Nutrient loading from sewage wastewater discharge contributes to the eutrophication of coastal waters. Wastewater from the Gold Coast, Australia is discharged into the Gold Coast Seaway (GCS) for 13.5 h d⁻¹ primarily on the ebbing tide to disperse wastewater seawards. Nitrogen stable isotopes were used to assess how effectively the tidally staged release system dispersed wastewater out of the GCS and identified pathways by which sewage-N was incorporated into food webs. Turf algae, limpets and barnacles were sampled at the GCS, at two coastal sites and at the mouth of a control estuary that lacked point-source discharge. In the GCS δ¹⁵N values of algae and limpets returned to coastal baseline levels within 250 m of the diffusers. In contrast, δ¹⁵N of filter-feeding barnacles did not significantly vary indicating wastewater-N does not dominate the pelagic food web. Nitrogen stable isotopes clearly demonstrated that the tidally-staged wastewater release system effectively disperses wastewater offshore.

Blooms of the moon jellyfish Aurelia coerulea frequently occur in coastal waters. The increased availability of substrates for the settlement and proliferation of polyps due to the expansion of artificial structures in coastal areas has been proposed as a possible contributing factor in jellyfish blooms. This paper investigates whether a marine artificial lake (Fenghuang Lake) provides additional substrates for A. coerulea polyps and contributes to jellyfish blooms. High densities of A. coerulea ephyrae were discovered in this lake, with a mean density of 41 individuals/m3 and a maximum measured density of 128 individuals/m3. Meanwhile, A. coerulea ephyrae were also found in the two emptying channels outside the lake, with a mean density of 13 individuals/m3. Underwater surveys revealed that dense colonies of A. coerulea polyps occurred mainly on biogenic reefs formed by a polychaete, which was identified as an invasive serpulid species Hydroides dianthus, based on the phylogenetic analysis of mitochondrial COI gene sequences. Our study highlights the potential modification of habitats by the alien polychaete H. dianthus, which might provide complex benthic habits suitable for the settlement and proliferation of A. coerulea polyps and may contribute to jellyfish blooms in the marine artificial lake and nearby coastal waters.

Poor microbial water quality jeopardizes the health and safety of food produced by aquaculture farms. Three fish farms and transect sites in Singapore were assessed for microbial water quality and antimicrobial resistance determinants. Of the 33 multidrug resistant E. coli isolated from surface waters of the Johor Straits, 81.8% were ESBL producers. The relative abundance of sul1, qnrA and intI1 genes were higher in sediments than surface waters. Among the surface water samples, higher concentrations (10−1−101) of beta-lactamases (blaSHV, blaOXA, blaCTX-M) were detected in the transect sites. This study highlights a potential antimicrobial resistance transmission chain from environmental waters, to animal carriers and humans.

Proteome response of plants is an important process that enables them to cope with environmental stress including metal stress. In this study, the proteome of Gracilaria lemaneiformis exposed to lead was investigated. Two-dimensional gel electrophoresis analysis revealed 123 protein spots, among which 14 proteins were significantly differentially expressed and identified using MALDI-TOF MS. Two of the up-regulated proteins were identified and predicted to be involved in photosynthesis and signal transduction, while eleven down-regulated proteins were functionally grouped into five classes including photosynthesis, energy metabolism, protein metabolism, carbohydrate transport and metabolism, and antioxidation proteins. There was also an up-regulation in superoxide dismutase, peroxidase, glutathione s-transferase, and heat-shock protein 70 upon Pb exposure. Proteomic studies provide a better picture of protein networks and metabolic pathways primarily involved in intracellular detoxification and defense mechanisms.

It has been shown that the current approach to the assessment of contamination in the sediments obtained during the dredging works in the Baltic countries indicates the presence of "non-contaminated" dredged material. The concentration limits of heavy metals, Polycyclic Aromatic Hydrocarbons (PAHs), Polychlorinated Biphenyls (PCBs) have been exceeded only in 1% of the samples obtained during the dredging works (2005–2015) within the Polish coastal zone. After 2008, no contaminated sediments have been found. Also, in the remaining Baltic countries, sediments are very rarely contaminated. As a result of this assessment, the sediments can be stored in the sea or have a practical application. However, it has been questioned whether the large cost of determining the numerous chemical parameters is justified. It has been proposed to carry out simple screening tests. Following the preliminary screening, the decision on more detailed (and expensive) chemical tests of individual pollutants would be made.

