The oxidative potential (OP) of atmospheric fine particulate matter (PM₂.₅) has been linked to organic content, which includes polycyclic aromatic hydrocarbons (PAHs). The OP of 135 individual PAHs (including six subclasses) was measured using the dithiolthreitol (DTT) consumption assay. The DTT assay results were used to compute the concentration of each PAH needed to consume 50% of the DTT concentration in the assay (DTT₅₀), and the reduction potential of the PAHs (ΔGᵣₓₙ). Computed reduction potential results were found to match literature reduction potential values (r² = 0.97), while DTT₅₀ results had no correlations with the computed ΔGᵣₓₙ values (r² < 0.1). The GINI equality index was used to assess the electron distribution across the surface of unreacted and reacted PAHs. GINI values correlated with ΔGᵣₓₙ in UPAH, HPAH, and OHPAH subclasses, as well as with all 135 PAHs in this study but did not correlate with DTT₅₀, indicating that electron dispersion is linked to thermodynamic reactions and structural differences in PAHs, but not linked to the OP of PAHs. Three ambient PM₂.₅ filters extracts were measured in the DTT assay, alongside mixtures of analytical standards prepared to match PAH concentrations in the filter extracts to test if the OP follows an additive model of toxicity. The additive prediction model did not accurately predict the DTT consumption in the assay for any of the prepared standard mixtures or ambient PM₂.₅ filter extracts, indicating a much more complex model of toxicity for the OP of PAHs in ambient PM₂.₅. This study combined computed molecular properties with toxicologically relevant assay results to probe the OP of anthropogenically driven portions of ambient PM₂.₅, and results in a better understanding of the complexity of ambient PM₂.₅ OP.

Nanoplastics (NPs) are becoming emerging pollutants of global concern. Understanding the environmental behavior of NPs is crucial for their environmental and human risk assessment. In this study, the aggregation and stability of polystyrene (PS) NPs were investigated under different hydrochemical conditions such as pH, salt type (NaCl, CaCl₂, Na₂SO₄), ionic strength (IS), and natural organic matter (NOM). The critical coagulation concentrations of PS NPs were determined to be 158.7 mM NaCl, 12.2 mM CaCl₂, and 80.0 mM Na₂SO₄. Ca²⁺ was more effective in destabilizing PS NPs, compared to Na⁺, owing to its stronger charge screening effect. In the presence of monovalent ions, NOM reduced aggregation through steric repulsion, whereas in the case of divalent ions, NOM induced aggregation through cation bridging. Initial and long-term stability studies demonstrated that, in waters with high IS and NOM content, NOM was the most significant factor affecting NPs aggregation. PS NPs would be highly suspended in all freshwaters, and even in wastewater, whereas they would aggregate rapidly and deposit in seawater. Finally, a statistical model was established to evaluate the hydrodynamic diameter of NPs in different waters. The results indicated the stability of PS NPs in natural aquatic environments and their potential for long-term transport.

Copper (Cu) is a vital micronutrient required for numerous fundamental biological processes, but excessive Cu poses potential detrimental effects on public and ecosystem health. However, the molecular details linking endoplasmic reticulum (ER) stress and apoptosis in duck renal tubular epithelial cells have not been fully elucidated. In this study, duck renal tubular epithelial cells exposed to Cu sulfate (CuSO₄) (0, 100 and 200 μM) and a PERK inhibitor (GSK2606414, GSK, 1 μM) for 12 h were used to investigate the crosstalk between ER stress and apoptosis under Cu exposure. Cell and ER morphological and functional characteristics, intracellular calcium (Ca²⁺) levels, apoptotic rates, ER stress and apoptosis-related mRNA and protein levels were examined. The results showed that excessive Cu could cause ER expansion and swelling, increase the expression levels of ER stress-associated genes (PERK, eIF2α, ATF4 and CHOP) and proteins (p-PERK and CHOP), induce intracellular Ca²⁺ overload, upregulate the expression levels of apoptosis-associated genes (Bax, Bak1, Caspase9 and Caspase3) and the cleaved-Caspase3 protein, downregulate Bcl-xl and Bcl2 mRNA levels and trigger apoptosis. PERK inhibitor treatment could ameliorate the above changed factors caused by Cu. In conclusion, these findings indicate that excessive Cu could trigger ER stress via activation of the PERK/ATF4/CHOP signaling pathway and that ER stress might aggravate Cu-induced apoptosis in duck renal tubular epithelial cells.

