21%) and C (from 25.43% to 46.80%) and contributed to the effective removal of nitrate in the reactors.