Precursors that can be transformed into perfluoroalkyl acids (PFAAs) have not been investigated in detail. In this study, the levels of potential PFAA precursors in the Jiaozhou Bay, inflowing rivers, and STP (sewage treatment plant) effluents were investigated by converting all PFAA precursors into perfluorinated carboxylic acids (PFCAs) by chemical oxidation. The significance of controlling PFAA precursors was indicated by the ratios of PFCAs converted by the oxidative treatment of precursors to PFAAs before oxidation (∑△[PFCAC4-C12]/∑[PFAA]before oxidation). The higher levels of △[PFCAC4-C12] (average = 18.89 ng/L) and lower ratios (∑△[PFCAC4-C12]/∑[PFAA]before oxidation, average = 0.21) were revealed in the STP effluents rather than in the water of the Jiaozhou Bay and rivers, which implied the precursors conversion during the sewage treatment process. The concentrations of △[PFCAs] and the aforementioned ratios showed apparent spatial and temporal differences. These results indicated that STPs were the important sources of precursors to other water bodies.

Seawater passive sampling with Polar Organic Chemical Integrative Samplers (POCIS) combined with Gaschromatography-Mass Spectrometry analysis were employed as a tool for screening unknown contaminants in a complex Ligurian marine coastal area.The untargeted approach allowed recognizing different classes of compounds, mainly hydrocarbons from C20 to C30. Besides, two chemicals, deriving from anthropic activities, N-butylbenzenesulfonamide (NBBS) and diphenyl sulfone (DPS), were identified and quantified in all samples. Both analytes showed decreasing concentrations from the more confined site to the outer one. The oceanographic characterization of the area performed with multiparametric probes provided useful information, in agreement with chemical analyses. The presence of NBBS and DPS in the site presenting lower continental inputs demonstrated the usefulness of the integrative sampling approach for temporal and spatial monitoring, especially for low level and/or short-term pollution events that traditional monitoring can fail to detect.

Atlantic Bigeye (Priacanthus arenatus) is a demersal species from the Priacanthidae family with little literature relating to its biology and catch aspects. Due to this lack of research, the focus of this effort was to describe the feeding preferences of Atlantic Bigeye and to evaluate the influence of plastic debris derived from the local fisheries activities on its diet. The most important items were Corophiidae, Penaeidae, Actinopterygii, Isopoda, Cephalopoda, Policheta and plastic. Plastic was present in 49.17% of the stomachs analyzed. A total of 210 plastic fragments were found, and 63% were derived from fishing. Of those, 55% were derived from paint fragments from vessels and 8% from synthetic fibers (PA). The results suggest that plastic fragments found in stomachs are related to the species' natural diet and that this debris is locally deposited in the coastal environment. Fishing resources appear to have been affected by this local marine pollution.

Effects of heating, ultraviolet (UV), ultrasound (US), hydrogen peroxide (H2O2) and freshwater, and the combined treatments on inactivation of cysts of Scrippsiella trochoidea and cysts in sediment suspension were studied. Heating was the most efficient way to inactivate cyst germination, and cysts were completely inactivated at 38°C for 5h. UV, US, and freshwater efficiently inhibited but could not completely inactivate cyst germination. Effects of heating, UV, and US on cyst germination decreased for cysts in sediment, and germination rates increased by 6.7–48% compared to the same treatment for cysts without sediment. H2O2 significantly inhibited cyst germination, but complete inactivation occurred at high concentration for long duration (100mg/L, 6d). The combined treatments were more effective, especially the combinations of heating and UV. The results suggested that heating might be a feasible way for ballast water treatment especially after combined with filtration and UV.

Following the discovery of potential chronic perfluoroalkyl substances (PFAS) contamination of Tilligerry Creek, Port Stephens (New South Wales Australia), sampling was undertaken to confirm the presence, extent and levels of contamination in commercial oyster crops of Sydney Rock Oyster (Saccostrea glomerata) and Pacific Oyster (Crassostrea gigas) grown within the estuary. Among a range of PFAS tested, only perfluorooctane sulfonate (PFOS) was detected. Concentrations of PFOS in oyster tissues for S. glomerata ranged from 1.6μgkg⁻¹ ww (wet weight) to below the limit of reporting of 0.3μgkg⁻¹ ww, with concentrations generally decreasing toward the lower reaches of the estuary. The sample of C. gigas tested had a PFOS concentration of 0.71μgkg⁻¹ ww that was consistent with concentrations observed in nearby S. glomerata. For harvest size (50–60g) S. glomerata, both holding contaminated oysters in a depuration system, and relocation to a non-contaminated area, saw significant reductions in the tissue PFOS concentrations. For oysters held in a depuration system, PFOS depurated at a rate of 0.008h⁻¹ (0.004–0.019h⁻¹; 90% CI), which corresponded with a depuration half-life of 87h (35–155h; 90%). A more conservative model (fitted to data that assumed concentrations<LOR were equal 0.5·LOR) predicted a depuration half-life of 131h. PFOS concentrations had fallen to below detectable limits within 162h. Similar decreases were observed in relocated oysters.