Effects of commercial sand mining on aquatic diversity are of increasing global concern, especially in parts of some developing countries. However, understanding of this activity on the diversity of macroinvertebrates remains focused on the α component of species diversity, rather than community functioning. Thus, there remains much uncertainty regarding how each component of taxonomic (TD) and functional (FD) diversity respond to the activity both in freshwater and marine environments. Here, we assessed the effect of sand dredging on α, β and γ components of TD and FD during different dredging periods based on the response of macroinvertebrate communities over 4 years in the second largest freshwater lake in China. After three years of active dredging, substantial reductions in each component (α, β and γ) of TD and FD were observed within the dredged area. Moreover, after one year of natural recovery, a distinct restoration was observed with an obvious return in multiple facets of TD and FD indices. No such changes were observed within the adjacent and reference areas. Decreases in the multiple components of TD and FD within the dredged area were most likely associated with the direct extraction of substrate and associated benthic fauna and indirect variations of the water and sediment environment (e.g., increases in water depth and decreases in %Clay). Furthermore, dispersal processes and mass effects mainly contributed to the maintenance of TD and FD during the dredged and recovery stages. In addition, the fast recovery of TD and FD was also related to the simple taxonomic structure and highly connected nature of the study area. Our results suggest that a more precise experimental design (BACI) should be pursued to avoid potentially confounding effects (e.g., natural disturbance) because the sensitivity of diversity indices depends upon different experimental designs. Moreover, measurement of the impacts of sand dredging on macroinvertebrate diversity can be undertaken within a rigorous framework for better understanding the patterns and processes of each component of TD and FD under the sand dredging disturbance.

The effects of voltage intensity on the nutrient removal performance and microbial community in the iron electrolysis-integrated aerobic granular sludge (AGS) system were investigated over a period of 15 weeks. Results revealed that the application outcomes of iron electrolysis for AGS systems relied on voltage intensity. When a constant voltage of 1.5 V was applied, the sludge granulation was most obviously accelerated with a specific growth rate of the sludge diameter of 0.078 day⁻¹, and the removal efficiencies of total nitrogen (TN) and total phosphorus (TP) increased by 14.1% and 20.2%, respectively, compared to the control reactor (without the iron electrolysis-integration). Moreover, the AGS developed at different voltages included different microbial communities, whose shifts were driven by the Fe content and the average diameter of AGS. Both heterotrophic nitrifiers and mixotrophic denitrifiers were significantly enriched in the AGS developed at 1.5 V, which effectively enhanced TN removal. Together with the response of the functional genes involved in Fe, N, and P metabolism, the electrolytic iron-driven nutrient degradation pathway was further elaborated. Overall, this study clarified the optimum voltage condition when iron electrolysis was integrated into the AGS system, and revealed the enhancement mechanism of this coupling technology on nutrient removal during the treatment of low-strength municipal wastewater.

The mechanisms of soot’s photochemistry are still unclear, especially, how the microstructure and composition of soot influence its photoactivity. In the current study, we started with the exploration of the microstructure of soot particles and gained new insights. The elemental-carbon fraction of soot (E-soot), considered the core component of soot and can reflect the intrinsic characteristics of soot, was extracted by organic solvents and characterized in terms of structure and chemical reactivity. The intrinsic structure of E-soot was found to be more analogous to reduced graphene oxide than to graphene, in terms of containing similar levels of defective sites such as oxygen-containing functional groups and environmentally persistent free radicals, as well as exhibiting similar optoelectronic performance. The generation of reactive oxygen species via an electron transfer pathway under visible light suggests that reduced graphene oxide-like E-soot can serve as a potential carbo-photocatalyst, which facilitates elucidating the mechanism of E-soot’s role during soot’s photochemical aging. Our study reveals the intrinsic structure of soot and its role in photo-triggered reactive oxygen species production, which is vital for atmospheric and health effects.

Copper oxide nanoparticles (CuO-NP) are used as an efficient alternative to conventional Cu in agriculture and might end up in soils. They show a high toxicity towards cells and microorganisms, but only low toxicity towards soil invertebrates. However, most existing soil ecotoxicological studies were conducted in a sandy reference soil and at test concentrations ≥100 mg Cu/kg soil. Therefore, there is a knowledge gap concerning the effect of soil texture on the toxicity of CuO-NP at lower, more realistic test concentrations. In our study, a sandy reference soil and three loamy soils were spiked with CuO-NP at up to four concentrations, ranging from 5 to 158 mg Cu/kg. We investigated 28-day reproduction as well as weight and Cu content after 14-day bioaccumulation and subsequent 14-day elimination for the springtail Folsomia candida. For the first time we analysed the size distribution of CuO-NP in aqueous test soil extracts by single particle-ICP-MS which revealed that the diameter of CuO-NP significantly increased with increasing concentration, but did not vary between test soils. Negative effects on reproduction were only observed in loamy soils, most pronounced in a loamy-acidic soil (−61%), and they were always strongest at the lowest test concentration. The observed effects were much stronger than reported by other studies performed with sandy soils and higher CuO-NP concentrations. In the same soil and concentration, a moderate impact on growth (−28%) was observed, while Cu elimination from springtails was inhibited. Rather than Cu body concentration, the diameter of the CuO-NP taken up, as well as NP-clay interactions might play a crucial role regarding their toxicity. Our study reports for the first time toxic effects of CuO-NP towards a soil invertebrate at a low, realistic concentration range. The results strongly suggest including lower test concentrations and a range of soil types in nanotoxicity testing.

