Release of heavy metals into waterways without treatment can cause a significant threat to the environment. In this paper, we present a method of improving the removal of heavy metals by using Eichhornia crassipes roots (ECR) supported on a polymethyl methacrylate (PMMA) thin film. The functional groups of the synthesized PMMA sample were identified by Fourier transform infrared spectroscopy. ECR roots dried fine powder has a small size and large surface area. They contain many polyfunctional metal-binding sites for both cationic and anionic metal complexes. The results show that using 0.1 g of ECR, about 70 % of Cd present in the water was removed in 4 h; while under the same conditions, about 55 % of Ni was removed. The concentrations of Ni and Cd were measured by laser-induced breakdown spectroscopy, a promising technique for the elemental analysis of heavy metals.

Organochlorine pesticides (OCPs), a potential threat to ecosystems and human health, are still widely residual in the environment. The residual levels of OCPs in the water and gas phase were monitored in Lake Chaohu, a large Chinese lake, from March 2010 to February 2011. Nineteen types of OCPs were detected in the water with a total concentration of 7.27 ± 3.32 ng/l. Aldrin, DDTs and HCHs were the major OCPs in the water, accounting for 38.3 %, 28.9 % and 23.6 % of the total, respectively. The highest mean concentration (12.32 ng/l) in the water was found in September, while the lowest (1.74 ng/l) was found in November. Twenty types of gaseous OCPs were detected in the atmosphere with a total concentration of 542.0 ± 636.5 pg/m³. Endosulfan, DDTs and chlordane were the major gaseous OCPs in the atmosphere, accounting for 48.9 %, 22.5 % and 14.4 % of the total, respectively. The mean concentration of gaseous OCPs was significantly higher in summer than in winter. o,p′-DDE was the main metabolite of DDT in both the water and gas phase. Of the HCHs, 52.3 % existed as β-HCH in the water, while α-HCH (37.9 %) and γ-HCH (30.9 %) were dominant isomers in the gas phase. The average fluxes were −21.11, −3.30, −152.41, −35.50 and −1314.15 ng/(m² day) for α-HCH, γ-HCH, HCB, DDT and DDE, respectively. The water–gas exchanges of the five types of OCPs indicate that water was the main potential source of gaseous OCPs in the atmosphere. A sensitivity analysis indicated that the water-gas flux of α-HCH, γ-HCH and DDT is more vulnerable than that of HCB and DDE to the variation of the parameters. The possible source of the HCHs in the water was from the historical usage of lindane; however, that in the air was mainly from the recent usage of lindane. The technical DDT and dicofol might be the source of DDTs in the water and air.

In this study, uranium(VI) was successfully removed from aqueous solutions using heat-treated carbon microspheres based on a batch adsorption technique. Influence of the parameters, such as solution pH, contact time, initial uranium(VI) concentration, and temperature on the removal efficiency have been investigated in detail. The results reveal that the maximum adsorption capacity of the heat-treated carbon microspheres toward uranium(VI) is 92.08 mg g(-1), displaying a high efficiency for the removal of uranium(VI) from aqueous solution. The experimental data are analyzed using sorption kinetic models. It is revealed that the process obey the pseudo-second-order kinetic model, the determining step might be chemical sorption. The thermodynamic parameters, such as ΔH°, ΔS°, and ΔG° show that the process is endothermic and spontaneous. This work provides an efficient, fast, and convenient approach for the removal of uranium(VI) from aqueous solutions.

