In this paper, three types of black carbons (BCs) named R-BC, W-BC, and C-BC were derived from rice straw ashes, wheat straw ashes, and corn straw ashes, respectively. Under room temperature and in an anaerobic aqueous solution, these three types of BCs could catalyze the reduction of nitrobenzene (NB) by sulfides rather than only act as the superabsorbent. The catalytic activities of BCs derived from different crop-residue ashes were very different and in the order of R-BC > W-BC > C-BC, since the reaction rate constants (k ₒbₛ) of NB with the BCs in the presence of 3 mM sulfides were 0.0186, 0.0063, and 0.0051 h⁻¹, respectively. The key catalytic active sites for NB reduction were evaluated, with four types of modified BCs and two types of tailored graphite as the model catalysts. The results indicated that BCs probably had two types of active sites for NB reduction, the microscopic graphene moieties and the surface oxygen functional groups. Since the sulfides and BCs often coexist in the environment, this BC-catalyzed reduction technology of NACs may be applied as an in situ remediation technique without the need for reagent addition.

The growth and intellectual development of children less than 6 years old may be affected by exposure to low levels of lead. To further reduce environmental lead exposure, this study examined possible household-related factors that affect the blood lead levels of Taiwanese children. In total, based on a stratified random sampling strategy, 934 kindergarten students were recruited throughout Taiwan from April to October 2011 after their parents signed a statement of consent. A venous blood sample was drawn from each participant and analyzed for lead content using inductively coupled plasma mass spectrometry. Information on the demographics and household environment of the study subjects was collected by administering a questionnaire (Table 1). The geometric mean lead level in the blood samples of the study subjects was 1.84 μg/dL with a geometric standard deviation of 1.55. The blood lead level was negatively correlated with household income and parental educational levels (p < 0.0001). Study subjects with more siblings also tended to have higher blood lead levels (p < 0.0001). Incense burning in the home, an ethnic tradition, was also identified as a significant factor for increased blood lead levels (p < 0.0003) and demonstrated a dose-dependent relationship with frequency of incense burning at home (p = 0.0022). Because the health effects of low levels of lead exposure have been reported in recent years and because no consensus has been reached regarding a safety threshold for blood lead level in children, any trivial factor is worth investigating to further prevent lead exposure in children. Incense burning at home is a common traditional religious activity in Taiwan; therefore, more study is warranted to further eliminate the lead content in incense and reduce lead exposure for the families who practice this activity.

Compared to traditional chemical or physical treatments, phytoremediation has proved to be a cost-effective and environmentally sound alternative for remediation of contaminated dredged sediment. A field study was conducted in a sediment disposal site predominantly colonized by Typha angustifolia under different sediment moisture conditions to estimate the phytoremediation effects of dredged sediment. The moisture content was 37.30 % and 48.27 % in aerated and waterlogged sediment, respectively. Total nitrogen (TN) content was higher in the waterlogged sediment than in the aerated sediment. The total Cd contents were lower in aerated sediment, which was mainly resulted from the lower exchangeable fraction of Cd. The bioaccumulation of P, Cu and Pb in T. angustifolia was promoted by waterlogging, and the belowground tissue concentrations and accumulation factors (AFs) of Cu were higher than that of other metals, which can be explained by that Cu is an essential micronutrient for plants. Consistent with many previous studies, T. angustifolia showed higher metal levels in roots than in above-ground tissues at both the sediment conditions. Due to the improved biomass produced in the aerated sediment, the removals of nutrients and the metals by plant harvest were higher from aerated sediment than from waterlogged sediment. It was indicated that maintaining the dredged sediment aerated can avoid release risk and plant uptake of metals, while the opposite management option can promote phytoextraction of these contaminants.

