Selection of poplar species with greater Cd tolerance and exploiting the physiological mechanisms involved in Cd tolerance are crucial for application of these species to phyto-remediation. The aim of this study is to investigate variation in Cd tolerance among the six poplar species and its underlying physiological mechanisms. Cuttings of six Populus species were cultivated for 10 weeks before exposure to either 0 or 200 μM CdSO₄ for 20 days. Gas exchange in mature leaves was determined by a portable photosynthesis system. Cd concentrations in tissues were analyzed by a flame atomic absorbance spectrometry. Subsequently, Cd amount per plant, bio-concentration factor (BCF) and translocation factor (T f) were calculated. Nonenzymatic compounds and activities of antioxidative enzymes in tissues were analyzed spectrophotometrically. Cd exposure caused decline in photosynthesis in four poplar species including Populus cathayana (zhonghua 1). Among the six species, P. cathayana (zhonghua 1) displayed the highest Cd concentrations in tissues, the largest Cd amount in aerial parts, the highest BCF in aerial parts and T f under Cd exposure. Under Cd stress, increases in total soluble sugars in roots but decreases in starch in roots, wood, and leaves of P. cathayana (zhonghua 1) were found. Induced O ₂ •⁻ and H₂O₂ production in roots and leaves, and increases in free proline, soluble phenolics, and activities of antioxidative enzymes were observed in P. cathayana (zhonghua 1). Based on results of this pot experiment, it is concluded that P. cathayana (zhonghua 1) is superior to other five species for Cd phyto-remediation, and its well-coordinated physiological changes under Cd exposure confer the great Cd tolerance of this species.

Chronic exposure to chromium (Cr) and nickel (Ni) has long been recognized as being capable to increase head and neck cancer (HNC) incidence among exposed human populations. This study represents the first biomonitoring of Cr and Ni exposure in Tunisia and focuses on a possible association with HNC risk. The aim of the present study was to evaluate the concentrations of Cr and Ni in the blood of HNC patients and controls. Metals blood levels of 169 HNC patients and 351 controls were determined using a Perkin-Elmer Analyst 800 Atomic Absorption Spectrometer. Mean blood levels of Cr and Ni in HNC cases (52.15 and 111.60 μg/L, respectively) were significantly higher than those of controls (37.04 and 30.50 μg/L, respectively). Cases' blood levels of Cr and Ni were significantly higher than those of controls after controlling for the other risk factors of HNC, including smoking, shisha consumption, occupational exposure, and nearby environment (P < 0.05). Among these risk factors, smoking and occupational exposure presented the most significant association with HNC (odds ratio (OR) = 6.54 and 7.66, respectively, P < 0.001). Cr and Ni levels in blood sample of cases and controls that are smoker/occupationally exposed were higher than that of non-smoker/non-occupationally exposed (P < 0.05). Smokers who are occupationally exposed present the most significant association with HNC (OR = 25.08, P < 0.0001). High levels of blood Cr (OR = 2.09) and high levels of blood Ni (OR = 8.87) were strongly associated with HNC after other potential confounders were controlled (P = 0.004 and P < 0.0001, respectively). This study suggested a potential role of Cr and Ni in the mechanism of HNC development.

With the use of cost-effective natural materials, biosorption is considered as an ecological tool that is applied worldwide for the remediation of pollution. In this study, we proposed Lemna gibba biomass (LGB), a lignocellulosic sorbent material, for the removal of two textile dyes, Direct Red 89 (DR-89) and Reactive Green 12 (RG-12). These azo dyes commonly used in dying operations of natural and synthetic fibres are the most important pollutants produced in textile industry effluents. For this purpose, batch biosorption experiments were carried out to assess the efficacy of LGB on dye treatment by evaluating the effect of contact time, biomass dosage, and initial dye concentration. The results indicated that the bioremoval efficiency of 5 mg L⁻¹ DR-89 and RG-12 reached approximately 100 % after 20 min of the exposure time; however, the maximum biosorption of 50 mg L⁻¹ DR-89 and 15 mg L⁻¹ RG-12 was determined to be about 60 and 47 %, respectively. Fourier transform infrared spectroscopy used to explain the sorption mechanism showed that the functional groups of carboxylic acid and hydroxyl played a major role in the retention of these pollutants on the biomass surface. The modelling results using Freundlich, Langmuir, Temkin, Elovich, and Dubini Radushkevich (D-R) isotherms demonstrated that the DR-89 biosorption process was better described with the Langmuir theory (R ² = 0.992) while the RG-12 biosorption process fitted well by the D-R isotherm equation (R ² = 0.988). The maximum biosorption capacity was found to be 20.0 and 115.5 mg g⁻¹ for DR-89 and RG-12, respectively, showing a higher ability of duckweed biomass for the bioremoval of the green dye. The thermodynamic study showed that the dye biosorption was a spontaneous and endothermic process. The efficacy of using duckweed biomass for the bioremoval of the two dyes was limited to concentrations ≤50 mg L⁻¹, indicating that L. gibba biomass may be suitable in the refining step of textile effluent treatment.