The release of pharmaceuticals in the environment, as parent compounds, metabolites and transformation products, and the consequent risks posed to living organisms due to the unintended exposure of the latter to these chemicals are nowadays of increasing scientific concern. The development of advanced oxidation processes able to degrade these substances is in the core of the current research objectives, the main target being the removal of these compounds from wastewaters. Often the focus is on the removal of the parent compound only. However, these processes can form transformation products. Knowledge on the risk related to such transformation products is scarce. Among others, knowledge on their toxic effects and their biodegradability is of importance not only when they are present in the environment but also for the assessment of the advanced oxidation processes’ efficiency applied for their degradation. Photolytic (UV irradiation) and photocatalytic treatment (UV irradiation in the presence of TiO₂) of the fluoroquinolone ofloxacin were applied, and the biodegradability of the formed products was investigated using the Closed Bottle test (OECD 301 D). Various transformation products, formed both during the photo(cata)lytic treatment and the Closed Bottle test, were identified using chromatographic analysis with an ultra high-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) system. The transformation products formed during the phototreatments were found to be non-readily biodegradable as the biodegradation percentages were close to zero. The persistence of the various photo(cata)lytic transformation products during the Closed Bottle test may be attributed to the fluorine present in all the transformation products formed. The transformation products identified suggest that two transformation routes were present: decarboxylation and opening of the piperazinyl ring. Interestingly, it was observed that in the presence of a readily biodegradable carbon source (sodium acetate), the biodegradation percentage increased drastically for some of the photolytically treated samples. This was not the case for the photocatalytically treated samples, in which also mineralization of the parent compound was achieved faster. Further research is needed, however, in order to increase the understanding of the conditions that may lead to less potent and persistent substances during the application of such engineered or natural processes.

The improvement of knowledge about the toxicity and even processability, and stability of quantum dots (QD) requires the understanding of the relationship between the QD binding head group, surface structure, and interligand interaction. The scanned stripping chronopotentiometry and absence of gradients and Nernstian equilibrium stripping techniques were used to determine the concentration of Cd dissolved from a polyacrylate-stabilized CdTe/CdS QD. The effects of various concentrations of small organic ligands such as citric acid, glycine, and histidine and the roles of pH (4.5-8.5) and exposure time (0-48 h) were evaluated. The highest QD dissolution was obtained at the more acidic pH in absence of the ligands (52 %) a result of the CdS shell solubility. At pH 8.5 the largest PAA ability to complex the dissolved Cd leads to a further QD solubility until the equilibrium is reached (24 % of dissolved Cd vs. 4 % at pH 6.0). The citric acid presence resulted in greater QD dissolution, whereas glycine, an amino acid, acts against QD dissolution. Surprisingly, the presence of histidine, an amino acid with an imidazole functional group, leads to the formation of much strong Cd complexes over time, which may be non-labile, inducing variations in the local environment of the QD surface.

Wastewater treatment is an important source of nitrous oxide (N₂O), which is a strong greenhouse gas and dominate ozone-depleting substance. The purpose of this study was to evaluate the effect of carbon source on N₂O emission from anoxic/oxic biological nitrogen removal process. The mechanisms of N₂O emission were also studied. Long-term experiments were operated to evaluate the effect of three different carbon sources (i.e., glucose, sodium acetate, and soluble starch) on N₂O emission characteristics. And batch experiments, in the presence or absence of specific inhibitors, were carried out to identify the sources of N₂O emission. The ammonia-oxidizing bacteria (AOB) and denitrifiers community compositions under different circumstances were also analyzed based on which the underlying mechanisms of N₂O emission were elucidated. The conversion ratios of N₂O in reactors with glucose, sodium acetate, and soluble starch were 5.3 %, 8.8 %, and 2.8 %, respectively. The primary process responsible for N₂O emission was nitrifier denitrification by Nitrosomonas-like AOB, while denitrification by heterotrophic denitrifiers acted as the sink. Reactor with sodium acetate showed the highest N₂O emission, together with the highest nitrogen and phosphate removal ratios. Carbon source has a significant impact on N₂O emission quantity and relatively minor effect on its production mechanism.

