Human serum samples (n = 113) from Bizerte, northern Tunisia, collected between 2011 and 2012 were analyzed for 8 organochlorine pesticides (OCPs) including p,p′-dichlorodiphenyltrichloroethane (DDT) and its metabolites, hexachlorobenzene (HCB), hexachlorocyclohexane isomers, dieldrin, and heptachlor and 12 polychlorinated biphenyls (PCBs) congeners. Concentrations of these residues in serum were determined by gas chromatography with electron capture detector and total cholesterol (CHOL) and triglycerides (TG) levels were evaluated by enzymatic colorimetric method. HCB, p,p′-DDE, PCB-138, PCB-153, and PCB-180, were the most abundant organochlorine compounds (OCs) detected in >95 % of the study subjects. The mean levels of p,p′-DDE and HCB in serum were 168.8 and 49.1 ng g⁻¹lipid, respectively. The sum PCBs concentrations ranged from 37.5 to 284.6 ng g⁻¹lipid in the samples, with mean and median value of 136.1 and 123.2 ng g⁻¹lipid, respectively. The PCB profile consisted of persistent congeners, such as PCB-138, PCB-153, and PCB-180 which contributed for approximately 82.7 % to the ∑PCBs. Statistical analysis showed that most OCs correlated significantly with age, considering all samples together or with gender differentiation. The present study shows that the levels of p,p′-DDE and ∑DDTs were significantly higher in females than in males (p < 0.05), while PCBs levels were significantly higher in male (p < 0.05) than in females. No statistically significant association was found between body mass index and concentration of any organochlorine pesticide or PCB congeners 153, 138, 180, or ∑PCBs.

Compost leachates were collected to investigate the influence of the composition and removal of volatile fatty acids (VFAs), humic-like substances (HSs), and dissolved organic nitrogen (DON) on heavy metal distribution during the leachate treatment process. The results showed that acetic and propionic acids accounted for 81.3 to 93.84 % of VFAs, and that these acids were removed by the anaerobic-aerobic process. Humic- and fulvic-like substances were detected by excitation–emission matrix spectroscopy coupled with parallel factor analysis, and their content significantly decreased after the anaerobic and membrane treatments. DON in compost leachates ranged from 26.53 mg L⁻¹to 919.46 mg L⁻¹, comprised of dissolved free amino acids and the protein-like matter bound to humic- and fulvic-like substances, and was removed by the aerobic process. Correlation analysis showed that Mn, Ni, and Pb were bound to VFAs and protein-, fulvic-, and humic-like substances in the leachates. Co was primarily bound to fulvic- and humic-like matter and inorganic sulfurs, whereas Cu, Zn, and Cd interacted with inorganic sulfur.

This study presents the distribution of 15 major and trace elements in sediments and fish and their pericardial parasites from Lake Naivasha, Kenya. The lake is one of the few freshwater lakes in the Great Rift Valley and is under strong anthropogenic pressure mainly due to agricultural activities. Its fish provide a valuable protein source for approximately 100,000 people in the area. Fish and their parasites have been acknowledged as indicators of environmental quality due to their accumulation potential for both essential and nonessential trace elements. A total of 34 specimens of the blue spotted tilapia Oreochromis leucostictus and pooled samples of their pericardial parasite, the anisakid nematode Contracaecum multipapillatum (larvae 3), were examined. Element concentrations were determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and graphite furnace atomic absorption spectrometry (GF-AAS). The concentrations of elements in the sediments reflected the geology of the area and did not point to pollution: none of the investigated trace elements, including Pb, Cd, Cu, and Zn, showed elevated values. In contrast, concentrations in the fish muscle were elevated for Li, Sr, Cd, and Zn, with high target hazard quotients (THQ > 0.1) indicating a potential health risk to the consumers of this fish. Fish liver showed significantly higher concentrations of the trace elements Fe, Mn, Cd, and Cu compared to the muscle and C. multipapillatum. In the parasite, Zn had the highest concentration, but the worms only minimally accumulated trace elements in relation to their fish host.

XAD-2 resin-based passive samplers (PAS) with dimensions adapted to 100 mL accelerated solvent extraction cells were used to study the temporal and spatial variations of 17 PAHs on five sites in the atmosphere of southern Luxembourg. This new design allowed extracting the PAS without emptying the resin from the shelter. PAH analyses were done with gas chromatography–tandem mass spectrometry. PAS were deployed for 1 year with varying sampling periodicities, and 16 PAHs were detected with concentrations ranging from 1 ng/PAS for chrysene to 9,727 ng/PAS for naphthalene. The PAS were found adapted to the monitoring of temporal and spatial variations for lightweight PAHs (up to four aromatic rings) though not for heavy PAHs with five aromatic rings or more, as these compounds are preferably in the particle phase of the atmosphere and the amount of these PAHs trapped on the PAS will be too low.

The behavior of particulate matter (PM) during high-concentration episodes was investigated using monitoring data from Guui station, a comprehensive air monitoring station in Seoul, Korea, from January 2008 to March 2010. Five non-Asian dust (ND) episodes and two Asian dust (AD) episodes of high PM concentrations were selected for the study. During the ND episode, primary air pollutants accumulated due to low wind speeds, and PM₂.₅ increased along with most other air pollutants. Particles larger than PM₂.₅ were also high since these particles were generated by vehicular traffic rather than wind erosion. During strong AD episodes, PM₁₀–₂.₅ primarily increased and gaseous primary air pollutants decreased under high wind speeds. However, even during the AD episode, PM₂.₅ and gaseous primary air pollutants increased when the effects of AD were weak and wind speeds were low. This study corroborates that accumulation of air pollutants due to a drop in surface wind speed plays an important role in short-term high-concentration occurrences. However, low wind speeds could not be directly linked to local emissions because a significant portion of accumulated air pollutants resulted from long-range transport.