Preterm birth (PTB) is a growing public health problem potentially associated with ambient air pollution. Gasoline service stations can emit atmospheric pollutants, including volatile organic compounds potentially implicated in PTB. The objective of this study was to evaluate the relationship between residential proximity to gasoline service stations and PTB. Singleton live births on the Island of Montreal from 1994 to 2006 were obtained (n = 267,478). Gasoline service station locations, presence of heavy-traffic roads, and neighborhood socioeconomic status (SES) were determined using a geographic information system. Multivariable logistic regression was used to analyze the association between PTB and residential proximity to gasoline service stations (50, 100, 150, 200, 250, and 500 m), accounting for maternal covariates, neighborhood SES, and heavy-traffic roads. For all distance categories beyond 50 m, presence of service stations was associated with a greater odds of PTB. Associations were robust to adjustment for maternal covariates for distance categories of 150 and 200 m but were nullified when adjusting for neighborhood SES. In analyses accounting for the number of service stations, the likelihood of PTB within 250 m was statistically significant in unadjusted models. Associations were, however, nullified in models accounting for maternal covariates or neighborhood SES. Our results suggest that there is no clear association between residential proximity to gasoline service stations in Montreal and PTB. Given the correlation between proximity of gasoline service stations and SES, it is difficult to delineate the role of these factors in PTB.

The aim of this study was to investigate electrochemical properties of brass in neutral and weakly alkaline solutions in the presence of cysteine as a nontoxic and ecological corrosion inhibitor. Potentiodynamic measurements, open circuit potential measurements, as well as chronoamperometric measurements were the methods used during investigation of the inhibitory effect of cysteine on the corrosion behaviour of brass. Potentiodynamic measurements showed that cysteine behaves as a mixed-type inhibitor in the investigated media. Based on polarization curves for brass in a weakly alkaline solution of sodium sulphate at varying cysteine concentrations, an interaction occurs between Cu⁺ions and the inhibitor, resulting in the formation of a protective complex on the electrode surface. The results of chronoamperometric measurements confirm the results obtained by potentiodynamic measurements. Optical microphotography of the brass surface also confirms the formation of a protective film in the presence of a 1 × 10⁻⁴ mol/dm³cysteine. Adsorption of cysteine on the brass surface proceeds according to the Langmuir adsorption isotherm.

Plant cell walls may play an important role in the uptake and accumulation of heavy metals. This study was undertaken to obtain a better understanding of the role of the root cell walls (RCW) and their subfractions on adsorption of cadmium (Cd) in a promising woody phytoremediation species, Salix jiangsuensis J172. In order to examine how Cd binding was affected by pectin and hemicellulose, RCW were isolated and sequentially fractioned by removing pectin (RCW1), partial removal of hemicellulose (RCW2), and complete removal of hemicellulose (RCW3). The RCW and fractions were characterized by Fourier transform infrared spectroscopy, which suggested decomposition of hemicellulose and a decline in nitrogen content following cell wall isolation and fractionation. The adsorption affinity of Cd increased gradually following the sequential extraction of root cells, suggesting that hemicellulose negatively impacted Cd adsorption, while pectin and cellulose enhanced Cd adsorption. Cd adsorption dynamics and isotherms could be best described by the pseudo-second-order (R > 0.99) and Freundlich (R > 0.97) models, respectively. Thermodynamic properties (∆G, ∆H, and ∆S), determined using the van’t Hoff equation, indicated that while Cd adsorption was endothermic, and spontaneous for RCW2 and RCW3, adsorption was not spontaneous for the root, RCW, and RCW1. The results provide evidence for the importance of the root cell walls in the adsorption of Cd by willow roots.

This work described a novel method for the synthesis of high-ferromagnetism nanoparticles (FeO/CNTs) to efficiently remove Cr(VI) from aqueous solution. The FeO/carbon nanotubes (CNTs) were prepared by in situ reduction with post-oxidation method by using cheap and environmentally friendly precursor under mild condition. Magnetic hysteresis loops revealed that FeO/CNTs had superior saturation magnetization (152 emu/g), enabling the highly efficient recovery of FeO/CNTs from aqueous solution by magnetic separation at low magnetic field gradients. FTIR, Raman, XPS, and TEM observations were employed to characterize the physical-chemical properties of FeO/CNTs, demonstrating that CNTs were successfully coated with iron oxide matrix. The adsorption equilibrium of Cr(VI) on FeO/CNTs was reached within 30 min. Langmuir, Freundlich, and Dubinin-Radushkevich isotherm were chosen to analyze the equilibrium data. The results indicated that Langmuir model can well describe the equilibrium data with the maximum adsorption capacity of 47.98 mg/g at room temperature and 83.54 mg/g at 353 K. The adsorption capacity of FeO/CNTs for Cr(VI) was greatly improved as compared to raw CNTs and other similar adsorbents reported. The pseudo-second-order kinetic model provided the best description of Cr(VI) adsorption on FeO/CNTs. Most importantly, possible synthesis mechanism and Cr(VI) removal mechanism were explored. The results suggest that large amounts of Cr(VI) were adsorbed on FeO/CNTs surface by substituting the surface position of -OH and then reducing it to Cr(OH) and CrO.