Nutrient load into the ocean can be retained during the process of plant uptake and sedimentation in marshes along the bay zone. Seasonal variations of biomass and nutrient concentration in three dominated plant assemblages and associated sediments were monitored in this study area to determine effects of salt marsh on nutrient retention. Results showed that plant aboveground biomass displayed a unimodal curve with nutrient concentration generally decreased from spring to winter. Belowground biomass was relatively low during the rapid growth period with nutrient concentration tending to decrease and then increase during this period. Plant total nitrogen (TN) pools are higher than total phosphorus (TP) pools, and both pools showed significant seasonal variations. Water purification coefficients (WPC) of nutrients by plant assimilation were 34.4/17.3, 19.3/24.0, and 5.14/6.04 t/(m(2) year) (TN/TP) for Phragmites australis, Spartina alterniflora, and Scirpus mariqueter, respectively. Overall, these results suggest that higher annual plant biomass and nutrient assimilation contribute to greater nutrient retention capacity and accumulation in sediments, thereby enabling reduced eutrophication in transitional waters.

As part of a large study on assessing the impact of environmental contaminants in Indian avifauna, the presence of organochlorine pesticides (OCPs) in liver tissues of 16 species of birds collected from Ahmedabad, India during 2005–2007 was quantified. The higher concentrations of total organochlorine pesticides were detected in livers of shikra Accipiter badius (3.43 ± 0.99 μg/g wet wt) and the lower levels in white ibis Pseudibis papillosa (0.02 ± 0.01 μg/g wet wt). Marked differences in the concentrations of total OCPs occurred among species (p < 0.05). Concentrations of DDT and its metabolites, hexachlorocyclohexane (HCH) and isomers, dieldrin, and heptachlor epoxide were lower than the concentrations reported for various species of birds in India. Accumulation pattern of organochlorine pesticides in birds was, in general, in the order HCH > DDT > heptachlor epoxide > dieldrin. Among various pesticides analyzed, p,p′-DDE and β-HCH contributed maximum towards the total OCPs and study indicates the continuous use of lindane and DDT for agriculture and public health purpose, respectively. Although no serious threat is posed by any of the organochlorine pesticides detected in the present study species, continued monitoring is recommended.

Because of the continuous production of large amount of waste tires, the disposal of waste tires represents a major environmental issue throughout the world. This paper reports the utilization of waste tires (hard-to-dispose waste) as a precursor in the production of activated carbons (pollution-cleaning adsorbent). In the preparation of activated carbon (AC), waste rubber tire (WRT) was thermally treated and activated. The tire-derived activated carbon was characterized by means of scanning electron microscope, energy-dispersive X-ray spectroscopy, FTIR spectrophotometer, and X-ray diffraction. In the IR spectrum, a number of bands centred at about 3409, 2350, 1710, 1650, and 1300–1000 cm⁻¹ prove the present of hydroxyl and carboxyl groups on the surface of AC in addition to C═C double bonds. The developed AC was tested and evaluated as potential adsorbent removal of chromium (III). Experimental parameters, such as contact time, initial concentration, adsorbent dosage and pH were optimized. A rapid uptake of chromium ions was observed and the equilibrium is achieved in 1 h. It was also found that the adsorption process is pH dependent. This work adds to the global discussion of the cost-effective utilization of waste rubber tires for waste water treatment.

Complexing agents are extensively applied in many fields of industry. They are used to provide effective controlling trace metal ions in cleaning industries, textile, pulp and paper production, water treatment, agriculture, food industries, etc. Recently, the low biodegradability of these ligands and their accumulation in the environment has become a cause for concern. Therefore, replacement of ethylenediaminetetraacetic acid and diethylenetriaminepentaacetic acid by more environmentally friendly chelating agents is highly desirable. So far, these acids and their salts have been applied as components of household chemistry, cosmetics, modern microelement fertilizers and agrochemicals. This paper reviews the sorption of heavy metal ions such as Cu(II), Zn(II), Cd(II) and Pb(II) in the presence of the above-mentioned complexing agents on commercially available anion exchangers of different matrix. The obtained sorption results were fitted using the Langmuir and Freundlich sorption isotherm models. The kinetic data were also analysed using the Lagergren, Ho and McKay sorption kinetic equations. The studies were carried out considering the effects of such important parameters as phase contact time, initial concentration, pH and temperature.