Molecularly imprinted polymer adsorbent has been prepared to remove a group of recalcitrant and acutely hazardous (p-type) chemicals from water and wastewaters. The polymer adsorbent exhibited twofold higher adsorption capacity than the commercially used polystyrene divinylbenzene resin (XAD) and powdered activated carbon adsorbents. Higher adsorption capacity of the polymer adsorbent was explained on the basis of high specific surface area formed during molecular imprinting process. Freundlich isotherms drawn showed that the adsorption of p-type chemicals onto polymer adsorbent was kinetically faster than the other reference adsorbents. Matrix effect on adsorption of p-type chemicals was minimal, and also polymer adsorbent was amenable to regeneration by washing with water/methanol (3:1, v/v) solution. The polymer adsorbent was unaltered in its adsorption capacity up to 10 cycles of adsorption and desorption, which will be more desirable in cost reduction of treatment compared with single-time-use activated carbon.

To explain the detailed process involved in phosphorus removal by periphyton, the periphyton dominated by photoautotrophic microorganisms was employed in this study to remove inorganic phosphorus (P ᵢ ) from wastewater, and the removal kinetics and isotherms were then evaluated for the P ᵢ removal process. Results showed that the periphyton was capable of effectively removing P ᵢ that could completely remove the P ᵢ in 24 h at an initial P ᵢ concentration of 13 mg P L⁻¹. Furthermore, the P ᵢ removal process by the periphyton was dominated by adsorption at initial stage (~24 h), which involved physical mechanistic process. However, this P ᵢ adsorption process was significantly influenced by environmental conditions. This work provides an insight into the understanding of phosphorus adsorption by periphyton or similar microbial aggregates.

Sorption and biodegradation are the main mechanisms for the removal of endocrine disruptor compounds (EDs) from both solid and liquid matrices. There are recent evidences about the capacity of white-rot fungi to decontaminate water systems from phenolic EDs by means of their ligninolytic enzymes. Most of the available studies report the removal of EDs by biodegradation or adsorption separately. This study assessed the simultaneous removal of five EDs—the xenoestrogens bisphenol A (BPA), ethynilestradiol (EE2), and 4-n-nonylphenol (NP), and the herbicide linuron and the insecticide dimethoate—from a municipal landfill leachate (MLL) using a combined sorption/bioremoval approach. The adsorption matrices used were potato dextrose agar alone or added with each of the following adsorbent materials: ground almond shells, a coffee compost, a coconut fiber, and a river sediment. These matrices were either not inoculated or inoculated with the fungus Pleurotus ostreatus and superimposed on the MLL. The residual amount of each ED in the MLL was quantified after 4, 7, 12, and 20 days by HPLC analysis and UV detection. Preliminary experiments showed that (1) all EDs did not degrade significantly in the untreated MLL for at least 28 days, (2) the mycelial growth of P. ostreatus was largely stimulated by components of the MLL, and (3) the enrichment of potato dextrose agar with any adsorbent material favored the fungal growth for 8 days after inoculation. A prompt relevant disappearance of EDs in the MLL occurred both without and, especially, with fungal activity, with the only exception of the very water soluble dimethoate that was poorly adsorbed and possibly degraded only during the first few days of experiments. An almost complete removal of phenolic EDs, especially EE2 and NP, occurred after 20 days or much earlier and was generally enhanced by the adsorbent materials used. Data obtained indicated that both adsorption and biodegradation mechanisms contribute significantly to MLL decontamination from the EDs studied and that the efficacy of the methodology adopted is directly related to the hydrophobicity of the contaminant.

This study focused on the effect of biogas sparging and different membrane modules such as cylinder shaped, funnel-shaped, and U-shaped on the membrane fouling behavior in a lab-scale submerged anaerobic membrane bioreactor (AnSMBR) which was operated for over 60 days. In order to investigate the membrane fouling behavior, a series of analysis such as SMP, EPS, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), particle size distribution, and filtration resistances were performed. Although the rapid generation of cake layer took placed in case of the absence of biogas sparging, the membrane module design mostly influenced the membrane resistance when biogas sparging was applied. Total resistance was the highest for U-shaped module. The permeate fluxes with biogas sparging were higher about one half and two times than those without biogas sparging. Cylinder-shaped module had the lowest SMP and EPS concentrations followed by U-shaped and funnel-shaped modules under both cases with and without biogas sparging. The total resistances of all membrane modules without biogas sparging were found to be very high compared the pore blocking resistances (Rₚ).

In this work, the removal of the worldwide non-steroidal anti-inflammatory drugs ibuprofen (IBP) and ketoprofen (KTP) by emulsion liquid membrane (ELM) was carried out. An ELM system is made up of hexane as diluent, Span 80 as the surfactant and sodium carbonate as the inner aqueous solution. Effect of experimental conditions that affect the extraction of IBP such as surfactant concentration, emulsification time, sulfuric acid concentration in external phase, acid type in external phase, internal phase concentration, type of internal phase, stirring speed, volume ratio of internal phase to membrane phase, treatment ratio, IBP initial concentration, diluent type and salt was investigated. The obtained results showed that by appropriate selection of the operational parameters, it was possible to extract nearly all of IBP molecules from the feed solution even in the presence of high concentration of salt. Under optimum operating conditions, the efficiencies of IBP removal from distilled water (99.3 %), natural mineral water (97.3 %) and sea water (94.0 %) were comparable, which shows that the ELM treatment process represents a very interesting advanced separation process for the removal of IBP from complex matrices such as natural and sea waters. Under the optimized experimental conditions, approximately 97.4 % KTP was removed in less than 20 min of contact time.