To develop an efficient bio-immobilization approach for the remediation of heavy metal pollution in soil, a mutant species of Bacillus subtilis (B38) was obtained by ultraviolet irradiation and selection under high concentration of cadmium (Cd) in a previous study. In the present study, to check the applicability of this mutated species to the sorption and immobilization of other metals, the sorption of four heavy metals, Cd, chromium (Cr), mercury (Hg), and lead (Pb), on living and nonliving B38 in single- and multiple-component systems under different conditions was investigated using batch experiments. Rapid metal binding occurred on both living and nonliving B38 during the beginning of the biosorption. The sorption kinetics followed the exponential equation for living biomass and the pseudo-first-order Lagergren model for nonliving biomass, with r (2) values in the range of 0.9004-0.9933. The maximum adsorptive quantity of the heavy metals on B38 changed with the solution pH, temperature, biomass dose, and ionic strength. The nonliving biomass generally showed greater or similar adsorptive capacities as compared with the living biomass and was not likely to be affected by the solution parameters. The bacterium had a stronger affinity to the cationic heavy metals than to the anionic one, and the equilibrium sorption amounts were 210.6, 332.3, and 420.9 mg/g for Cd(II), Hg(II), and Pb(II), respectively. The results of binary and ternary sorption experiments indicated that the metals with the higher sorption capacity in the single-component systems showed greater inhibitory effects on the biosorption of other metal ions in the multiple-component systems, but the sorption sites of Hg and Cd or Pb are likely to be different. The results of this study illustrated that the mutant species is a promising biosorbent for the remediation of multiple heavy metals.

The objectives of this study were to survey elementary school students regarding the environmental conditions of their elementary schools and to assess the relationship between air pollution and allergic disease using the International Study of Asthma and Allergies in Childhood (ISAAC) questionnaire. Therefore, this study was designed as a cross-sectional study. In this study, seven elementary schools were selected and they were classified into three categories. The selection included one school with no traffic-related or other pollutants, three with traffic-related pollutants, and three with traffic-related and other pollutants from industrial and filling station sources. The ISAAC questionnaire survey was given to all of the students except to those in the 1st grade who were presumed to be less likely to be exposed to the school environment than the remainder of the students attending those seven schools. The assessment of allergic disease was conducted on a total of 4,545 students. Three school zones with critical exposure were selected within each school and they were evaluated based on the levels of black carbon (BC), PM₁₀, SO₂, NO₂, and O₃. There was a significant increase in the risks based on the odds ratios of treatment experiences (within 1 year) for allergy-related diseases such as asthma and allergic rhinitis (a) in the school group with traffic-related pollutants and the school group with complex pollutants were 2.12 (1.41–3.19) and 1.59 (1.06–2.37), respectively, in comparison to the school groups with no exposure to pollutants. This was determined based on the odds ratio of symptoms and treatment experiences for allergy-related diseases by group based on the home town zone as a reference. Also, in the case of atopic dermatitis, the odds ratio of treatment experiences (within 1 year) was 1.42 (1.02–1.97), which indicated elevated risks compared to the students in the S1 school. A regression analysis was used to assess the relationship between the substances and the symptomatic experiences within the last year. There were significant increases in the odds ratio of the symptoms associated with allergic rhinitis and the BC and SO₂in the complex pollution areas. The results of the assessment of the relationship between atopic dermatitis-associated symptoms and O3 showed that the odds ratio increased with statistical significance.

The modification of MCM-41 was performed with 3-aminopropropyltrimethoxysilane. The structural order and textural properties of the synthesized materials were studied by X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetry/differential thermogravimetry, nitrogen adsorption, and desorption analysis. The adsorption capacity of NH₂-MCM-41 was studied with Remazol Red dye. The following parameters were studied in the adsorption process: pH, temperature, adsorbent dosage, and initial concentration. The desorption process was studied in different concentrations of NaOH solutions. The Freundlich isotherm model was found to be fit with the equilibrium isotherm data. Kinetics of adsorption follows the modified Avrami rate equation. The maximum adsorption capacity was estimated to be 45.9 mg g⁻¹, with removal of the dye of 99.1 %. The NH₂-MCM-41 material exhibited high desorption capacity with 98.1 %.