The main objective of subsea mechanical dispersion (SSMD) is to reduce the oil droplet sizes from a subsea oil release, thereby influencing the fate and behaviour of the released oil in the marine environment. Subsea water jetting was identified as a promising method for SSMD and imply that a water jet is used to reduce the particle size of the oil droplets initially formed from the subsea release. This paper presents the main findings from a study including small-scale testing in a pressurised tank, via laboratory basin testing, to large-scale outdoor basin testing. The effectiveness of SSMD increases with the scale of the experiments. From a five-fold reduction in droplet sizes for small-scale experiments to more than ten-fold for large-scale experiments. The technology is ready for full-scale prototyping and field testing. Large-scale experiments performed at Ohmsett indicate that SSMD could be comparable to subsea dispersant injection (SSDI) in reducing oil droplet sizes. | publishedVersion

Marine pollution by lost, abandoned or otherwise discarded fishing gear (ALDFG) often has negative impact on the ecosystem through plastic pollution and continuous capture of marine animals, so-called “ghost fishing”. ALDFG in pot fisheries is associated with high ghost fishing risk. The snow crab (Chionoecetes opilio) pot fishery is conducted in harsh weather conditions increasing the risk of fishing gear loss. Due to plastic materials used in the pot construction, lost gear can most likely continue fishing for decades. This study presents a method to quantify ghost fishing efficiency relative to catch efficiency of actively fished pots. On average, the ghost fishing pots captured 8.29 % (confidence intervals: 4.33–13.73 %) target-sized snow crab compared to the actively fished pots, demonstrating that lost pots can continue fishing even when the bait is decayed. Given the large number of pots lost each year, the ghost fishing efficiency is a considerable challenge in this fishery. | publishedVersion

Plastic debris is a significant threat to marine and coastal ecosystems. Previous research found that waves, wind, as well as density, size, and shape of microplastics, drive their transport and dispersion. In this paper, a set of laboratory experiments on the effect of waves and wave-induced currents on the input rate and cross-shore transport and dispersion of different types of plastic debris, including the macro and mesosizes, in addition to microplastics is presented. 15 plastic-debris types characterized by different sizes, shapes, and densities, including facemasks, were analyzed under regular and irregular wave conditions. The results show that input and transport rates of plastics depend on their terminal velocities and wave steepness. Plastics with higher settling velocities under less-steep wave conditions are likely to escape coastal entrapment and end up in the breaking zone. However, plastics with greater buoyancy rates under steeper waves show a predominant accumulation closer to the shoreline. | P.N. is supported by a Margarita Salas post-doctoral fellowship funded by 638 European Union-NextGenerationEU,Ministry of Universities and Recovery Trans639 formation and Resilience Plan, through a call fromthe University of Cantabria. The 640 financial support from the Government of Cantabria through the FÉNIX Program 641 (ID 2020.03.03.322B.742.09) is warmly acknowledged. We acknowledge M.S. and the IHLab-Hydro team for all the technical support.

Modeling studies illustrate the potential for long-range transport of plastics into the Arctic, although the degree to which this occurs remains relatively undocumented. We utilised a teaching exercise at a UArctic summer school graduate course in Nuuk, Greenland to conduct a preliminary in-depth analysis of beach litter sources in the Nuup Kangerlua fjord. Students and instructors collected and analysed 1800 litter items weighing 200 kg from one location in the fjord and another at its mouth. The results suggest a predominance of local sources to macrolitter, rather than long-range transport from Europe. Fisheries-related items and rope were common. Packaging which could be identified was largely suspected to be products distributed in Greenland, and soft plastics, which rarely disperse far from its source, were also common. The results suggest local measures to reduce mismanaged waste and emissions from fisheries are important for reducing marine litter in West Greenland. | publishedVersion

The main objective with subsea mechanical dispersion (SSMD) is to influence the fate of an oil spill in the marine environment by significantly reducing oil droplet sizes from subsea release of oil. Earlier studies have indicated that the capability of SSMD to reduce oil droplet sizes is comparable to subsea dispersant injection (SSDI). Earlier testing of SSMD has mainly used a low viscus paraffinic oil. Focus for this study was to study SSMD and SSDI effectiveness using five oil types spanning out a wide variation of relevant oil properties. Effectiveness was quantified as the reduction in oil droplet sizes measured by a Silhouette camera. Testing of the two technologies were completed in the same experiment on a simulated subsea release. The results show a variation in effectiveness for both technologies as a function of oil properties. SSMD and SSDI showed comparable effectiveness for all oils tested. | publishedVersion

The production and consumption of plastic products had been steadily increasing over the years, leading to more plastic waste entering the environment. Plastic pollution is ubiquitous and comes in many types and forms. To enhance or modify their properties, chemical additives are added to plastic items during manufacturing. The presence and leakage of these additives, from managed and mismanaged plastic waste, into the environment are of growing concern. In this study, we gauged, via an online questionnaire, expert knowledge on the use, characteristics, monitoring and risks of plastic additives to the marine environment. We analysed the survey results against actual data to identify and prioritise risks and gaps. Participants also highlighted key factors for future consideration, including gaining a deeper understanding of the use and types of plastic additives, how they leach throughout the entire lifecycle, their toxicity, and the safety of alternative options. More extensive chemical regulation and an evaluation of the essentiality of their use should also be considered. | publishedVersion

Microplastics (MPs) have become a global issue as they are omnipresent in the ocean. Fish ingesting MPs through feed could be affected in their physiological function, e.g., disrupted enzyme production and function, reduction of feeding and reproductive failure. This study assessed the effects of feed containing naturally weathered MPs from the Oslofjord (Norway) on the reproductive physiology of Atlantic cod (Gadus morhua). Farmed cod broodstock were fed either control (C-diet) or feeds containing 1% microplastic (MP-diet) starting nine months prior to spawning, from June until May. No major differences were found between diet groups in overall biometrics or gonad histology. Sex steroid levels (testosterone, 11-ketotestosterone and 17β-estradiol) resulted in expected profiles increasing over time without any significant differences between treatments. Gene expression levels of the steroidogenic enzyme 20β-hydroxysteroid dehydrogenase (20β-hsd) and vitellogenin1 (vtg1) showed significant differences between dietary treatments with lower expression in the control group. This can be a direct effect of MPs, but endocrine disrupting effects of potentially leachable plastic additives cannot be completely ruled out. Thus, these enzymes could be indicators of exposure to contaminants that disrupt sexual maturation by affecting the production of primarily maturation-inducing steroid. Although the concentration of MPs employed in this study may not be high enough to elicit any observable short-term biological effects, the observed gene expression suggests that long-term consequences should be considered caused by an expected increase of MPs in marine environments. | publishedVersion