The Janghang smelter in Chungnam, South Korea started in 1936 was subsequently shutdown in 1989 due to heavy metal (loid) pollution concerns in the vicinity. Thus, there is a need for the soil in the area to be remediated to make it usable again especially for agricultural purposes. The present study was conducted to exploit the potential of arsenic (As)-tolerant bacteria thriving in the vicinity of the smelter-polluted soils to enhance phytoremediation of hazardous As. We studied the genetic and taxonomic diversity of 21 As-tolerant bacteria isolated from soils nearer to and away from the smelter. These isolates belonging to the genera Brevibacterium, Pseudomonas, Microbacterium, Rhodococcus, Rahnella, and Paenibacillus, could tolerate high concentrations of arsenite (As(III)) and arsenate (As(V)) with the minimum inhibitory concentration ranging from 3 to >20 mM for NaAsO₂and 140 to 310 mM NaH₂AsO₄ · 7H₂O, respectively. All isolates exhibited As(V) reduction except Pseudomonas koreensis JS123, which exhibited both oxidation and reduction of As. Moreover, all the 21 isolates produced indole acetic acid (IAA), 13 isolates exhibited 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase activity, 12 produced siderophore, 17 solubilized phosphate, and 13 were putative nitrogen fixers under in vitro conditions. Particularly, Rhodococcus aetherivorans JS2210, P. koreensis JS2214, and Pseudomonas sp. JS238 consistently increased root length of maize in the presence of 100 and 200 μM As(V). Possible utilization of these As-tolerant plant-growth-promoting bacteria can be a potential strategy in increasing the efficiency of phytoremediation in As-polluted soils.

The feasibility of an electro-Fenton process to treat tylosin (TYL), a non-biodegradable antibiotic, was examined in a discontinuous electrochemical cell with divided cathodic and anodic compartments. Only 15 min electrolysis was needed for total tylosin degradation using a carbon felt cathode and a platinum anode; while 6 h electrolysis was needed to achieve high oxidation and mineralization yields, 96 and 88 % respectively. Biodegradability improvement was shown since BOD₅/COD increased from 0 initially to 0.6 after 6 h electrolysis (for 100 mg L⁻¹initial TYL). With the aim of combining electro-Fenton with a biological treatment, an oxidation time in the range 2 to 4 h has been however considered. Results of AOS (average oxidation state) and COD/TOC suggested that the pretreatment could be stopped after 2 h rather than 4 h; while in the same time, the increase of biodegradability between 2 and 4 h suggested that this latter duration seemed more appropriate. In order to conclude, biological cultures have been therefore carried out for various electrolysis times. TYL solutions electrolyzed during 2 and 4 h were then treated with activated sludge during 25 days, showing 57 and 67 % total organic carbon (TOC) removal, respectively, namely 77 and 88 % overall TOC removal if both processes were considered. Activated sludge cultures appeared, therefore, in agreement with the assessment made from the analysis of physico-chemical parameters (AOS and COD/TOC), since the gain in terms of mineralization expected from increasing electrolysis duration appeared too low to balance the additional energy consumption.

European legislation has set a limit of 5 mg Hg per compact fluorescent lamp (CFL). Compliance with this regulation is tested with a method given in a European law from 2002 (“EU method”). According to the EU method, the arc tube has to be placed inside a fume cupboard and cut into segments. These pieces are collected and washed with HNO₃, which is finally analyzed for Hg. In this study, we investigated the losses of Hg via the gas phase, which are ignored by the EU method, using a semiquantitative radiochemical neutron activation analysis (RNAA) technique developed at the TRIGA Mark II reactor in Vienna (Austria). Depending on the product, the losses range as high as approximately 2 % at 20 °C. At higher ambient temperatures (hot summer days), the losses may increase by a factor of 4. Quality products generally suffer lower emission via the gas phase than cheap products, which is probably due to amalgam or other techniques that retain the Hg from broken CFLs. In any case, the EU method introduces a small but avoidable systematic error into the analysis and, in contrast to recommended practices, underestimates the Hg content of the CFL in question. Having technical alternatives at hand, we urge European lawmakers to adjust the law accordingly.

Walnut husk washing waters (WHWW), a by-product of walnut production, are indiscriminately used for irrigation without preliminary risk assessment. Basing on previous in vitro results on the toxicity of this by-product, we have followed the morphophysiological development of Zea mays, Lactuca sativa cv. Gentilina and L. sativa cv. Canasta under diluted and undiluted WHWW irrigation. Significant development alterations have been observed in root and shoot elongations for all crops as well as in total biomass and chlorophyll content. The genotoxic potential of WHWW has been concurrently verified; acridine orange/ethidium bromide staining evidenced chromatin modifications and DNA degradation and also was confirmed by DNA laddering. The DNA instability was also assessed through RAPD, thus suggesting the danger of the by-product of walnut processing and focusing the attention on the necessity of an efficient treatment of WHWWs. The findings obtained by PCA of agronomic and physiological traits suggested that establishing guidelines for the administration of WHWW for irrigation is of great importance, and it is necessary to supervise their use in agricultural soils.

