Numerous scientific publications have stirred a political debate about the impact of synthetic chemicals on the endocrine system of humans and animals. In an parliamentary inquiry, the Federal Government of Germany was requested to give its opinion on currently available information, to describe the measures taken so far and to outline the challenges for the future.The government’s reply — an abridged, translated version is published here — reviews crucial aspects of the present scientific debate. The main focus is on the critical examination of the request for immediate legal action (e.g. restricting the production or use of certain substances) to reduce exposure to endocrine disruptors. Furthermore, an overview is given on national and international measures taken so far to refine the assessment of the potential hazards emanating from these chemicals, to gain more insight into the underlying biological mechanisms and to improve the basis for targeted and adequate legal action.

Starting from an ecological perspective of urban-industrial areas, environmental accounting is used to analyse and to evaluate which environmental impacts are the result of communal activities (e.g. the results of different kinds of water supply systems). Therefore, the anthropogenic fluxes, the changing quality of areas as well as the processes between the environmental fields are taken into account. The approach is based on methodical elements of te Life Cycle Analysis and the Environmental Impact Assessment.Looking at the ‘urban systems’ within the communal activities, ‘ecological modelling’ gives us a new and fuller picture of the spatial and temporal character of urban metabolism. The approach supports the perception of cumulative effects and the postponement of environmental problems and opens new horizons for process-oriented environmental planning within the community. Greater efficiency and a decrease in costs can be arrived at by leaving ‘end of the pipe’ strategies; opportunities for a better planning process and measures for different individuals and organisations can be drawn up. A data base which acts as a ‘support system’ implements the computer-aided approach to environmental accounting.

The photo-induced degradation of naphthalene, 1,4-naphthoquinone, 1-naphthol and 1-NO₂ naphthalene, adsorbed on silica gel, and with the addition of nitrogenous air pollutants e.g. NO₂ (as KNO₂) was investigated. Results indicate that compounds adsorbed onto a solid carrier are degraded when irradiated with UV light (λ > 290 nm) in the presence of nitrites. The key species initiating the naphthalene degradation is the OH-radical which is generated through the photolysis of NO₂. Reaction products identified were 2-formyl-cinnamaldehyde, 1,4-naphthoquinone, nitronaphthol, o-phthaldialdehyde, phthalide and nitronaphthalene. A mass balance between 40–50% was achieved. Under the same irradiation conditions, 1-NO₂ naphthalene is mainly degraded by direct photolysis while degradation of 1-naphthol and 1,4-naphthoquinone proceeds via the reaction with OH-radicals. Identified products were hydroxy-nitro-nitroso- and quinones compounds.

This paper contains a literature review of the occupational injuries and ill-health in agriculture world-wide and a survey of the attempts that have been made to estimate the resulting economic and social costs.Agricultural workers suffer a wide variety of disorders as a result of their occupation. These range from minor (cuts, bruises) to more severe (deep wounds, fractures), permanent (amputation, spinal cord injury) and fatal injury. Ill-health as a result of contact with animals, micro-organisms, plant material dusts or chemicals are associated with certain types of agriculture. There is an underlying but unquantified incidence of pain, stress and injury as a result of ergonomic problems due to poor working procedures and conditions. Statistics from many countries or regions show that agriculture consistently has one of the highest accident and injury rates of the industrial sectors.There are many causes for the work related injury and ill-health in agricultural workers. In developed countries, tractors and other machinery cause a significant proportion of the accidents and are a major cause of occupational deaths. In less developed countries, accidents due to hand tools such as hoes, sickles and cutting instruments are most prevalent. Animals are a significant cause of injury and ill-health in many countries. Debilitating allergic reactions in the respiratory tract or the skin are caused by exposures to organic dusts, or by contact with allergenic plants in the field respectively. Where comparative data are available, occupational pesticide poisoning in agriculture is a small proportion (< 1–4%) of the total work related disorders.Because of the wide variety of occupational risks to agricultural workers, it is emphasised that if one type of agricultural practice is replaced by another then the risks from the alternative procedure need to be considered. If, for example, agrochemical pest control practices are replaced by methods involving the increased use of machinery, draught animals or manual operations, then an assessment of the resulting risks should be taken into account.Some of the economic costs of occupational injury and ill-health in agriculture can be quantified directly, such as medical costs, the cost of rehabilitation and loss of earnings. Other costs are more difficult to estimate such as loss of opportunity and income foregone for permanent and fatal injury and for the effect on a victim’s family. The estimation of the overall economic costs to farming communities and national agriculture requires further development. When one agricultural practice is replaced wholly or partly by another, for example agrochemical pest control by alternative control methods, then it is necessary to take into account the occupational health costs of the alternative procedure for realistic comparative assessment.There are a number of issues which require continued or increased attention by the relevant national and international authorities and by the agricultural industry. These include the improved collection and collation of occupational health statistics, a better understanding of the extent of ergonomic problems in agriculture, more realistic assessments of the cost of occupational injury and ill-health and the continued need to reduce occupational health disorders by appropriate training and education in agricultural practices and the use of agricultural equipment.

