137 coastal sites located along the Caribbean coast of Colombia were surveyed to determine scenic quality, litter content, and typology. Scenic evaluation categorized sites into five classes. 26 appeared in Class I; 18 in Class II; 19 in Class III; 30 in class IV; and 44 in Class V. Beach type was categorized into urban (31), resort (18), rural (46), village (32) and remote (10). Litter gave 17 sites an “A” grade (excellent); 34 sites a “B” grade; 53 sites a “C” grade and 33 locations a “D” grade (poor). Almost all sites surveyed have a low scenic quality and also significant litter content. Currently, litter directly produces aesthetic problems along the study area, and improvements are necessary to favor coastal scenic quality. Stakeholders should make a significant effort to improve the scenic human parameters along the study area, litter removal and prevention being the most important.

Semi-enclosed basins are environmentally dynamic and some of the most anthropogenically affected components of the coastal realm. They can reflect various environmental impacts, thus qualifying as natural laboratories to study these impacts. The Gulf of Khambhat (GoK) is such a system where analysis of in situ parameters indicated polluted conditions. The sources of various contaminants were deciphered. Though there are considerable inputs of pollutants, the assimilative capacity of the GoK holds good with high Dissolved Oxygen (DO) (6–9.3 mg/L) content as revealed in situ and in silico. High Biochemical Oxygen Demand (BOD) and marginal ammonia contamination prevail in the region. Simulations revealed that the rivers bring in a considerable amount of nitrate, organic material and phosphate into the Gulf. Considering the prevailing environmental condition, the current study posits to have regular water quality monitoring; and the carrying capacity of the Gulf should be assessed before the authorization of anthropogenic activities.

Developing countries like India require proper control strategies for reducing the enormous premature mortality associated with air pollution. Air quality models, in addition to helping to understand the severity of air pollution by providing the pollutant concentrations, also give knowledge of the sources. Previous local and regional air quality modeling studies carried out in India are reviewed in this current study with a goal of understanding the current gaps and exploring future directions. Studies carried out in different parts of India during past decade were precisely documented in this study using methodical Scopus, Web of Science, and Google searches. Majority of the air quality studies are concentrated in megacities leaving behind the small cities which require greater attention in future. While most of the modeling studies were carried out in northern India, very few studies concentrated on central region of the country. Review of both local and regional numerical models showed the need for better emission inputs, while the statistical models inferred the need for proper selection of key tracers for source allocation. Irrespective of emission inventory and models used, particulate matter concentrations are under predicted in Delhi, which faces huge air pollution-related issues. Dust and traffic emissions are the major sources of particulate matter in India.

Municipal wastewater treatment plants (WWTPs) are conduits through which microplastics (MPs) are released into aquatic environments. However, the technical challenges in working with wastewater sample matrices have precluded reliable particle count budget calculations. We applied newly-adapted methods for MP collection and analysis to a study of a major WWTP serving a population of 1.3 million people near Vancouver, Canada. Suspected MP particles, including fibres, were counted and categorized using light microscopy in influent, primary effluent, secondary effluent, primary sludge and secondary sludge. Fourier Transform Infrared Spectroscopy (FT-IR) confirmed that just 32.4% of the suspected MPs were plastic polymers. Using FT-IR corrected data, we estimate that 1.76 ± 0.31 trillion MPs enter the WWTP annually, with 1.28 ± 0.54 trillion MPs settling into primary sludge, 0.36 ± 0.22 into secondary sludge, and 0.03 ± 0.01 trillion MPs released into the receiving environment. This corresponds to a retention of microplastics of up to 99% in the WWTP.

Wastewater disposal often has deleterious impacts on the receiving environment. Low dissolved oxygen levels are particularly concerning. Here, we investigate the impacts on dissolved oxygen and carbon chemistry of screened municipal wastewater in the marine waters off Victoria, Canada. We analyzed data from undersea moorings, ship-based monitoring, and remotely-operated vehicle video. We used these observations to construct a two-layer model of the nearfield receiving environment. Despite the lack of advanced treatment, dissolved oxygen levels near the outfalls were well above a 62 μmol kg⁻¹ hypoxic threshold. Furthermore, the impact on water column oxygen at the outfall is likely <2 μmol kg⁻¹. Dissolved inorganic carbon is not elevated and pH not depressed compared to the surrounding region. Strong tidal currents and cold, well-ventilated waters give Victoria's marine environment a high assimilative capacity for organic waste. However, declining oxygen levels offshore put water near the outfall at risk of future hypoxia.

To evaluate the integrated toxicity of metals in sediments of Jiaozhou Bay, we exposed clam (Ruditapes philippinarum) to sediments extracts obtained using of sediment extraction with deionised water adjusted to pH 4 which simulated the weak acidity in the digestive juice of clams and tested the selected biomarkers responses in clams for exposure over 15 days. At the same time, the contents of metals in sediments were assessed with method of the mean sediment quality guideline quotient (SQG-Q). The integrated biomarker response version 2 (IBRv2) was used to assess the integrated toxicity induced by metals in sediment extracts based on biomarkers response in clams: the results demonstrated that site S7 located in the mouth of Nanxin'an River show higher IBRv2 values compared to the other sites. The IBRv2 values exhibited the good consistency with SQG-Q values.

Microplastics, an emerging pollutant, are recognised as having a ubiquitous distribution in the environment. Currently several benthic sampling tools are being employed to collect subtidal marine sediment, however, there are no comparative studies on the efficiency of these tools to sample for microplastics or the subsequent extraction methods of microplastics from these marine sediments. This study addresses these knowledge gaps by comparing commonly applied benthic sampling tools (Van Veen grab, box corer, gravity corer) and a variety of density separation methods (elutriation column, sodium chloride solution, sodium tungstate dihydrate solution) for microplastic collection and processing.Each sampling tool was tested at the same station and the collected sediment was used to assess the extraction performance for the different density separation techniques. No statistically significant differences were found between the concentrations of microplastics extracted for any of the sampling tools. However, there were significant differences between the density separation methods using sodium tungstate dihydrate and sodium chloride solution and the elutriation method. This preliminary study provides evidence that the sampling tools tested are both suitable and proficient at determining the abundance of microplastics in sediments. Sodium tungstate dihydrate proved to be a novel and feasible option for dense liquid separation of microplastics in subtidal marine sediments. These results will allow for more confidence in data quality when comparing future surveys applying different benthic sampling tools.

Marine anthropogenic debris was sampled from two beaches on the remote South Pacific island Rapa Nui (Easter Island). Abundance, composition, and the attached fouling assemblages on stranded litter were analysed. Most litter (n = 172 items found) was composed of plastic material, and 34% of all litter items were fouled. The main fouling species was the encrusting bryozoan Jellyella eburnea. Transporting vectors were exclusively made from plastics and were mainly small items and fragments, probably stemming from the South Pacific Subtropical Gyre. We present the first report of Planes major, Halobates sericeus, and Pocillopora sp. on anthropogenic litter in the South Pacific.