Sesuvium portulacastrum was treated with mixture of copper, zinc, and cadmium for 60 days, with the concentration of each metal ranging from 0 to 20 mg/L. The tolerance of plants and bioaccumulation of heavy metals were then investigated. The height of S. portulacastrum decreased significantly with increasing heavy metal concentrations from 1 to 20 mg/L. The biomass was adversely impacted when the concentration exceeded 5 mg/L. There were no significant differences in malondialdehyde (MDA) concentration among different treatment groups, while the soluble protein content and superoxide dismutase (SOD) activity decreased with increasing heavy metal concentration. However, the BCF values of the three metals were all higher than 10 and the tolerance in root was up to 1000 mg/kg without causing significant growth inhibition, suggesting that S. portulacastrum should be a potential candidate for phytostabilization for the phytoremediation of polymetallic contaminations in coastal environments.

The main objective with this study has been to study injection techniques for subsea dispersant injection (SSDI) to recommend techniques relevant for both laboratory studies and operational response equipment.The most significant factor was the injection point of the dispersant in relation to the release of the oil. The dispersant should be injected immediately before or after the oil is released. Then the dispersant will mix into the oil and reduce IFT before the oil enters the turbulent zone where initial droplet formation occurs.All injection techniques tested gave significant reductions in oil droplet sizes. However, due to the rapid oil droplet formation in turbulent jets and possible formation of surfactant aggregates in the oil, premixing of dispersants should not be used for experimental studies of subsea dispersant injection. This could underestimate dispersant effectiveness and produce results that might not be representative for up-scaled field conditions.

Litter is present in all marine waters around the globe. It consists of several compound classes of which plastic is of special interest because of its high abundance and possible threat to marine organisms. The regional distribution, composition and abundance of large litter items (LI) at the sea floor of the North Sea and the Baltic Sea were investigated based on 175 bottom trawls between 2013 and 2015. Different types of marine litter >2.5cm were classified according to the protocol of the ICES International Bottom Trawl Survey. The results showed considerable geographical variation: In the North Sea, a mean litter abundance of 16.8LI/km² was found, whereas the litter abundance in the Baltic Sea was significantly lower (5.07LI/km²). In general, plastic represented 80% of the litter items. During the study, some methodical aspects with possible impact on the results were identified that need to be addressed in future sampling campaigns.

Macro- and microplastics abundances were determined in the Adriatic Sea following the MSFD TG10 protocol. The studied areas included populated gulfs, river outlets and offshore waters in five Adriatic countries. The use of small ships enabled us to detect small sized plastics (2.5–5 cm) and record average macroplastics densities of 251 ± 601 items km−2, one order of magnitude higher than previously considered. Results from manta net tows for microplastics revealed an average abundance of 315,009 ± 568,578 items km−2 (217 ± 575 g km−2). We found significantly higher microplastics abundances in nearshore (≤4 km) than in offshore waters (>4 km) and this trend seems to affect also the small sized macro plastic fragments (2.5–5 cm). The dominant polymers were polyethylene and polypropylene while the presence of some rare polymers and waxes used in food and dentistry indicated waste water treatment plants as potential sources of microplastics.

Results of this research focuses on microplastic contents (levels, type, size, colour) in maricultured and natural mussels (Mytilus galloprovincialis) from different Italian stocks. No significant differences were found among maricultured and natural stocks. All recovered MPs are filaments ranging within 750–6000 μm of maximum length (average values 1150–2290 μm). Feeding raw mussel could produce median MP intakes of 6.2–7.2 items/g w.w. Concerning human exposure by diet, both raw and cooked values are important. Some preliminary tests performed in this study evidenced that the cooking process determined lower MPs levels (−14%) in cooked tissues compared to raw ones, MPs were recorded in cooking water and were characterized by a lower size than in raw mussels. Results obtained by this study represent an important baseline on MPs level to evaluate environmental and human exposure risks by diet.