Microbial decontamination of hydrocarbon-polluted soil was paralleled with soil respiration measurements. About 1,500 tons of a loamy top soil were found to be contaminated with approximately 2000 mg/kg of aliphatic hydrocarbons, mainly oleic (C18:1) and linoleic acid (C18:2) found in the vicinity of a linoleum manufacturing and then a car dewaxing plant. The contaminated soil was analysed for dry matter, pH, dehydrogenase activity, electrical conductivity and nutrient content viz. nitrate, phosphorus and potassium, as well as a number of indigenous microbes. The soil was low in salt and nutrients. This paper describes the procedure and measures to decontaminate this bulk soil on site from approx. 2,000 to 500 mg of aliphatic hydrocarbons/kg dry matter by use of a nutrient emulsion, indigenous micro-organisms and aeration over 13 months. This 75% reduction in aliphatic hydrocarbons resulted in a concomitant carbon efflux, measured as soil respiration, and was used to calculate carbon fluxes.

Water extracts of soil samples of the former ammunition plant “Tanne” near Clausthal-Zellerfeld, Lower Saxony, Germany, were investigated for highly polar oxidized 2,4,6-trinitrotoluene (TNT) metabolites. 0.4 to 9.0 mg/kg dry soil 2,4,6-trinitrobenzoic acid (TNBA) and 5.8 to 544 mg/kg dry soil 2-amino-4,6-dinitrobenzoic acid (2-ADNBA) were found. In addition to the oxidized metabolites, TNT, 4- and 2-aminodinitrotoluene (4- and 2-ADNT), and 2,4-dinitrotoluene (2,4-DNT) were extractable with water. Most interestingly, in one sample, 2-ADNBA represented the main contaminant.The origin of the oxidized nitroaromatics is unknown at this time. They might be generated chemically or photochemically. Furthermore, a biological synthesis seems possible.

The interdependencies of parameters applied in the models of EUSES are visualised in a directed connectivity graph. The parameters (inputs, defaults, state variables, outputs) are represented by boxes (nodes) and their relations by lines (edges). The visualisation, on the one hand, clarifies the complexity of the models in EUSES and, on the other hand, creates an overview and transparency. The parameters’ relations to each other can be recognised faster, and the models can be better understood. The complexity was quantified by the number (variety), kind (substance parameter, physico-chemical parameter, concentration, other parameters), and depth (dimension) of the parameter and the number of relations (connectivity). The variety of EUSES (without the modelsSimple Treat andSimple Box whose interior structure is not documented and without the effect and risk characterisation) amounts to 466, the connectivity to 961, and the maximal dimension is 21.

"Soils and Groundwater Pollution and Remediation explores the toxic levels of metals radionuclides inorganics, and anthropogenic organic compounds found in the soils and groundwater of Asia, Africa, and Oceania. This 14-chapter book reviews the distribution, transformation and dynamics of the pollutants. The authors also reflect on the impact of acid rain."--Jacket.

Employing the data available to date, anthropogenic Pt fluxes are calculated for Germany with special emphasis on the Pt emitted by cars equipped with catalytic converters. Pt fluxes are quantified using five different methods (street deposition, automobile emission rate, sewage sludges, atmospheric load, industrial consumption). During the first and the second methods, approx. 100 kg of emitted Pt are seen to result for both for the mid 1990’s. Up to the year 2018, a total of 2100 kg of Pt will be emitted by cars equipped with catalytic converters. The diffuse atmospheric Pt deposition amounts to 0.73 – 4.4 μg/m²y or 260 kg Pt/year. Industrial sources emitting Pt into the atmosphere are likely but difficult to quantify. The enrichment of Pt in soils during agriculture fertilization with sewage sludges and during diffuse atmospheric deposition result in a level of 46 – 460 ng/kg up to the year 2018. Although this is slightly below the geogenic background, a comparison with the pollution history of Pb implies that forthcoming environmental Pt enrichment should not be neglected.

Absorption spectroscopy, which is widely used for concentration measurements of tropospheric and stratospheric compounds, requires precise values of the absorption cross-sections of the measured species. NO₂, O₂ and its collision-induced absorption spectrum, and H₂O absorption cross-sections have been measured at temperature and pressure conditions prevailing in the Earth’s atmosphere. Corrections to the generally accepted analysis procedures used to resolve the convolution problem are also proposed.