Shore nourishment is considered an effective soft coastal protection measure for sandy shorelines. However, sand demand and costs are high, especially as nourishment has to be repeated regularly due to ongoing erosion. Seagrass meadows are able to trap and stabilise sediment by reducing bed shear stress. Moreover, they reduce flow velocity and wave energy in regions beyond their boundaries. Especially small species may not provide these ecosystem services sufficiently to protect shorelines from erosion, but they may stabilise beach profiles enough to increase nourishment intervals. This review discusses the potential benefits of integrating ecosystem services provided by seagrass meadows, both existing and newly planted, in nourishment plans, and also addresses potential limitations such as unsuitable hydrodynamic conditions and seasonality. Finally, it highlights knowledge gaps that should be addressed by interdisciplinary research to improve nourishment plans and use seagrass ecosystem services to their full potential.

Surface sediments contamination (heavy metals, organochlorine pesticides, polycyclic aromatic hydrocarbons, polychlorinated dibenzodioxins and dibenzofurans) and benthic community of the Valli di Comacchio, were analysed from 2002 to 2013. Along the studied period, most of analysed pollutants did not exceed thresholds for Good chemical status of sediments. In 2008, a peak of contamination was observed, with total PAHs and OCPs exceeding their threshold. Considering metals, Ni and Cr exceeded their thresholds, but not the background levels for the area, suggesting natural enrichment; conversely Pb exceeded background levels for the area in many samples, but it exceeded its sediment quality thresholds only in few samples (2006, 2009, 2011). Conversely, the ecological status evaluated though AMBI and M-AMBI, was below the Good/Moderated thresholds established by WFD in most of the studied years. In the 11 yrs-study period, the benthic community showed a very weak response to chemical contamination.

Microplastics are recognized as a growing threat for the marine environment that may even affect areas generally considered pristine. In this work we surveyed the microplastic contamination in the Faafu Atoll (Maldives, Indian Ocean) across twelve sampling station, located either inside or outside the reef rim. Sediments and seawater samples were collected. Despite the remoteness of the atoll, the scarce local population and low touristic annual afflux, the detected average abundance were 0.32 ± 0.15 particles/m3 in the surface water and 22.8 ± 10.5 particles/m2 in the beach sediments. Polymers identified through Fourier-Transform Infrared spectroscopy were mostly polyethylene, polypropylene, polystyrene, polyvinylchloride, polyethyleneterephtalate, and polyamide. Elastomeric residues and charred microparticles were also found. In particular, the charred microparticles were prevalently located nearby the inhabited island and they might be considered a peculiarity of the area, related to local practice of burning plastic waste at the shoreline.

Fifteen polycyclic aromatic hydrocarbons (PAHs) were detected in seawater and atmosphere of Bransfield Strait. The concentration of ∑15[PAH] in the atmosphere ranged from 3.75 to 8.53 ng m−3, and three-ring PAHs were the most abundant compounds. Dissolved ∑15[PAH] in seawater ranged from 5.42 to 34.37 ng L−1, and the level of PAHs was markedly different on each side of the strait. The air–sea gas exchange process and molecular diagnostic ratios were calculated, results showed that the environmental behavior of PAHs was net deposition along this cruise. Given the changes in global transport routes of pollutants under global warming, the role of long-range transport (LRT) may be enhanced. Taking the Antarctic as a sink of PAHs due to the LRT and net deposition, PAHs will continue to load into the seawater of this area via atmospheric deposition, which contributes to improving our understanding of the environmental behavior of PAHs.

Fish ingestion of microplastic has been widely documented throughout freshwater, marine, and estuarine species. While numerous studies have quantified and characterized microplastic particles, analytical methods for polymer identification are limited. This study investigated the applicability of pyr-GC/MS for polymer identification of microplastics extracted from the stomach content of marine fish from the Texas Gulf Coast. A total of 43 microplastic particles were analyzed, inclusive of 30 fibers, 3 fragments, and 10 spheres. Polyvinyl chloride (PVC) and polyethylene terephthalate (PET) were the most commonly identified polymers (44.1%), followed by nylon (9.3%), silicone (2.3%), and epoxy resin (2.3%). Approximately 42% of samples could not be classified into a specific polymer class, due to a limited formation of pyrolytic products, low product abundance, or a lack of comparative standards. Diethyl phthalate, a known plasticizer, was found in 16.3% of the total sample, including PVC (14.3%), silicone (14.3%), nylon (14.3%), and sample unknowns (57.2%).