Noise pollution is a pervasive factor that increasingly threatens natural resources and human health worldwide. In particular, large-scale changes in road networks have driven shifts in the acoustic environment of rural landscapes during the past few decades. Using sampling plots from the Spanish Landscape Monitoring System (SISPARES), 16 km² each, we modelled the spatio-temporal changes in road traffic noise pollution in Ecoregion 1 of Spain (approximately 66,000 km²). We selected a study period that was characterised by significant changes in the size of the road network and the vehicle fleet (i.e. between 1995 and 2014) and used standard and validated acoustic computation methods for environmental noise modelling (i.e. European Directive, 2002/49/EC) within sampling plots. We then applied a multiple linear regression to expand noise modelling throughout the whole of Ecoregion 1. Our results showed that the noise level increased by 1.7 dB(A) in average per decade in approximately 65% of the territory, decreased by 1.3 dB(A) per decade in about 33%, and remained unchanged in 2%. This suggests that road traffic noise pollution levels may not grow homogeneously in large geographical areas, maybe due to the concentration of large fast traffic flows on modern motorways connecting towns. Our research exemplifies how landscape monitoring systems such as cost-effective approaches may play an important role when assessing spatio-temporal patterns and the impact of anthropogenic noise pollution at large geographical scales, and even more so in a global context of constricted resources and limited availability of historical data on traffic and environmental noise monitoring.

In this study, a novel biosorbent is prepared from the pods of Bauhinia variegata is used for defluoridation of the fluoride contaminated water. It is an eco-friendly and economically feasible material. Comparison of adsorption capacity of Physically Treated Bauhinia (PTB) and Chemically Treated Bauhinia (CTB) are carried in this work. Characterization studies like SEM, EDS, FTIR, and XRD are executed to analyze surface morphology and functional groups in PTB and CTB. The experimental procedure was implemented in a batch process where the operating constraints such as dosage, pH, initial fluoride concentration, time, and temperature are varied to attain optimized efficiency. PTB and CTB yield an adsorption capacities of 10.90 mg/g and 15.45 mg/g respectively in the batch process. PTB adheres fluoride in monolayer formation whereas CTB forms multilayer adsorption. The adsorption process was described by the Pseudo first-order model to state the mechanism of physisorption. The negative values of thermodynamic parameters indicate spontaneity and favorable conditions for adsorption process. As CTB has a higher adsorption capacity than PTB, the batch study has been extended to column adsorption. Bed depth, initial fluoride concentration, and flow rate are the experimental variables used to acquire breakthrough curves. Simplified column models like Adam-Bohart, Thomas, and Yoon-Nelson models were analyzed. In column studies, Yoon-Nelson model fitted well in describing the process of adsorption. The maximum adsorption capacity acquired during the column process was found to be 1.176 mg/g with a bed depth of 5 cm and a flow rate of 5 ml/min. Thus, the innocuous and sustainable adsorbent is developed and serves as an excellent defluoridation agent.

Urban Heat Island (UHI) is posing a significant challenge due to growing urbanisations across the world. Green infrastructure (GI) is popularly used for mitigating the impact of UHI, but knowledge on their optimal use is yet evolving. The UHI effect for large cities have received substantial attention previously. However, the corresponding effect is mostly unknown for towns, where appreciable parts of the population live, in Europe and elsewhere. Therefore, we analysed the possible impact of three vegetation types on UHI under numerous scenarios: baseline/current GI cover (BGI); hypothetical scenario without GI cover (HGI-No); three alternative hypothetical scenarios considering maximum green roofs (HGR-Max), grasslands (HG-Max) and trees (HT-Max) using a dispersion model ADMS-Temperature and Humidity model (ADMS-TH), taking a UK town (Guildford) as a case study area. Differences in an ambient temperature between three different landforms (central urban area, an urban park, and suburban residential area) were also explored. Under all scenarios, the night-time (0200 h; local time) showed a higher temperature increase, up to 1.315 °C due to the lowest atmospheric temperature. The highest average temperature perturbation (change in ambient temperature) was 0.563 °C under HGI-No scenario, followed by HG-Max (0.400 °C), BGI (0.343 °C), HGR-Max (0.326 °C) and HT-Max (0.277 °C). Furthermore, the central urban area experienced a 0.371 °C and 0.401 °C higher ambient temperature compared with its nearby suburban residential area and urban park, respectively. The results allow to conclude that temperature perturbations in urban environments are highly dependent on the type of GI, anthropogenic heat sources (buildings and vehicles) and the percentage of land covered by GI. Among all other forms of GI, trees were the best-suited GI which can play a viable role in reducing the UHI. Green roofs can act as an additional mitigation measure for the reduction of UHI at city scale if large areas are covered.