The sensitivity to ozone of ten Bangladeshi wheat cultivars was tested by exposing plants to eight ozone exposure regimes (50, 60, 80, 100, 120, 135, 150, and 200 ppb for 14, 11, 8, 6, 5, 4, 3, and 1 days, respectively, for 8 h/day) in controlled environment chambers. Visible leaf injury, dry weight, chlorophyll, carotenoid content, leaf greenness (SPAD value), quantum yield of photosynthesis, and stomatal resistance were measured to evaluate response. Shoot biomass, total chlorophyll, leaf greenness, and carotenoid content were reduced in ozone-exposed plants. Based on the results of principal component analysis (PCA)-biplot analysis, the order of sensitivity to ozone was: Akbar >> Sufi ≥ Bijoy ≥ Shatabdi > Bari-26 ≥ Gourab > Bari-25 ≥ Prodip ≥ Sourav >> Kanchan. The most important parameters to discriminate cultivars with respect to ozone sensitivity were visible injury and chlorophyll b/a ratio, whereas quantum yield of photosynthesis was less important. Differences in stomatal resistance were not a significant factor in ozone response. Regression of cultivars’ PCA scores against year of release revealed no trend, suggesting that ozone tolerance was not incorporated during cultivar breeding.

The functional parameters, i.e., the estimated equilibrium species number (S ₑq ), the colonization rate constant, and the time taken to reach 90 % of S ₑq (T ₉₀ ), of microperiphyton fauna have been widely used to determine the water quality status in aquatic ecosystems. The objective of this investigation was to develop a protocol for determining functional parameters of microperiphyton fauna in colonization surveys for marine bioassessment based on rarefaction and regression analyses. The temporal dynamics in species richness of microperiphyton fauna during the colonization period was analyzed based on a dataset of periphytic ciliates in Chinese coastal waters of the Yellow Sea. The results showed that (1) based on observed species richness and estimated maximum species numbers, a total of 16 glass slides were required in order to achieve coefficients of variation of <5 % in the functional parameters; (2) the rarefied average species richness and functional parameters showed weak sensitivity to sampling effort; (3) the temporal variations in average species richness were well-fitted to the MacArthur-Wilson model; and (4) the sampling effort of ~8 glass slides was sufficient to achieve coefficients of variation of <5 % in equilibrium average species number (AvS ₑq ), colonization rate (AvG), and the time to reach 90 % of AvS ₑq (AvT ₉₀ ) based on the average species richness. The findings suggest that the AvS ₑq , AvG, and AvT ₉₀ values based on rarefied average species richness of microperiphyton might be used as reliable ecological indicators for the bioassessment of marine water quality in coastal habitats.

Nutrient enrichment from nonpoint source pollution is one of the main causes of poor water quality and biotic impairment in many streams and rivers worldwide. The establishment of reference nutrient conditions in a river system is an essential but difficult task for water quality control. In the present study, the reference concentrations of total nitrogen (TN) and total phosphorus (TP) were estimated in an intensive agricultural watershed, the Cao-E River system of Eastern China. Based on a 3-year water quality monitoring data in the river system, three approaches were adopted to establish the reference concentrations of TN and TP, those are the 75th percentile of frequency distribution of nutrient concentrations in reference streams, the 25th percentile of frequency distribution of nutrient concentration in general streams (including reference and non-reference streams) and regression modeling. Results showed that the nutrient reference concentrations were slightly different from different approaches. By the three approaches, the average reference concentrations for TN and TP in the study system were 1.73 ± 0.13 mg l⁻¹and 55.23 ± 4.77 μg l⁻¹with CV of 7.39 % and 8.63 %, respectively. Accordingly, the reference concentrations for TN and TP were recommended to be 1.70 mg l⁻¹and 55 μg l⁻¹, respectively. In the mountainous and intensive agricultural watershed, the major anthropogenic impacts to river water quality were the urban area percentage cover, cropland area with slopes 0–8°, and livestock and poultry waste loads density. These variables could account for 89.7 % and 80.3 % of the total variations for TN and TP concentration, respectively.

Click chemistry approaches are tailored to generate molecular building blocks quickly and reliably by joining small units together selectively and covalently, stably and irreversibly. The vegetable tannins such as hydrolyzable and condensed tannins are capable to produce rather stable radicals or inhibit the progress of radicals and are prone to oxidations such as photo and auto-oxidation, and their anti-oxidant nature is well known. A lot remains to be done to understand the extent of the variation of leather stability, color variation (lightening and darkening reaction of leather), and poor resistance to water uptake for prolonged periods. In the present study, we have reported click chemistry approaches to accelerated vegetable tanning processes based on periodates catalyzed formation of oxidized hydrolysable and condensed tannins for high exhaustion with improved properties. The distribution of oxidized vegetable tannin, the thermal stability such as shrinkage temperature (T ₛ) and denaturation temperature (T d), resistance to collagenolytic activities, and organoleptic properties of tanned leather as well as the evaluations of eco-friendly characteristics were investigated. Scanning electron microscopic analysis indicates the cross section of tightness of the leather. Differential scanning calorimetric analysis shows that the T d of leather is more than that of vegetable tanned or equal to aldehyde tanned one. The leathers exhibited fullness, softness, good color, and general appearance when compared to non-oxidized vegetable tannin. The developed process benefits from significant reduction in total solids and better biodegradability in the effluent, compared to non-oxidized vegetable tannins.