Gene expression data may be very promising for the classification of toxicant types, but the development and application of transcriptomic-based gene classifiers for environmental toxicological applications are lacking compared to the biomedical sciences. Also, simultaneous classification across a set of toxicant types has not been investigated extensively. In the present study, we determined the transcriptomic response to three types of ubiquitous toxicants exposure in two types of human cell lines (HepG2 and HL-60), which are useful in vitro human model for evaluation of toxic substances that may affect human hepatotoxicity (e.g., polycyclic aromatic hydrocarbon [PAH] and persistent organic pollutant [POP]) and human leukemic myelopoietic proliferation (e.g., volatile organic compound [VOC]). The findings demonstrate characteristic molecular signatures that facilitated discrimination and prediction of the toxicant type. To evaluate changes in gene expression levels after exposure to environmental toxicants, we utilized 18 chemical substances; nine PAH toxicants, six VOC toxicants, and three POP toxicants. Unsupervised gene expression analysis resulted in a characteristic molecular signature for each toxicant group, and combination analysis of two separate multi-classifications indicated 265 genes as surrogate markers for predicting each group of toxicants with 100 % accuracy. Our results suggest that these expression signatures can be used as predictable and discernible surrogate markers for detection and prediction of environmental toxicant exposure. Furthermore, this approach could easily be extended to screening for other types of environmental toxicants.

Urban expansion is a major driving force changing regional hydrology and nonpoint source pollution. The Haihe River Basin, the political, economic, and cultural center of northeastern China, has undergone rapid urbanization in recent decades. To investigate the consequences of future urban sprawl on nonpoint source water pollutant emissions in the river basin, the urban sprawl in 2030 was estimated, and the annual runoff and nonpoint source pollution in the Haihe River basin were simulated. The Integrated Model of Non-Point Sources Pollution Processes (IMPULSE) was used to simulate the effects of urban sprawl on nonpoint source pollution emissions. The outcomes indicated that the urban expansion through 2030 increased the nonpoint source total nitrogen (TN), total phosphorous (TP), and chemical oxygen demand (COD) emissions by 8.08, 0.14, and 149.57 kg/km², respectively. Compared to 2008, the total nonpoint emissions rose by 15.33, 0.57, and 12.39 %, respectively. Twelve percent of the 25 cities in the basin would increase by more than 50 % in nonpoint source TN and COD emissions in 2030. In particular, the nonpoint source TN emissions in Xinxiang, Jiaozuo, and Puyang would rise by 73.31, 67.25, and 58.61 %, and the nonpoint source COD emissions in these cities would rise by 74.02, 51.99, and 53.27 %, respectively. The point source pollution emissions in 2008 and 2030 were also estimated to explore the effects of urban sprawl on total water pollution loads. Urban sprawl through 2030 would bring significant structural changes of total TN, TP, and COD emissions for each city in the area. The results of this study could provide insights into the effects of urbanization in the study area and the methods could help to recognize the role that future urban sprawl plays in the total water pollution loads in the water quality management process.

In the process of remediation of mine sites, the establishment of a vegetation cover is one of the most important tasks. This study tests two different approaches to manipulate soil properties in order to facilitate plant growth. Mine waste from Ingurtosu, Sardinia, Italy rich in silt, clay, and heavy metals like Cd, Cu, and Zn was used in a series of greenhouse experiments. Bacteria with putative beneficial properties for plant growth were isolated from this substrate, propagated and consortia of ten strains were used to inoculate the substrate. Alternatively, sand and volcanic clay were added. On these treated and untreated soils, seeds of Helianthus annuus, of the native Euphorbia pithyusa, and of the grasses Agrostis capillaris, Deschampsia flexuosa and Festuca rubra were germinated, and the growth of the seedlings was monitored. The added bacteria established well under all experimental conditions and reduced the extractability of most metals. In association with H. annuus, E. pithyusa and D. flexuosa bacteria improved microbial activity and functional diversity of the original soil. Their effect on plant growth, however, was ambiguous and usually negative. The addition of sand and volcanic clay, on the other hand, had a positive effect on all plant species except E. pithyusa. Especially the grasses experienced a significant benefit. The effects of a double treatment with both bacteria and sand and volcanic clay were rather negative. It is concluded that the addition of mechanical support has great potential to boost revegetation of mining sites though it is comparatively expensive. The possibilities offered by the inoculation of bacteria, on the other hand, appear rather limited.

This study was aimed to determine the presence of 69 organic contaminants in 77 representative bottled waters collected from 27 countries all over the world. All water samples were contained in polyethylene terephthalate bottles. Target compounds were (1) environmental contaminants (including 13 polycyclic aromatic hydrocarbons (PAHs), 31 pesticides including organochlorine (OCPs), organophosphorus, and pyrethroids; 7 polychlorinated biphenyls (PCBs); and 7 triazines) and (2) plasticizers (including 6 phthalates and 5 other compounds). Samples were analyzed by stir bar sorptive extraction followed by gas chromatography-tandem mass spectrometry. PAHs, OCPs, PCBs, and triazines, which are indicators of groundwater pollution, were not detected in most of the samples, except for naphthalene (0.005–0.202 μg/L, n = 16). On the other hand, plastic components were detected in 77 % of the samples. Most frequently detected compounds were dimethyl phthalate and benzophenone at concentrations of 0.005–0.125 (n = 41) and 0.014–0.921 (n = 32), respectively. Levels detected are discussed in terms of contamination origin and geographical distribution. Target compounds were detected at low concentrations. Results obtained showed the high quality of bottled water in the different countries around the world.

An approach to establish a soil environmental assessment model was proposed to evaluate the soil environmental quality level. The kriging technique and a self-organizing map (SOM) were integrated to investigate the soil environmental quality in a geographic information system (GIS). In this study, SOM was applied to categorize the data set of nine heavy metals in topsoil. A total of 261 topsoil samples were collected to determine the concentrations of Cu, Pb, Zn, Cd, Ni, Cr, Hg, As, and Mn. The samples were clustered into three classes by SOM and visualized by GIS. The results show that different environmental quality categories are significantly different and that the soil environmental quality assessment model is effective.