Identification and classification of metal-accumulating plant species is essential for phytoextraction. Cluster analysis is used for classifying individuals based on measured characteristics. In this study, classification of plant species for metal accumulation was conducted using cluster analysis based on a practical survey. Forty plant samples belonging to 21 species were collected from an ancient silver-mining site. Five groups such as hyperaccumulator, potential hyperaccumulator, accumulator, potential accumulator, and normal accumulating plant were graded. For Cd accumulation, the ancient silver-mining ecotype of Sedum alfredii was treated as a Cd hyperaccumulator, and the others were normal Cd-accumulating plants. For Zn accumulation, S. alfredii was considered as a potential Zn hyperaccumulator, Conyza canadensis and Artemisia lavandulaefolia were Zn accumulators, and the others were normal Zn-accumulating plants. For Pb accumulation, S. alfredii and Elatostema lineolatum were potential Pb hyperaccumulators, Rubus hunanensis, Ajuga decumbens, and Erigeron annuus were Pb accumulators, C. canadensis and A. lavandulaefolia were potential Pb accumulators, and the others were normal Pb-accumulating plants. Plant species with the potential for phytoextraction were identified such as S. alfredii for Cd and Zn, C. canadensis and A. lavandulaefolia for Zn and Pb, and E. lineolatum, R. hunanensis, A. decumbens, and E. annuus for Pb. Cluster analysis is effective in the classification of plant species for metal accumulation and identification of potential species for phytoextraction.

The UN estimated about five million deaths every year due to water-borne diseases, accounting from four billion patients. Keeping in view, the ever increasing health issues and to undermine this statistics, a reliable and sustainable water-treatment method has been developed using visible light for water treatment. titania nanoparticles (NPs) have been synthesized successfully by a more applicable method Viz: liquid impregnation (LI) method. The bacterial death rate by photocatalysis under visible light was studied by employing a typical fluorescent source and was found to follow pseudo first-order reaction kinetics. The nanoparticles were characterized using X-ray diffraction (XRD), scanning electron microscopy, and energy-dispersive X-ray spectroscopy to deduce their size range, surface morphology, and elemental compositions, respectively. Among all the prepared grades, 1 % Ag–TiO₂was found to be a very effective photocatalytic agent against Escherichia coli. The resulted photoinactivated data were also evaluated by different empirical kinetic models for bacterial inactivation. Hom, Hom-power, Rational, and Selleck models were not able to explain the disinfection kinetics but modified-Hom model fitted best with the experimentally obtained data by producing a shoulder, log-linear, and a tail region.

Pollution resulting from hazardous glass (HG) is widespread across the globe, both in terms of quantity and associated health risks. In waste cathode ray tube (CRT) and fluorescent lamp glass, mercury and lead are present as the major pollutants. The current review discusses the issues related to quantity and associated risk from the pollutant present in HG and proposes the chemical, biological, thermal, hybrid, and nanotechniques for its management. The hybrid is one of the upcoming research models involving the compatible combination of two or more techniques for better and efficient remediation. Thermal mercury desorption starts at 100 °C but for efficient removal, the temperature should be >460 °C. Involvement of solar energy for this purpose makes the research more viable and ecofriendly. Nanoparticles such as Fe, Se, Cu, Ni, Zn, Ag, and WS₂alone or with its formulation can immobilize heavy metals present in HG by involving a redox mechanism. Straight-line equation from year-wise sale can provide future sale data in comparison with lifespan which gives future pollutant approximation. Waste compact fluorescent lamps units projected for the year 2015 is 9,300,000,000 units and can emit nearly 9,300 kg of mercury. On the other hand, CRT monitors have been continuously replaced by more improved versions like liquid crystal display and plasma display panel resulting in the production of more waste. Worldwide CRT production was 83,300,000 units in 2002 and can approximately release 83,000 metric tons of lead.